Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

TRIBHUVAN UNIVERSITY (12, Bold, Center Justified)

INSTITUTE OF ENGINEERING
THAPATHALI CAMPUS

A Project Report (12, Bold, Center Justified)

On
[Project Title]

Submitted By: (12, Bold, Center Justified)

[Student Name] ([Student Class Roll No.]) (12, Center Justified)
[Student Name] ([Student Class Roll No.])
[Student Name] ([Student Class Roll No.])
[Student Name] ([Student Class Roll No.])

Submitted To: (12, Bold, Center Justified)

Department of Electronics and Computer Engineering
Thapathali Campus (12, Center Justified)
Kathmandu, Nepal

November, 2016 (12, Center Justified)

 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

COPYRIGHT

The author has agreed that the Library, Department of Electronics and Computer
Engineering, Thapathali Campus, Institute of Engineering may make this report freely
available for inspection. Moreover, the author has agreed that permission for
extensive copying of this project report for scholarly purpose may be granted by the
supervisors who supervised the project work recorded herein or, in their absence, by
the Head of the Department wherein the project report was done. It is understood that
the recognition will be given to the author of this report and to the Department of
Electronics and Computer Engineering, Thapathali Campus, Institute of Engineering
in any use of the material of this project report. Copying or publication or the other
use of this report for financial gain without approval of to the Department of
Electronics and Computer Engineering, Thapathali Campus, Institute of Engineering
and author’s written permission is prohibited.

Request for permission to copy or to make any other use of the material in this report
in whole or in part should be addressed to:

Head

Department of Electronics and Computer Engineering

Thapathali Campus, Institute of Engineering

Lalitpur, Kathmandu

Nepal

i
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

ACKNOWLEDGEMENT

Your acknowledgement here. Your acknowledgement here. Your acknowledgement

here. Your acknowledgement here. (1 – 5 paragraphs)

[Student Name] (Class Roll No.: 072/BEX/101)

[Student Name] (Class Roll No.: 072/BEX/101)

[Student Name] (Class Roll No.: 072/BEX/101)

[Student Name] (Class Roll No.: 072/BEX/101)

ii
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

ABSTRACT

Your abstract here. Your abstract here . Your abstract here . Your abstract here . Your
abstract here . Your abstract here . Your abstract here . Your abstract here . Your
abstract here . (Maximum 2 paragraphs)

Keywords: [most frequently used words in your report (may be technology,

algorithms etc.) (Italic)

iii
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

Table of Contents

COPYRIGHT................................................................................................................i

ACKNOWLEDGEMENT...........................................................................................ii

ABSTRACT.................................................................................................................iii

List of Figures..............................................................................................................vi

List of Tables..............................................................................................................vii

List of Abbreviations................................................................................................viii

1. INTRODUCTION................................................................................................1

1.1 Background Introduction.............................................................................1

1.2 Motivation...................................................................................................1

1.3 Objectives....................................................................................................1

2. LITERATURE REVIEW....................................................................................2

2.1 Sub-heading 1..............................................................................................2

2.2 Sub-heading 2 and so on..............................................................................2

3. METHODOLOGY...............................................................................................3

3.1 Sub-Heading 1.............................................................................................3

3.1.1 Sub-heading of 5.1............................................................................3

3.2 Sub-heading 2..............................................................................................3

3.2.1 Sub-heading of 5.2............................................................................4

3.2.2 Sub-heading of 5.2............................................................................4

3.3 Sub-Heading 3.............................................................................................4

4. SYSTEM DESCRIPTION...................................................................................5

4.1 Sub-heading 1..............................................................................................5

4.2 Sub-heading 2..............................................................................................5

4.3 Sub Heading 3.............................................................................................5

5. RESULTS AND ANALYSIS...............................................................................6

5.1 Sub-heading 1..............................................................................................6

iv
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

5.1.1 Sub-heading 1 of 7.1.........................................................................6

5.2 Sub-heading 2..............................................................................................6

6. CONCLUSION AND FUTURE ENHANCEMENT.........................................7

6.1 Conclusion...................................................................................................7

6.2 Limitations...................................................................................................7

6.3 Future Enhancement....................................................................................7

7. APPENDICES.......................................................................................................8

Appendix A: Title...................................................................................................8

Appendix B: Title...................................................................................................8

References.....................................................................................................................9

v
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

List of Figures

Figure 5-1: Block Diagram of abc.................................................................................3

Figure 5-2: Block Diagram of abc.................................................................................3
Figure 5-3: Block Diagram of abc.................................................................................3
Figure 7-1: figure abc.....................................................................................................6

List of Tables

vi
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

Table 5-1 Name of Table...............................................................................................6

List of Abbreviations

CPP C Plus Plus

vii
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

IDE Integrated Development Environment

API Application Programming Interface

viii
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

1. INTRODUCTION

Your introduction here. Your introduction here. Your introduction here. Your
introduction here. Your introduction here. Your introduction here. Your introduction
here. Your introduction here.

1.1 Background Introduction

Your introduction here. Your introduction here. Your introduction here. Your
introduction here.

1.2 Motivation

Your introduction here. Your introduction here. Your introduction here. Your
introduction here.

1.3 Objectives

The main objectives of our project are listed below (maximum 2 points and to the
point):

 point 1
 point 2

1.4 Scope

Your Scope here.

1
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

2. LITERATURE REVIEW

(Contains all the existing works that have already been carried out in the field
related to your project topic. You have to explain each of the works as a separate
subtopic with following details:

 What is the work of existing/researched related topic?

 How it is done? used methods, techniques, technology, algorithms and any
new innovations of existing/researched related topic)
 Its importance or applications existing/researched related topic
 drawbacks and limitations existing/researched related topic
 Criticize the work of existing/researched related topic
 Link these criticisms on the existing/researched related topic to the
motivation explained in previous chapter. )

Your literature review here. Your literature review here. Your literature review here.
Your literature review here. Your literature review here. Your literature review here.
Your literature review here. Your literature review here [1].

2.1 Sub-heading 1

Your literature review here. Your literature review here. Your literature review here.
Your literature review here. Your literature review here. Your literature review here.
Your literature review here. Your literature review here [2].

2.2 Sub-heading 2 and so on

Your literature review here. Your literature review here. Your literature review here.
Your literature review here. Your literature review here. Your literature review here.
Your literature review here. Your literature review here [3].

2
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

3. METHODOLOGY

(It may contain the same thing (blocks or units) explained in the chapter 4 but
the explanation should be in details in a particular sequence in which you have
done your work along with detail algorithms, procedures, circuit diagrams or
others which illustrate the “how” part details) Your methodology here. Your
methodology here. Your methodology here. Your methodology here. Your
methodology here.

3.1 Sub-Heading 1

Your methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.

Center Justified Figure

Figure 3-1: Block Diagram of abc

3.1.1 Sub-heading of 3.1

our methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.

Center Justified Figure

Figure 3-2: Block Diagram of abc

3.1.1.1 Sub-heading of 3.1.1

Your methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.

Figure 3-3: Block Diagram of abc

3.2 Sub-heading 2

Your methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.
3
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

3.2.1 Sub-heading of 3.2

Your methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.

3.2.2 Sub-heading of 3.2

Your methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.

3.3 Sub-Heading 3

Your methodology here. Your methodology here. Your methodology here. Your
methodology here. Your methodology here.

4
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

4. SYSTEM DESCRIPTION

(It contains the details of the implementation of the things that have been
explained in the methodology. In short, it describes about how the methodology
is implemented. The implementation can be done using any programming
language, simulators or any other tools. Explain how you used your
programming language or tools to implement the methodology. You may also
include your language or simulator or tool specific algorithms or diagrams) Your
system description here.

4.1 Sub-heading 1

Your system description here. Your system description here. Your system description
here. Your system description here.

4.2 Sub-heading 2

Your system description here. Your system description here. Your system description
here. Your system description here.

4.3 Sub Heading 3

Your system description here. Your system description here. Your system description
here. Your system description here

5
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

5. RESULTS AND ANALYSIS

(It contains the result/output of your project. The output can be numeric or
graphical based. Represent or write down the results in tabular form if
applicable and analyze that by using graphs or charts. Also make a comparison
of your works with existing one(s))Your text here. Your text here. Your text here.
Your text here. Your text here. Your text here. Your text here. Your text here.

5.1 Sub-heading 1

5.1.1 Sub-heading 1 of 5.1

Your text here. Your text here. Your text here. Your text here. Your text here. Your
text here. Your text here. Your text here.

center justified Figure

Figure 5-4: figure abc

5.2 Sub-heading 2

Your text here. Your text here. Your text here. Your text here. Your text here. Your
text here. Your text here. Your text here.

Table 5-1 Name of Table

6
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

6. CONCLUSION AND FUTURE ENHANCEMENT

6.1 Conclusion

Your conclusion here. Your conclusion here. Your conclusion here. Your conclusion
here. Your conclusion here. Your conclusion here. Your conclusion here. Your
conclusion here. Your conclusion here. Your conclusion here. Your conclusion here.
Your conclusion here. Your conclusion here. Your conclusion here. Your conclusion
here. Your conclusion here. Your conclusion here. Your conclusion here. Your
conclusion here. Your conclusion here.

6.2 Limitations

Your Limitations here. Your Limitations here. Your Limitations here. Your
Limitations here. (You can list one by one).

6.3 Future Enhancement

Future Enhancement here. Future Enhancement here. Future Enhancement here.

Future Enhancement here. (You can list one by one).

7
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

7. APPENDICES

It may contains the additional topics or data sheets or reference sheets or even user
manual. The appendix name should be given as fillows.

Appendix A: Title

Your appendix A here

Appendix B: Title

Your Appendix B here

8
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

References

(Use IEEE format as follows. Note: This is auto generated reference, do not try
to type manually.)

[1] B. A., "Wireless Sensor Networks in Precision Agriculture," June 2005.

[2] C. Ayday and S. Safak, "Application of Wireless Sensor Networks with GIS on
the Soil Moisture Distribution Mapping," January 2009.

[3] Circuitbasics.com, " Useful Raspberry Pi Commands," [Online]. Available:

http://www.circuitbasics.com/useful-raspberry-pi-commands/. [Accessed Aug
2015].

[4] P. Wood, "Raspberry Pi and Custard for Schools," [Online]. Available:

http://www.rs-online.com/designspark/electronics/blog/raspberry-pi-and-custard-
for-schools. [Accessed 02 Sept 2015].

[5] Digi.com, "Documentation for XBee ZB (S2B) Modules," [Online]. Available:

http://ftp1.digi.com/support/documentation/90000976_W.pdf. [Accessed Jun
2015].

[6] B. Corporation, "Broadcam BCM2835 ARM Peripherals," Feb 2012. [Online].

Available: http://www.farnell.com/datasheets/1521578.pdf. [Accessed 2015 Jun
05].

[7] Raspberrypi.org, "GPIO: RASPBERRY PI MODELS A AND B," [Online].

Available: https://www.raspberrypi.org/documentation/usage/gpio/. [Accessed
Jun 2015].

[8] J. E. K. B. a. S. K. Vongsagon Boonsawat, "XBee Wireless Sensor Networks for

Temperature," 2010.

9
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

GUIDELINES

 Language must be English Language.

 You must use “Times New Roman” font with “Bold” and “Italic” variants
whenever needs (except in exported image/diagrams, screenshot of tables etc.).
 For Cover page (First page of this document) and Title page (Second page of this
document), use the font size and style as indicated in First page and Second page.
 From page number ‘i’ to end of the page use proper headings and paragraph
styles.
 For HEADING 1, use font size 12, style BOLD, UPPERCASE, Spacing (before:
0, after: 12, Line Spacing: 1.5).
 For HEADING 2, use font size 12, style BOLD, Spacing (before: 0, after: 10,
Line Spacing: 1.5).
 For HEADING 3, use font size 12, style BOLD, Spacing (before: 0, after: 8, Line
Spacing: 1.5).
 For HEADING 4, use font size 12, style BOLD, Spacing (before: 0, after: 6, Line
Spacing: 1.5).
 For HEADING 5, use font size 12, style BOLD, Spacing (before: 0, after: 6, Line
Spacing: 1.5) and so on.
 For Normal Paragraph, use font size 12, Spacing (before: 0, after: 18, Line
Spacing: 1.5).
 All Headings must be Left Justified.
 All normal paragraphs must be left and right justified that is fully justified.
 All the tables and figures must be centered justified.
 Page size must be standard A4 size.
 Page margin must be 1.5” at left and all other of 1”.
 Page number must be 0.5” from the bottom and centered at the bottom of the page
 Prefatory pages (before INTRODUCTION) should be numbered in Arabic
numbers (i, ii, iii…) and body part should be numbered in style (1, 2, 3…)
 You can start the numbering from title page but must not number the cover
page.

10
 Compiled by Saroj Shakya, IOE, Thapathali Campus | 2016

 For extensive table of contents and list of figures, you can use 1 line spacing
instead of 1.5 (For extensive Table of contents and list of figures only,
otherwise use 1.5 line spacing as normal paragraph)
 All the figures, tables, charts, equations etc. used in the reports must be numbered
using insert caption under reference of MS Word.
 Reference must be used in ascending order (It means if you use [1] reference in
page 5 and reference [2] in page 6 then you must not use reference [3] in page 5)
using IEEE format.
 Reference should not be numbered as chapter.

11