Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Preselector de Recepciontwds-2023

    Uploaded by

    Carlos Cabrera
    The document describes Telewave TPCP-4544, 4546, and 4548 UHF Bandpass Preselectors. The preselectors provide optimum receiver protection by rejecting external noise sources and only allowing signals within a selected pass window. They consist of 4, 6, or 8 series-connected cavities and are available in a range of pass bandwidths and frequencies between 400-512 MHz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Preselector de Recepciontwds-2023

    Uploaded by

    Carlos Cabrera
    13 views1 page
    The document describes Telewave TPCP-4544, 4546, and 4548 UHF Bandpass Preselectors. The preselectors provide optimum receiver protection by rejecting external noise sources and only allowing signals within a selected pass window. They consist of 4, 6, or 8 series-connected cavities and are available in a range of pass bandwidths and frequencies between 400-512 MHz.

    Original Title

    PRESELECTOR DE RECEPCIONTWDS-2023

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes Telewave TPCP-4544, 4546, and 4548 UHF Bandpass Preselectors. The preselectors provide optimum receiver protection by rejecting external noise sources and only allowing signals within a selected pass window. They consist of 4, 6, or 8 series-connected cavities and are available in a range of pass bandwidths and frequencies between 400-512 MHz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views1 page

    Preselector de Recepciontwds-2023

    Uploaded by

    Carlos Cabrera
    The document describes Telewave TPCP-4544, 4546, and 4548 UHF Bandpass Preselectors. The preselectors provide optimum receiver protection by rejecting external noise sources and only allowing signals within a selected pass window. They consist of 4, 6, or 8 series-connected cavities and are available in a range of pass bandwidths and frequencies between 400-512 MHz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    400 - 512 MHz

    TPCP-4544, -4546, -4548


    UHF BANDPASS PRESELECTOR

    Telewave TPCP-4544, 4546, and All units are factory tuned to


    4548 UHF Bandpass Preselectors customer-supplied frequencies
    are specially designed for use with and no further adjustment should
    master receive systems, to ensure be necessary. Field re-tuning or
    rejection of external noise sources. adjustment of insertion loss can be
    These bandpass preselec tors accomplished quickly if needed.
    provide optimum receiver desense
    protection when installed between
    the receiver multicoupler and the TPCP-4546
    antenna. Their high power capability
    also allows these units to be used
    as sideband filters on the outputs
    of transmitters or transmitter
    combiners. TYPICAL FILTER RESPONSE CURVES
    0 0
    Bandpass preselectors reject all TPCP-4544
    TPCP-4546
    signals outside a selected pass 10 2 TPCP-4548

    window, and are often preferred 20 4


    Attenuation (dB)

    at congested sites.
    30 6
    These bandpass filters consist of 4,
    40 8
    6, or 8 series-connected cavities,
    50 10
    and are available in a wide range
    of pass bandwidths. Each model
    4
    54

    60 12
    -4
    CP
    TP

    features “sharp-skirt” selectivity 70 14


    46

    548
    -45

    with minimum insertion loss. For


    P-4
    CP

    TPC
    TP

    optimum per formance, these -8 -6 -4 -2 Fo +2 +4 +6 +8 -4 -3 -2 -1 Fo +1 +2 +3 +4

    bandpass filters are custom tailored Frequency (MHz)


    to meet individual requirements.
    Multiple-window configurations
    can be provided when more than SPECIFICATIONS TPCP-4544 TPCP-4546 TPCP-4548
    one pass band is required. Frequency range 400-512 MHz
    Heavy duty materials are used Bandpass (typ) 2 MHz 4 MHz 4 MHz
    throughout the bandpass filters Attenuation (+/- 5 MHz) 50 dB 55 dB 80 dB
    to insure top performance and Insertion loss (typ) 1.5 dB 2.0 dB 3.0 dB
    long life, and RG-214 Mil-Spec Power input (max) 350 watts
    cable is used for interconnections. Impedance / VSWR (max) 50 ohms / 1.5:1
    Temperature stability is maintained Temperature range -30°C to +70°C
    from -30 to +70°C by the use of
    Number of cavities / size 4 / 4” 6 / 4” 8 / 4”
    temperature compensators, and
    Connectors N Female, UHF (opt.)
    threaded invar rod. Tuners are
    silver plated and sliding contacts Dimensions (HWD) in. 5.25x19 x10.5 7 x19 x10.5 8.75x19x10.5
    cm 13 x 48 x 27 18 x 48 x 27 22 x 48 x 27
    are made with beryllium copper
    Mounting 19” rack mount
    fingerstock. All models are 19”
    rack-mountable, and come with N Finish Alodine / Gray acrylic enamel
    Female connectors. Net weight lb. (kg) 10 (4.5) 16 (7.3) 20 (9.1)
    Shipping weight lb. (kg) 14 (6.4) 24 (11) 28 (12.7)

    All specifications subject


    Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
    TWDS-2023 Rev. 10/12

    You might also like