2-2448108-2

Housing for Male Terminals, Wire-to-Wire, 2 Position, .215 in [5.46 mm] Centerline,
2-2448108-2
Sealable, Green, Wire & Cable, Power & Signal, DEUTSCH DT
 ACTIVE

DEUTSCH | DEUTSCH DT
TE Internal #: 2-2448108-2
Housing for Male Terminals, Wire-to-Wire, 2 Position, .215 in [5.46
mm] Centerline, Sealable, Green, Wire & Cable, Power & Signal,
DEUTSCH DT
View on TE.com >

Connectors > Automotive Connectors > Automotive Housings > DEUTSCH DT Color Connectors

Connector System: Wire-to-Wire

Number of Positions: 2
Connector & Housing Type: Housing for Male Terminals
Centerline (Pitch): 5.46 mm [ .215 in ]
Sealable: Yes

All DEUTSCH DT Color Connectors (48)

Features

Product Type Features

Mixed & Hybrid Connector No

Connector Shape Rectangular

Connector System Wire-to-Wire

Connector & Housing Type Housing for Male Terminals

Sealable Yes

Connector & Contact Terminates To Wire & Cable

Primary Locking Feature Integrated in Housing

Configuration Features

Blank Cavity Position 0

Connector Seal Code N Seal

Number of Positions 2

Number of Rows 1

Electrical Characteristics
 For support call +1 800 522 6752 05/31/2024 05:24AM |Page 1
 2-2448108-2
Housing for Male Terminals, Wire-to-Wire, 2 Position, .215 in [5.46 mm] Centerline,
Sealable, Green, Wire & Cable, Power & Signal, DEUTSCH DT

Electrical Characteristics

Operating Voltage 250 VAC

Nominal Voltage Architecture 12 V, 24 V, 48 V

Body Features

Cable Exit Angle 180°

Primary Product Color Green

Contact Features

Contact Size Size 16

Contact Type Pin

Mating Pin Diameter 1.59 mm[.063 in]

Contact Current Rating (Max) 13 A

Mechanical Attachment

Terminal Position Assurance Yes

Strain Relief Add By Accessory

Mating Alignment Type Polarized

Mating Alignment With

Connector Mounting Type Cable Mount (Free-Hanging)

Housing Features

Housing Material PA GF

Centerline (Pitch) 5.46 mm[.215 in]

Dimensions

Connector Height 17.02 mm[.67 in]

Product Width 17.15 mm[.675 in]

Product Length 43.38 mm[1.708 in]

Compatible Insulation Diameter Range 1.35 - 3.05 mm[.053 - .12 in]

Usage Conditions

Operating Temperature (Max) 125 °C[257 °F]

Operating Temperature Range -55 - 125 °C[-67 - 257 °F]

Operation/Application

Circuit Application Power & Signal

Industry Standards

Degree of Protection IP68, IP6K9K

 For support call +1 800 522 6752 05/31/2024 05:24AM |Page 2

 2-2448108-2
Housing for Male Terminals, Wire-to-Wire, 2 Position, .215 in [5.46 mm] Centerline,
Sealable, Green, Wire & Cable, Power & Signal, DEUTSCH DT

Degree of Protection IP68, IP6K9K

Compatible With Agency/Standards Products SAE J2030

UL Flammability Rating 12mm Flame Test per Standard UL-94

Other

Serviceable Yes

Connector Position Assurance Capable No

Product Compliance
For compliance documentation, visit the product page on TE.com>

EU RoHS Directive 2011/65/EU Compliant

EU ELV Directive 2000/53/EC Compliant

China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold

EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2024
(240)
Candidate List Declared Against: JAN 2024
(240)
SVHC > Threshold:
Octamethylcyclotetrasiloxane (D4) (.5% in
Component Part)
Dodecamethylcyclohexasiloxane (D6) (.5%
in Component Part)
Decamethylcyclopentasiloxane (D5) (.5% in
Component Part)
Article Safe Usage Statements:
Wash thoroughly after handling. Recycle if possible and dispose of the article by
following all applicable governmental regulations relevant to your geographic
location.

Halogen Content Not Low Halogen - contains Br or Cl > 900

ppm.

Solder Process Capability Not reviewed for solder process capability

Product Compliance Disclaimer

This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE's information on SVHC in
articles for this part number is still based on the European Chemical Agency (ECHA) 'Guidance on requirements for
substances in articles'(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished
product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An
Article Always An Article) stating that, in case of 'complex object', the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling
based on the new ECHA "Guidance on requirements for substances in articles" (June 2017, version 4.0) and will be
updating its statements accordingly.

 Compatible Parts
For support call +1 800 522 6752 05/31/2024 05:24AM |Page 3
 2-2448108-2
Housing for Male Terminals, Wire-to-Wire, 2 Position, .215 in [5.46 mm] Centerline,
Sealable, Green, Wire & Cable, Power & Signal, DEUTSCH DT

Compatible Parts

TE Part # CAT-D487-W416 TE Part # CAT-D48-SP729 TE Part # CAT-D48-ST273 TE Part # CAT-D487-M8649

Wedgelocks: DEUTSCH DT DEUTSCH Sealing Plugs DEUTSCH Solid Contacts DEUTSCH DT Mounting Clips

TE Part # CAT-J67-DSCC16 TE Part # 776364-1 TE Part # DT-RT1 TE Part # DT2P-BT-BK

DEUTSCH Size 16 Crimp Contacts SEALING PLUG, SZ 20 CAVITY EXT TOOL, FRONT RELEASE BOOT, 2P, REC, ST, BLK

TE Part # 1924487-2 TE Part # 2-2448100-2 TE Part # DT2P-BT TE Part # 2300908-1

MOUNTING CLIP, AMPSEAL 16 2POS,DIA 1.6MM,SOC HSG ASSY,SLD, BOOT, 2P, REC, ST, GRY 0460-003-16329, PIN, SOLID, 20-
N,GREEN 24AWG, AU

TE Part # CAT-D48-SFT273
DEUTSCH Stamped and Formed
Contacts

Also in the Series DEUTSCH DT

Automotive Connector Caps & Covers Automotive Connector Locks & Automotive Housings(654) Connector Backshells(61)
(19) Position Assurance(86)

 For support call +1 800 522 6752 05/31/2024 05:24AM |Page 4

 2-2448108-2
Housing for Male Terminals, Wire-to-Wire, 2 Position, .215 in [5.46 mm] Centerline,
Sealable, Green, Wire & Cable, Power & Signal, DEUTSCH DT

Connector Seals & Cavity Plugs(6) Connector Strain Relief(28) Insertion & Extraction Tools(3) Other Automotive Connector
Accessories(28)

PCB Headers & Receptacles(105)

Documents

Product Drawings
2POS,DIA 1.6MM,PIN HSG ASSY,SLD,N,GREEN

English

CAD Files
3D PDF

3D
Customer View Model
ENG_CVM_CVM_2-2448108-2_A.2d_dxf.zip

English
Customer View Model
ENG_CVM_CVM_2-2448108-2_A.3d_stp.zip

English
Customer View Model
ENG_CVM_CVM_2-2448108-2_A.3d_igs.zip

English
By downloading the CAD file I accept and agree to the Terms and Conditionsof use.

Product Specifications
Engineering Report

English

 For support call +1 800 522 6752 05/31/2024 05:24AM |Page 5