CS601 Quiz-2 by Vu Topper RMwwe

CS-601 Data Communication
Update MCQS For Quiz-2 File

Solve By Vu Topper RM
85% To 100% Marks
For More Help Contact What’s app 03224021365

Binary ___________ is also called On-OFF Keying.
A. PSK
B. FSK
C. QAM
D. ASK
______________ is a type of serial transmission in which timing of

Signal is unimportant as information received is agreed upon certain
agreements between sender and receiver.
A. Synchronous
B. Metasochronous
C. Isochronous
D. Asynchronous
___________ are known as identical objects in Network layer.

A. Datagrams
B. Messages
C. Frame
D. Bits
Reliability of network is measured by _______.

A. Accuracy
B. Delay
C. Jitter
D. Throughput
In __________ scheme, the bit is 0 if there is no change and the bit is 1

if there is a change.
A. NRZ
B. NRZ-L
C. Unipolar
D. NRZ-I

The conversion of analog sample of the signal into digital form is called
___________ process.
A. Sampling
B. Quantizing
C. Quantizing and Sampling
D. Modulation
The communication at the Application, Transport and Network layer is

___________.
A. Physical
B. Rational
C. Logical
D. Real
In Manchester and differential Manchester encoding schemes, the signal

rate is ________ than that of NRZ.
A. Triple
B. Double
C. Lower
D. Equal
Which multiplexing technique shifts each signal to a different carrier

frequency?
A. TDM
B. FDM
C. WDM
D. PDM
If 7 stations are to be connected in a Mesh topology, the number of full

duplexed dedicated links would be:
A. 26
B. 21
C. 7

D. 14
The fiber optic possess layer of_____ right inside after outer jacket.
A. Cladding
B. Core
C. Plastic Buffer
D. DuPont Kevlar
A digital signal is expressed through _______ values.

A. Digital
B. Analog
C. Periodic
D. Discrete
TCP/IP protocol suite has _____ layers.

A. 6
B. 7
C. 5
D. 4
A connecting device ____________________ in a network

A. Controls network traffic and facilitates data transfer between
devices.
B. Provides power supply to network devices.
C. Manages network security
D. Determines the type of data transmitted in the network.
Routing is the function of _____________ layer.

A. Transport
B. Datalink
C. Physical
D. Network

In baseband transmission, a digital signal is transmitted as __________.
A. Multiplexed signal
B. Modulated signal
C. Analog signal
D. Digital signal
___________ is the encoded message sent from one station to another

when they are connected securely.
A. Cryptogram
B. Cipher Text
C. Encrypted data
D. Secure message
Multi-mode technology has ______________main types for light

propagation.
A. 3
B. 2
C. 5
D. 4
Which communication mode allows data transmission in one direction
only, without any feedback or response from the receiving device?
A. Bidirectional
B. Half Duplex
C. Simplex
D. Full Duplex
Bandwidth in hertz is the range of ___________contained in a composite

signal.
A. Amplitudes
B. Phases
C. Frequencies
D. Signals

Current technology supports ___________modes for propagation of
light.
A. 2
B. 4
C. 5
D. 3
The fiber optic cable of type 7/125 is of _____ mode.

A. Multimode, graded index
B. Single mode, graded index
C. Multimode, step index
D. Single mode, step index
Coaxial cable carries signals of higher frequency ranges than those in

_____________ cable.
A. Television
B. Twisted pair
C. T Lines
D. Fiber optic
Which multiplexing technique involves signals composed of light
beams?
A. TDM
B. WDM
C. FDM
D. PDM
While implementing Binary ASK or On-Off Keying (OOK), the binary

number 1 is used for --------.
A. binary stream of 1s
B. Numbers of 1s in data
C. No amplitude
D. Maintaining the amplitude

In frequency shift keying, _________ remain(s) constant.
A. Both Amplitude and Phase
B. Amplitude
C. Both Phase and Frequency
D. Frequency
Both ----------- remain constant in Frequency Shift Keying.

A. frequency and amplitude
B. bit rate and phase
C. phase and baud rate
D. amplitude and phase
____________ technique does not follows analog to analog conversion.

A. PM
B. AM
C. FM
D. QAM
In statistical time division multiplexing, number of slots in frame are less

than ____________.
A. Multiplexed T lines
B. Input frequency
C. Output data rate
D. Input lines
In the analog transmission of digital data,the baud rate is

_______________ to the bit rate.
A. less than or equal
B. greater than
C. less than
D. greater than or equal
PSK is ________ susceptible to noise as compared to ASK.

A. Equally
B. More
C. Highly
D. Less
Technique that allows the simultaneous transmission of multiple signals

across a single data link, is known as _____________.
A. Encryption
B. Multiplexing
C. Compressing
D. Demodulating
Television broadcast where user can only view the information sent in
the form of video is an example of____________ communication.
A. Simplex
B. Complex
C. Full duplex
D. Half duplex
_____________is Shannon capacity formula to determine highest
theoretically data rate for a noisy channel.
Capacity=Bandwidth*log2(1+SNR)
Two stations are connected via a secure link in which messages are
encrypted from source to the destination. This encrypted message is
called ___________ .
A. Message
B. Protocol
C. Plain text
D. Cipher text
Taking off the header from the message is called

___________________.
A. Stuffing

B. Layering
C. Encryption
D. Decapsulation
____________ is the range of frequencies contained in a composite

signal.
A. Noise
B. Phase
C. Amplitude
D. Bandwidth
_______is the data format used at Transport layer of TCP/IP Protocol

suite.
A. packet
B. segment ok
C. bit
D. frame
Mr. Asif while sitting in Lahore is talking with his friend in Dubai
through Skype is an example of _________.
A. Wide Area Network
B. Local Area Network
C. Home Based Network
D. Metropolitan Area Network
In a complex network communication, we need a protocol at each layer,

this process is called ____________.
A. Topology
B. Encryption
C. Protocol Layering
Question No:1 (Marks:1) Vu-Topper RM

The most common type of connector used by coaxial cable is
___________.
A. BNC
B. RJ-11
C. RJ-57
D. RJ-45

Quadrature Amplitude Modulation is the mechanism of
_______________ conversion.
A. Digital to analog ok
B. Analog to Analog
C. Analog to digital
D. Digital to digital

______________have established standards for using these signals for
communication between devices such as keyboards, mice, PCs, and
printers.
A. Microwaves
B. Radio waves
C. Simple waves
D. Infrared waves ok

WDM stands for __________________.
A. Worst Data Manipulation
B. Wideband De-Modulation
C. Wideband Division Multiplexing
D. Wavelength Division Multiplexing ok

Voltage controlled oscillator(VCO) generates ________________ .

A. Carrier Signals
B. Periodic signals Google ok
C. Signal elements
D. Composite Signals

A virtual-circuit network operates on ____________ layer.
A. Network Google
B. Physical
C. Datalink
D. Application

Top most organization that provides support for the Internet Standard
process is called _________.
A. Internet Society (ISOC)
B. Internet Architecture Board (IAB)
C. IETF ok
D. IRTF

In pulse code modulation the term sampling can also be referred
as____________.
A. Pulse Amplitude Modulation
B. Pulse sample Modulation
C. Pulse line modulation
D. Pulse Frequency Modulation

Unit of phase is _______.
A. Watts
B. Bauds
C. Degree

D. Bits per second

Entire band in United States is regulated by______________ authorities.
A. ITU
B. FCC
C. ANSI
D. NASA

In TDM based digital hierarchy used by the Telephone companies, DS-
0 is a single digital channel of
A. 64 kbps
B. 32 kbps
C. 128 kbps
D. 1.544 Mbps

Radio waves are propagated in____________ whenever they are
transmitted by an antenna.
A. All direction
B. Left direction
C. Right direction
D. Only up and down direction

A switched network consists of a series of interlinked _____ called
switches.
A. Root
B. Nodes Google
C. Points
D. System

In circuit switched networks we have low efficiency but minimal
________.
A. Delay
B. Error
C. Speed
D. Throughput

In transmission impairments __________noise occurs from the random
motion of electrons in a wire.
A. Thermal noise ok
B. Impulse noise
C. Cross talk
D. Induced noise

In Amplitude Shift Keying, _________ of the signal is /are changed.
A. Amplitude and Frequency
B. Amplitude ok
C. Frequency and Amplitude
D. Phase

A twisted pair cable consists of ____________conductors.
A. Two
B. Five
C. Four
D. Three

We quantize the sampling output into certain levels based on range
of___________ and required accuracy.

A. Frequency
B. Amplitude
C. Time period
D. None

In star based network comprising of four computers and one switch, total
number of cables needed will be_______.
A. 1
B. 2
C. 3
D. 4

Which of the following is not a characteristic of a sine wave?
A. Amplitude
B. Segmentation ok
C. Phase
D. Frequency

In a computer network, five stations are connected to each other in such
a way that each station is connected to every other station through
dedicated links. This makes____________ topology.
A. Bus
B. Ring
C. Star
D. Mesh

________________ can be published using Request for Comments
(RFCs).
A. Proposed Standard

B. Draft Standard
C. Internet Draft
D. Internet Standard

In serial data transmission _______________ data transmission mode
can be cheap but slower.
A. Synchronous
B. Asynchronous
C. Isochronous
D. Metachronous

QPSK stands for ________.
A. Quality phase shift key
B. Queuing phase shift key
C. Quadrature phase shift key ok
D. Quality physical shift key

In __________________, the instantaneous change in the carrier
frequency is proportional to the derivative of the amplitude of the
modulating signal.
A. Phase modulation
B. Frequency modulation ok
C. Amplitude modulation
D. Quadrature modulation

In FSK, Baud rate is less than or equal to ______________ rate.
A. Bit ok
B. Byte
C. Signal

D. Decibel

Bi-polar uses ____________voltage levels.
A. One
B. Two
C. Three
D. Four

Low pass channel has ______ bandwidth between two stations.
A. Dedicated
B. Shared
C. Multiplexed
D. Infinite

Them on the transmission medium.
A. Application
B. Physical
C. Network
D. Transport

Block coding scheme contains______________ number of steps.
A. 3
B. 4
C. 5
D. 6

BFSK stands for _________.

A. Baud Frequency Shift Key
B. Binary Frequency Sift Key ok
C. Barrier Frequency Shift Key
D. Bridge Frequency Shift Key

According to the Fourier analysis, frequencies obtained after
decomposition of digital signals are____________.
A. Continuous
B. Discrete
C. Bit length
D. Homogeneous

Suppose a signal is amplified then the value of decibel will be______.
A. 0
B. 1
C. Negative
D. Positive

In frequency domain plot, which value is replaced with frequency?
A. Wavelength
B. Amplitude
C. Phase
D. Time

We can have _________different groups with a 4 bit block.
A. 4 ok
B. 6
C. 7
D. 8

________ means loss of energy in signal.
A. Noise
B. Delay
C. Attenuation ok
D. Distortion

Uni polar, polar and bipolar are the types of —————
A. Line
B. Differential Manchester
C. NRZ-I
D. Block

If a digital transmission system is sending five bits in every half a second,
the bit-rate of the system.
A. 5 bps
B. 10 Hz
C. 50 bps
D. 0.2 bps

________ signal completes certain pattern in a specific amount of time.
A. Non-periodic
B. Periodic
C. A Periodic
D. Wavelength

To calculate the data rate for noisy channel __________ formula is used.
A. Shannon

B. Nyquist bit rate
C. Propagation
D. Greedy

_____________ mode of serial transmission guarantees fixed rate data.
A. Synchronous
B. Asynchronous
C. Isochronous ok
D. Metasochronous

In TCP\IP model, the Physical Layer exchanges data in the form of ___.
A. Packets
B. Frames
C. Bits
D. Segments

___________________ signal is represented by the discrete values.
A. Analog
B. Digital
C. Both
D. Continuous

A common Bipolar encoding scheme is called ___________.
A. AMI ok
B. NRZ
C. RZ
D. QAM

_________ relatively measures the strength of two signals.
A. Signal rate
B. Bit rate
C. Decibel ok
D. Pulse rate

Two PCs and one printer are connected in a network within a room; it is
an example of ___________.
A. LAN
B. WAN
C. MAN
D. ALN

In analog transmission of digital data, the required bandwidth is always
proportional to the signal rate except in _______, a digital to analog
conversion technique.
A. ASK ok
B. NSK
C. FSK
D. PSK

A local telephone network use __________ network.
A. Line switched
B. Circuit switched
C. Bit switched
D. Packet switched

In an analogue hierarchy to carry voice channels, a super group has
________ bandwidth.
A. 60kHz ok
B. 240 Hz
C. 240 kHz
D. 120 kHz

Narrow bands of light in wave division multiplexing are denoted by
_______.
A. α
B. β
C. λ ok
D. π

Which digital multiplexing technology is use to allow several
connections to share the high bandwidth of a l
A. TDM
B. FDM
C. ADM
D. WDM

In optical fiber cable, the ratio of the diameter of their core to the
diameter of their cladding, both expressed in _____________.
A. Meters
B. Millimeters
C. Centimeters
D. Micrometers ok

Wireless transmission can be divided into ____________ broad groups.

A. One
B. Two
C. Three
D. None of these

____________ is the sub type of Time Division Multiplexing Technique.
A. Light TDM
B. Barrier TDM
C. Statistical TDM ok
D. Amplitude TDM

Simultaneous transmission of multiple signals across a single data link is
called ___________.
A. Multiplexing ok
B. Demultiplexing
C. Modulation
D. Demodulation

Cellular telephone uses __________waves for communication.
A. Radio waves
B. light wave
C. infrared waves
D. microwaves

Time division multiplexing is used in ____________ systems.
A. Digital Google
B. Analog
C. Hybrid
D. Automated

A telephone line analog signal has got the bandwidth of __________.
A. 8kHz
B. 4kHz ok
C. 16kHz
D. 12kHz

In _____________, modulation process is used by the transmitting
devices to shift their data to a specific carrier frequency for multiplexing.
A. FDM ok
B. ADM
C. DAM
D. SDM

A fiber-optic cable transmit signals in the form of ____________.
A. Light
B. Waves
C. Sound
D. None of the given

If the message is going to pass through a packet-switched network, it can
be divided into packets of __.
A. Fixed size
B. Variable size
C. Both fix and variable size
D. None of the these

Paging System in data communication uses ________ waves.

A. Radio waves
B. light wave
C. infrared waves
D. microwaves

According to stats, fewer than _____________ crossbar points can be
used at once.
A. 14%
B. 25%
C. 30%
D. 100%

Virtual Circuit Identifier is the ________________ of packet.
A. Length
B. Header
C. Size
D. Address

In unidirectional antenna, the common point where all the lines intersect
each other is ___.
A. Axis
B. Focus
C. Origin
D. Center

The size of the packet is determined by the network and _________.

A. Governing Protocol
B. Instructions
C. Switching time
D. Delay

In virtual circuit approach when a frame enters a switch and when it
leaves the circuit then its VCI ___
A. Remain same
B. Sometimes changes
C. Remain the same
D. Always changes

In __________ TDM, slots are dynamically allocated to the connected
stations to improve bandwidth efficiency.
A. Statistical
B. Isochronous
C. Synchronous ok
D. None of the given

In synchronous ____________, the data flow of each input connection is
divided into units, where each input occupies one input time slot.
A. FDM
B. TDM Google ok
C. WDM
D. DWDM

When the bandwidth of a link is greater than the combined bandwidths
of the signals, we use ____________ multiplexing.
A. Frequency division ok

B. Time division
C. Hybrid division
D. Wavelength division

Routing is a function of____________ layer.
A. Network
B. Physical
C. Transport
D. Datalink

___________ is the process of converting binary data to a digital signal.
A. QAM
B. ASK
C. FSK
D. Line coding ok

__________ signals can take infinite levels of intensity over time.
A. Digital
B. Discrete
C. Analog
D. Logical

During transmission, _______________ is the effect of one wire on the
other.
A. Crosstalk ok
B. Induced noise
C. Thermal noise
D. Thermal noise

Latency is made of ___________components.
A. Two
B. Five
C. Four ok
D. Three

If a digital signal has four levels, then we need _________ bits to
represent each level.
A. 2 ok
B. 4
C. 6
D. 8

___________ is a digital process that allows connections to share the
high bandwidth of a link.
A. TDM
B. FDM
C. ADM
D. WDM

Transmission medium are of _______ types.
A. One
B. Two
C. Six
D. Five
______________are used for multicast communications, such as radio
and television.
A. Radio waves ok

B. light wave
C. infrared waves
D. microwaves

We can have combination of ___________possible codes with a 5-bit
code.
A. 30
B. 32 ok
C. 34
D. 36

When two people are talking to each other in a room then transmission
medium between them is:
A. Air
B. Cable
C. Wireless medium
D. No medium required

Manchester encoding scheme achieves the same level of synchronization
as____________.
A. ARZ
B. RZ ok
C. ARZ1
D. IMP

Coaxial cables are categorized by their_____________ ratings.
A. Radio Government (RG)
B. Frequency modulation (FM)
C. Amplitude modulation (AM)

D. Electronic Industries Association (EIA)

Microwaves are ______________.
A. Bi directional
B. Unidirectional ok
C. Multi directional
D. Omni directional

A virtual-circuit network is a cross between a ______________ network
and a datagram network.
A. Circuit-switched
B. Packet switched
C. Message switched
D. Both message and packet switched network

In ___________ multiplexing technique, guard bands are used to avoid
overlapping of frequency bands assigned to each user.
A. FDM Google ok
B. TDM
C. PDM
D. CSMA

In __________ TDM, each input connection has an allotment in the
output even if it is not sending data.
A. Statistical
B. Isochronous
C. Synchronous Google ok
D. Asynchronous

Cable TV uses the _______________category of coaxial cable.
A. RG-47
B. RG-58
C. RG-59 ok
D. RG-11

Connection setup means using ______channels in circuit switched
network.?
A. Satellite
B. Both
C. Communication
D. None of the these

Modulation of analog signal is needed if the medium is ___________ in
nature.
A. Bi-pass
B. Low-pass
C. Bandpass
D. High-pass

Quadrature Amplitude Modulation (QAM) is the combination of
________ and __________.
A. PSK, FSK
B. FSK, PSK ok
C. ASK, FSK.
D. ASK, PSK

___________ is the scope of VCI variable in virtual circuit approach.

A. Local
B. Global
C. Both
D. None of these

N=Sxr is the formula for finding ___________ .?
A. Bit rate
B. Baud rate Google ok
C. Data element
D. Signal element

In ________________ TDM, a round of data units from each input
connection is collected into a frame.
A. Statistical
B. Non-Periodic
C. Synchronous
D. Asynchronous

VCI address is _____________ address in virtual circuit approach.
A. Local
B. Global
C. Private
D. Variable

Virtual-Circuit Networks and datagram networks are the sub categories
of ________________.
A. Packet-switched networks
B. Circuit Switched Networks

C. Message switched networks
D. Both circuit and message switched networks

Electromagnetic waves ranging in frequencies between 1 and 300 GHz
are called_____________.
A. Light wave
B. Microwaves
C. Radio waves
D. Infrared waves

_____ has less electromagnetic interference as compared to other guided
medium.
A. Coaxial
B. Fiber Optic
C. Shielded Twisted Pair
D. Unshielded Twisted Pair

In an analogue hierarchy to carry voice channels, a group can carry
_______ voice channels.
A. 60
B. 12 ok
C. 10
D. 20

In ASK correct formula for calculating the bandwidth is as
___________.
A. B=(1+d)S ok
B. B=(1*d)S
C. B=(d-1)S

D. B=(d-5)S

Switching at the _____layer in the traditional telephone network uses the
circuit-switching approach.
A. Data Layer
B. Session Layer
C. Physical Layer Google
D. Network Layer

In case of Frequency shift key, the difference between two frequencies
is represented as_______.
A. 2 Δ ok
B. 4 Δ
C. 6 Δ
D. 2X5 Δ

Datagram approach and virtual circuit approach are two popular
approaches which lead us to ______________.
A. Line switching
B. Packet switching
C. Circuit switching
D. Dynamic switching

The minimum bandwidth required for QAM transmission is the same as
that required for ________ and ________ transmission.
A. ASK, PSK ok
B. FSK, ASK
C. PSK, FSK

D. FSK, QPSK

In circuit switching total Delay is combination of Connection Time, Data
transfer time and _______________.
A. Switching time
B. Receiving time
C. Acknowledgement time
D. Connection tear down time

RG-11 having impedance of 50 Ohm is used in ______ Ethernet.
A. Thin
B. Fast
C. Thick
D. None of these

Line coding scheme is roughly divide into___________ broad
categories.?
A. Five
B. One
C. Two
D. Zero

Normally the value of K max in pure ALOHA is ________.
A. 15
B. 14
C. 13
D. 12

YMODEM has ________ Byte of data unit.
A. 1024
B. 2410
C. 2210
D. 1042

In Block coding scheme, number of code words is always ________ data
words.
Equal to

Which one of the following is not a Channelization Protocol?
CSMA

________ is an Authentication Protocol, which uses two-step process to
authenticate user information.
PAP

The transmission medium that carries the message is referred to as the
___________.
Communication channel

Which error detection method uses one's complement arithmetic
Checksum

Like 10 Base 5, 10 Base 2 is a ________ topology LAN.
Bus

There are _________ types of serial transmission
2

___________ and ______are the two types of addressing in virtual
circuit approach.
A. Local, Global
B. Private, Public
C. Variable, Dynamic
D. Dependent, Independent

Bandwidth can be measured in _______________.
bits per second bps

A variation of AMI encoding is called as ____________.
Polar
Uni-code
Uni-polar
Pseudoternary

For a noiseless channel, theoretical formula to calculate the data rate was
developed by ____________.
A. Rivest
B. Nyquist Google ok
C. Shannon
D. Hamming

In ___ scheme the voltages are on both sides of the time axis and voltage
level for 0 can be positive ant the voltage level for 1
Polar

Polar encoding scheme uses ___________ voltage level.
2
4
6
8

In a bidirectional communication each layer performs two ____ tasks in
each direction.
Opposite

In ______________ Scheme, all the signal levels are on one side of the
time axis, either above or below.
A. Polar
B. Bipolar
C. Unipolar Google
D. Multiplexed coding

Manchester and differential Manchester encoding schemes are subtypes
of _______ encoding scheme.
Double

In _______ transmission medium start and stop bits are used
Asynchronous

In Ring topology, each node has a point to point dedicated link with.
Exactly 2 nods

Simple sine wave can be used to send -------- .
Amplitude

__________________ layer converts frames coming from Data Link
layer into bits and sends them on the transmission medium.
A. Network
B. Physical
C. Transport
D. Application

The maximum bandwidth required for QAM transmission is the same as
that required for _ and _______ transmission.
ASK, PSK

In ____________ transmission mode(s), multiple bits are sent
simultaneously.
Serial
Parallel
Sequential
In Serial and Parallel

Which of following technique(s) is used for Analog-to-Digital
Conversion.
A. Bit Modulation(BDM)
B. Delta Modulation (DM)
C. Pulse Code modulation (PCM) ok
D. Both Pulse Code and Delta Modulation

_________ is correct formula to determine the total number of ports
needed for one system connected in a mesh network.
N*(N-1)

In _________ encoding scheme, the voltage level oscillates between a
positive and a negative value although it may remain at zero level
between the two values.
A. Polar
B. Bi-Polar
C. Uni-Polar
D. Non-Polar

________ is the number of bits sent in 1 second.
A. Period
B. Bit rate Google
C. Latency
D. Frequency

Wavelength binds the ------- of a simple sine wave to the propagation
speed of the medium.
A. Phase

B. Amplitude
C. Bandwidth
D. Period of the frequency Page 61 ok

The Full form of AMI encoding scheme is ____________.
A. Alternate state inversion
B. Alternate mark inversion ok
C. Alternate multiple inversion
D. Alternate multilevel inversion

AMI is a popular ___________ encoding method.
A. Polar
B. Bi-polar ok
C. Uni-polar
D. Substitution

LF (Low Frequency) band is used in _____ propagation.
A. Sky
B. Ground Goolge
C. Single Mode
D. Line of Sight

Cable TV networks use_____________ cables.
Coaxial cables

In circuit switching, when two end devices “A” and “B” connects with
each other they send ___________ request.
A. Setup

B. Inquiry
C. Switching
D. Acceptance

In virtual Circuit network all packets follow ____________ path.
A. Dedicated
B. Individual
C. Alternative
D. Centralized

Among the following cables given below _____ cable has the cost as
compared to others
Medium

Among the following cables given below _____ cable has the lowest cast
as compared to others.
Coaxial cable

Among the following cables given below, ___________cable provides
highest bandwidth and less attenuation.
A. UTP
B. STP
C. Coaxial cable
D. Fiber optic cable ok

Header size _______while moving down the layers at sending side.
A. Increases

B. Decreases ok
C. Remain same
D. Headers and layers are unrelated

Set of rules to be followed for effective network communication is called
_____________.
Protocol
Topology
Switching
Encryption

Datagram (packet) travels across _____ in a network.
A. Hub
B. Modem
C. Routers
D. Switching

The bandwidth-delay product defines the number of bits that can fill
the_______________.
Link

In Pulse Code Modulation (PCM), the sampling is dependent on
_____________.
Time
Frequency
Amplitude
Signal Rate

Composite wave can be used to send ___________.
Frequency

_______________ is normally used for long-distance data transfer.
Both parallel and Serial data transmission

The conversion of __________ sample of the signal into __________
form is called quantizing process
A. Analog, Digital ok
B. Frequency, Amplitude
C. Amplitude, Frequency
D. Frequency, Bit Stream

When data is sent or received using _________________, the data bits
are organized in a specific order, since they can only be sent or received
one after another.
A. Parallel data transmission
B. Hybrid data transmission
C. Serial data transmission
D. Both parallel and serial transmission

Multipoint channel can be shared in ______ manner.
A. Spatial
B. Temporal
C. A lot of ways
D. Both temporal and spartial. ok

Communication between two users in a Cellular (Mobile) network is an
example of __________ communication.
A. Simplex
B. Complex
C. Half duplex
D. Full duplex ok

________ is normally used where speed is priority in data transfer.
Hybrid transmission

Wiring used for transmission modes depends upon __________.
A. Latency ok
B. Data Stream
C. Data Sniffing
D. Packet Tracing

If a digital signal has “L” number of levels, _______________ is the
number of bits required to represent each level.
Log base 2L

In scrambling coding scheme, the number of pulses replacing the bits
will be __________
Equal to pulses

______________ is a type of serial transmission in which data bits are
transmitted as a continuous stream in time with a master clock. start bits,
stop bits, and gaps are not used. Transmitter and receiver time is sync.
A. Isochronous

B. Synchronous Google ok
C. Asynchronous
D. Metasochronous

TCP/IP was presented by___________ in a research paper.
A. Vin Cerf and bob Kahn ok
B. Vint Cerf and David Lazer
C. Bob Kahn and Kathleen Carley
D. Duncan Watts and Peter Bearman

HDB3 falls under which coding scheme?
Bipolar

A frequency is called ------, if the rate of change in sine wave is
instantaneous.
A. Bandwidth
B. Zero frequency
C. Frequency hertz
D. Infinite frequency

The bipolar encoding scheme was developed as an alternative of
__________.
NRZ

In ____________ TCP/IP was declared as the official protocol of
internet.
1983
1980

1973
1988

If 32 bits are sent in two seconds then bitrate for that signal is
________________.
A. 8 Hz
B. 16 bps
C. 32 bps
D. 64bps

In _______________ data moves faster and timing errors are less
frequent because the transmitter and receiver time is synced.
Synchronous

Some manufacturers provide a special port called the __________ port
that allows a wireless keyboard to communicate with a PC.
A. USB
B. IRDA
C. Parallel
D. Consol

There are ____________ components of data communication system.
5

Which one of following is a scrambling coding technique?
A. BZ8S
B. B8ZS Google
C. B8SZ

D. BOSZ

In NRZ-I the signal is inverted if _________ is encountered.
A. 0
B. 1 ok
C. 00
D. 11

_________ layer is responsible for creating datagrams.
Network

_______________ is the Nyquist bit rate formula for noiseless channel.
BitRate =2*Bandwidth* L
BitRate =2*Bandwidth*log2
BitRate =3*Bandwidth*log2 L
BitRate=2*Bandwidth*log2 L

Signals travel through fiber optic cable are in the form of ___________.
A. Bits
B. Bytes
C. Light ok
D. Electromagnetic wave

When data is sent using __________________ , multiple data bits are
transmitted over multiple channels at the same time.
A. Serial data transmission
B. Hybrid data transmission
C. Parallel data transmission

D. Both parallel and serial transmission

In Binary ASK, the peak amplitude of one signal level is 0 and the other
is the same as the _______________ of the carrier.
A. Phase
B. Amplitude ok
C. Frequency
D. Modulation

_______________category of coaxial cable is used for thin Ethernet.
A. RG-11
B. RG-58 ok
C. RG-47
D. RG-59

Time taken by a periodic signal to complete one cycle is called ____.
Period

QAM stands for _________________________ .
A. Quarter Altitude Modulator
B. Quadrature Amplitude Modifier
C. Quadrature Amplifier Modulation
D. Quadrature Amplitude Modulation ok

According to Nyquist theorem, the sampling rate must be at least
________ times the highest frequency contained in the signal.
A. 2 Google
B. 4

C. 6
D. 8

_______ is an example of transmitter.
A. Hub
B. Server
C. Modem ok
D. Workstation

_____ is composed of thousands of interconnected networks expanded
over large geographical area.
A. The Internet
B. Home Network
C. Local area network WAN
D. Metropolitan Area Network

In frequency domain plot, which value is plot on Y-axis?
Time
Amplitude
Frequency
Wavelength

______ signal completes a certain pattern in a specific amount of time.
Periodic

The baud rate is _______________ to the bit rate.
Measure

The material used for conduction in twisted pair cable is ______.
A. Gold
B. Silver
C. Copper
D. Aluminum

In ___________ topology, each computer/station is attached to other
through a central device.
Star topology

In frequency modulation, the frequency of the oscillator changes
according to the ________.
Input Voltage

__________ is the heart of block coding.
A. Division
B. Coding ok
C. Substitution
D. Multiplication

In transmission impairments ______________noise occurs from other
sources like motors and appliances etc.
Impulse
Thermal
Induced
Cross talk

Demultiplexer is a_________ device.
One to many

Low pass channel with ___________ bandwidth is not real and is used
for theoretical modeling
Narrow

____________ is NOT an example of connecting device.
TCP

Parabolic antenna is used for_________ communication.
Microwave

Token Ring was devised by _________.
A. OSI
B. IBM Google ok
C. DELL
D. NASA

Induced noise Cable TV networks use____________ cables.
Coaxial

Electromagnetic waves ranging in frequencies between 3 kHz and 1 GHz
are called_____________.
A. Light wave
B. Radio waves Google

C. Microwaves
D. Infrared waves

Most commonly used connector for twisted pair cable is ________.
A. RJ-11
B. RJ-45
C. RJ-44
D. RJ-52

Binary Amplitude Shift Keying is also called as:
On-Off Keying

__________ is a multiplexing technique which shifts each signal to a
different carrier frequency.
FDM
in NRZ-1 the signal is inverted if ————- is encountered.
1

—————- Protocol suite is being used by the modern internet
communication.
TCP/IP

In ____________signal changes its shape or form.
A. Distortion ok
B. Attenuation
C. Thermal noise
D. impulse Noise

At the Application layer, object/information is in the form of
_______________.
A. Frame
B. Packet
C. Segment ok
D. Mesange

the first step in PCM technique.
A. Encoding
B. Sampling
C. Quantizing
D. Substitution

A frequency is called ____ if sine wave does not change with time
Zero frequency

Open system interconnection (OSI) has __ number of layers
7

N= S*r is the formula for finding
Baud rate

In context of bandwidth-delay product, the cross section of the pipe
represents the ______________.
A. Delay
B. Frequency

C. Throughput
D. Bandwidth ok

OSI stands for ___________.
Open System Interface
Open Source Interconnection
Open system interconnection
Open Standard Interconnection

Writing used for transmission modes depends upon ______.
Data stream

Minimum bandwidth required for Manchester line coding scheme
is____________.
A. 1Mhz Google ok
B. 2Mhz
C. 1Ghz
D. 3Ghz

Packets travel in ____ layer of TCP/IP protocol suit
Network

________ protocol suit is being used by the modern internet
communication
TCP/IP

Frames travel in _________ layer of TCP/IP Protocol suite.

A. Network
B. Data link
C. Application
D. Presentation

There are _______ common scrambling techniques.
A. Two ok
B. Four
C. Five
D. Eight

FSK stands for ______________.
A. Fake Shift Keying
B. Foreign shift keying
C. Frequency Swift king
D. Frequency shift keying ok

Switch is a _____ layer device.
A. Network
B. Transport
C. Data link ok
D. Application

In PCM technique Quantization is an ______ process
Un-balanced

The layer of TCP/IP protocol suite which is on the top is known as
________ layer.

Application

Manchester encoding scheme uses and inversion at the _____ of each bit
Middle

High-Level Data Link Control(HDLC) defines ____ types of frames to
deal with the transfer modes.
3

_________ are used to transport user data and control information
relating to user data
Information frams

__________ are used to exchange session management and control
information between connected devices.
U-frames

The ________ is the number of signal elements sent per unit time.
Bit rate

Error correction is more _______ than the error detection
Difficult

One of the most common protocols for point-to-point access is
_________.
PPP

Traditionally MANs have been implemented using one of the 2
technologies, Circuit Switching and Packet Switching
Ture
False

Which one is not the function of data link layer?
Line discipline

Is not a function of Data Link Control.
Modulation

The ________ protocol uses both flow and error control.
Stop-and-Wait

The ________ technique expands the bandwidth of a signal by replacing
each data bit with n bits using a spreading code.
A. FDM
B. TDM
C. DSSS ok
D. FHSS

Digital signals are refered to be ___________.
Discrete

The original Ethernet technology with the data rate of 10 Mbps is called
________?
Standard Ethernet

The extra bits added with the original data for error detection/correction
are called ________.
Redundant bits

In ________, each station sends a frame whenever it has a frame to send.
Slotted ALOHA

In TCP/IP protocol suite, the process of adding header at each layer on
sending side is known as ______
Packetizing

What is the period of a Sine wave having frequency of 5 Hz?
0.2

In Pure ALOHA, the vulnerable time is ________ the frame transmission
time.
Two times

Analog refers to something that is continuous in ___________.
Time

________ encoding is almost obsolete today
Unipolar

Which of the following is most affected by noise?
ASK

___________is sometimes called the bit rate.
A. pulse rate
B. Data rate
C. signal rate
D. modulation rate

________ contains a repeater.
Active hub

Asynchronous transmission is ___________.
Slow

In ASK, both ______ and ________ remain constant.
Frequency, Phase

DLC in Data Link Layer stands for ________.
Data Link Control

In ________, each station is allocated a time slot during which it can
send data.
TDMA

Asynchronous TDM is efficient only when the size of the time slot is
kept relatively ___________.
Large

Human voice is example of ___________ signal
Analog

The human voice normally contains frequency range from
______________.
A. 0 to 6000 Hz
B. 0 to 5000 Hz
C. 0 to 3000 Hz
D. 0 to 4000 Hz Google ok

According to the Fourier analysis, frequencies obtained after
decomposition of non periodic digital signals are _______.
A. Bit length ok
B. Automatic
C. Continuous
D. Heterogeneous

The addresses of transport layer are in the form of __________.
A. Name
B. Port numbers Google

C. Logical addresses
D. Link-layer addresses

_______ is the example of multipoint topology.
A. Bus Google ok
B. Star
C. Hub
D. Mesh

__________ component of data communication governs the overall
communication on the network.
A. Sender
B. Receiver
C. Protocol
D. Transmission Medium

In ____________ transmission mode, start and stop bits are used.
A. Sequential
B. Isochronous
C. Synchronous
D. Asynchronous Google

___________ is an Application layer protocol, that is used for accessing
the internet.
A. UDP
B. TCP
C. MAC
D. HTTP Google ok

Suppose a signal is attenuated then the value of decibel will be
__________________.
A. 0
B. 1
C. Negative New handout
D. Positive

__________ encoding scheme is somewhat a combination of the RZ and
NRZ-I schemes.
A. AMI
B. Manchester Google
C. Differential Manchester
D. Manchester and differential Manchester

The logical connection between the peer layers is ____________
connection.
A. Direct Google
B. Indirect
C. Physical
D. Tangible

To improve the performance of line coding ____________coding was
introduced.
A. 2BIQ
B. MLT-3
C. Block coding Google
D. Double coding

Block coding can help in ____________at the receiver side.
A. Distortion
B. Error detection New Handout
C. Synchronization
D. Synchronization and error detection

In TCP / IP model, the Physical Layer exchanges data in the form of
__________.
A. Bits Google
B. Frames
C. Packets
D. Segments

DC component issue is solved in ___________ coding scheme.
A. Line
B. Vector
C. Bipolar New handout ok
D. Biphase

___________ signals have limited number of discrete values.
A. Digital Google
B. Logical
C. Analogue
D. Continuous

In optical fiber a glass or plastic core is surrounded by a __________.
A. Insulator
B. Cladding Google ok
C. Inner Conductor shield
D. Outer conductor shield
Visit My YouTube Channel

For More Important Notes
Channel Name = #VuTopperRM

CS601 Quiz-2 by Vu Topper RMwwe

Uploaded by

Copyright:

Available Formats

CS601 Quiz-2 by Vu Topper RMwwe

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CS601 Quiz-2 by Vu Topper RMwwe

Uploaded by

Copyright:

Available Formats

CS-601 Data Communication

Update MCQS For Quiz-2 File

For More Help Contact What’s app 03224021365

______________ is a type of serial transmission in which timing of

___________ are known as identical objects in Network layer.

Reliability of network is measured by _______.

In __________ scheme, the bit is 0 if there is no change and the bit is 1

For More Help Contact What’s app 03224021365

The communication at the Application, Transport and Network layer is

In Manchester and differential Manchester encoding schemes, the signal

Which multiplexing technique shifts each signal to a different carrier

If 7 stations are to be connected in a Mesh topology, the number of full

For More Help Contact What’s app 03224021365

A digital signal is expressed through _______ values.

TCP/IP protocol suite has _____ layers.

A connecting device ____________________ in a network

Routing is the function of _____________ layer.

For More Help Contact What’s app 03224021365

___________ is the encoded message sent from one station to another

Multi-mode technology has ______________main types for light

Bandwidth in hertz is the range of ___________contained in a composite

For More Help Contact What’s app 03224021365

The fiber optic cable of type 7/125 is of _____ mode.

Coaxial cable carries signals of higher frequency ranges than those in

While implementing Binary ASK or On-Off Keying (OOK), the binary

For More Help Contact What’s app 03224021365

Both ----------- remain constant in Frequency Shift Keying.

____________ technique does not follows analog to analog conversion.

In statistical time division multiplexing, number of slots in frame are less

In the analog transmission of digital data,the baud rate is

PSK is ________ susceptible to noise as compared to ASK.

For More Help Contact What’s app 03224021365

Technique that allows the simultaneous transmission of multiple signals

Taking off the header from the message is called

For More Help Contact What’s app 03224021365

____________ is the range of frequencies contained in a composite

_______is the data format used at Transport layer of TCP/IP Protocol

In a complex network communication, we need a protocol at each layer,

Question No:1 (Marks:1) Vu-Topper RM

For More Help Contact What’s app 03224021365

Question No:2 (Marks:1) Vu-Topper RM

Question No:3 (Marks:1) Vu-Topper RM

Question No:4 (Marks:1) Vu-Topper RM

Question No:5 (Marks:1) Vu-Topper RM

For More Help Contact What’s app 03224021365

Question No:6 (Marks:1) Vu-Topper RM

Question No:7 (Marks:1) Vu-Topper RM

Question No:8 (Marks:1) Vu-Topper RM

Question No:9 (Marks:1) Vu-Topper RM

For More Help Contact What’s app 03224021365

Question No:10 (Marks:1) Vu-Topper RM

Question No:11 (Marks:1) Vu-Topper RM

Question No:12 (Marks:1) Vu-Topper RM

Question No:13 (Marks:1) Vu-Topper RM

For More Help Contact What’s app 03224021365

Question No:15 (Marks:1) Vu-Topper RM

Question No:16 (Marks:1) Vu-Topper RM

Question No:17 (Marks:1) Vu-Topper RM

Question No:18 (Marks:1) Vu-Topper RM