Cube™ Manufacturer's Guarantee

Cube™ is manufactured by Autex Industries Ltd and Autex Australia Pty Ltd under an ISO 9001 and
ISO 14001 certified Quality and Environmental Management Systems. The product is guaranteed to be free
from manufacturing defects and carries a Manufacturer’s Guarantee for a period of no less than ten years to
meet all of the performance properties stated within this guarantee.

Specification Product name CubeTM

Description 100% polyester lightweight semi-rigid panel

Metric

Panel dimensions 1220 mm x 2440 mm

Tolerance (+5 mm) (+10 mm)

Thickness 12 mm 24 mm

Tolerance (+/- 6%) (+/- 6%)

Physical description/ Boiling point: N/A

properties
Melting point: 250ºC

Vapour pressure: N/A

Specific gravity: Polyester 1.38

Flash point: N/A

Explosive limits: N/A

Solubility in water: Not soluble

Alkalinity: pH 7.8

Relative vapour density: N/A

Acoustic performance Cube is specifically designed to

reduce and control reverberated Frequency (Hz) 125 250 500 1000 2000 4000 NRC
noise and echo in
building interiors.
12 mm Cube 0.05 0.10 0.30 0.65 0.90 0.95 0.45
Minimum Noise Reduction
Coefficient 0.45
12 mm Cube 0.05 0.30 0.60 0.95 0.95 0.85 0.70
(with 25 mm air gap)

24 mm Cube 0.05 0.20 0.60 0.90 1.00 1.00 0.70

24 mm Cube 0.15 0.40 0.85 0.95 0.95 0.95 0.80

(with 25 mm air gap)
autexglobal.com

Service For further information about Cube or any other Autex Acoustics® product, please contact your account
manager or visit our website.
 Care and maintenance Maintain in accordance with the Care and Maintenance Guide available for this product.

Product specifications

Composition Wall applications Impact resistance Colour fastness to light

100% polyester fibre from Classification: B-s2,d2 ISO 7892:1988 Cube is suitable for indoor
polyethylene terephthalate (Cube 24 mm) use only. Light fastness
(PET). Cube contains a Tested using BS EN ISO 11925-2:2020 and BS EN Hard body impact is dependent on use and
13823:2020 and classified in accordance with BS
minimum of 60% previously EN 13501-1:2018, as required by BS EN
There is no surface damage exposure. Cube has been
recycled polyester fibre. 15102:2007 + A1:2011. or penetration to Cube when evaluated to the following
EUI-21-000135-G-A
subjected to hard body standard: ISO 105-B02:2014
Suitable applications Ceiling applications impacts. When adhered to Rating: 6 (Highest = 7)
Pinboards, partitions, Classification: B-s2,d2 10 mm plasterboard, the system
wallcovering with acoustic (Cube 24 mm) Colour fastness to rubbing
can resist a 9 joule impact.
properties. Accepts pins Tested using BS EN ISO 11925-2:2020 and BS EN
ISO 105-X12:2016
13823:2020 and classified in accordance with BS
and staples. EN 13501-1:2018, as required by BS EN
This is equivalent to the impact Dry rating: 4-5 (Highest = 5)
13964:2014. of a 0.5 kg object dropped Wet rating: 4-5 (Highest = 5)
Fire ratings EUI-21-000135-G-B
Cube has been evaluated using the following from a 2 m height. A small
test methods. indentation might be observed Pattern repeat
ASTM E-84-15a Non-woven. No pattern repeat
when subjected to an impact
ISO 9705: 1993 Class A, FS:0 - SD:45 but product has directional
equivalent to the impact of a
Classification: Group 1-S (Cube 1/2”) grain. Product may vary from
RJ4479-2 0.5 kg object dropped from a
Smoke production rate: 0.5 m height. samples and batch to batch
Class A, FS:0 - SD:65
<5.0m2/s due to fibre blending and lay-
(Cube 1”)
As required by NZBC C/VM2
RJ4479-1
Soft body impact up, which is an inherent feature
AS ISO 9705 - 2003 There is no surface damage of this product.
Classification: Group 1 Thermal performance or penetration to Cube when
Cube 12 mm R0.41 (@15°C) subjected to soft body impacts. Fabric care
(SMOGRArc): <100m2/s2
Assessed using methodology AS ISO 9705 - 2003 Cube 24 mm R0.82 (@15°C) When adhered to 10 mm Blot spills from fabric quickly.
in accordance with AS 5637.1:2015, as required
plasterboard, the system can Wipe with a damp cloth. Avoid
by BCA Specification C1.10-4 VOC emissions rubbing and excessive amounts
FI 4974 resist a 70 joule impact. This is
Autex Acoustics polyester of water as this will affect the
FAR 4055
equivalent to the impact of a 50
has been tested for chemical finish. Use carpet or upholstery
BS EN 13501-1:2018 kg object dropped from a
emissions in accordance with shampoo as directed.
Wall applications 150 mm height.
ASTM D5116 and is considered Blot with a clean dry cloth after
Classification: B-s2,d0 a low VOC product. Microbial resistance each application of solution.
(Cube 12 mm) VOC concentration: ASTM G21-15
Tested using BS EN ISO 11925-2:2020 and BS EN
13823:2020 and classified in accordance with BS
0.009 mg/m3 (7 days) Growth rating: 0 (No growth) Custom printed Cube requires
EN 13501-1:2018, as required by BS EN 15102:2007 Cube does not promote the the services of a specialist
+ A1:2011. Water vapour sorption growth of moulds and mildew. cleaning company. Refer to the
EUI-20-000268-A
ASTM C1104 / C1104M-13a Cube Care and Maintenance
Ceiling applications Test conditions: 49°C, 95%RH Guide for more information.
Classification: B-s2,d0 Water vapour absorbed and
(Cube 12 mm) adsorped after 4 days:
Tested using BS EN ISO 11925-2:2020 and BS EN
13823:2020 and classified in accordance with BS 0.4% by weight
EN 13501-1:2018, as required by BS EN 13964:2014
EUI-20-000268-B

Autex Industries Ltd Autex Australia Pty Ltd Autex Acoustics Ltd Autex Acoustics LLC
702-718 Rosebank Rd 166 Bamfield Road Unit J4, Lowfields Way, 1630 Dan Kipper Dr,
Private Bag 19988 PO Box 5099 Lowfields Business Park, Riverside, CA 92507
Avondale 1746, Auckland West Heidelberg, Melbourne Elland, West Yorkshire United States of America
New Zealand VIC 3081, Australia Hx5 9Da Phone +1 424 203 1813
autexglobal.com

Freephone 0800 428 839 Freephone 1800 678 160 United Kingdom
Phone +64 9 828 9179 Phone +61 3 9457 6700 Phone +44 0 1422418899
Fax +64 9 828 5810 Fax +61 3 9457 1020

An ISO 9001, ISO 14001 and ISO 45001 certified company. The brand names and logos mentioned herein are registered or unregistered trademarks either owned or used under license by Autex
Industries Limited or other members of the Autex Group. The contents of this document are protected by Copyright 2021 Autex Industries Ltd. All Rights Reserved. It is the user’s responsibility to
determine if the product and information presented in this document is suitable for the intended application by engaging a suitably qualified consultant. The information contained in this document
is correct to the best of our knowledge at the date of its publication. To verify that this document is the most current publication please check our website or contact your Autex account manager.

IA_CU - Cube Manufacturers Guarantee_Oct21_RC