Como Secure Access Series - HSA - High Risk Data Sheet
Como Secure Access Series - HSA - High Risk Data Sheet
Como Secure Access Series - HSA - High Risk Data Sheet
Product profile
Manufacturing origin: Como Building Products – designed and made In Australia
Project use: ceilings and walls
Available sizes (mm)
• HSA600: 600 x 600mm
• HSA450: 450 x 450mm
• HSA SPECIAL: custom sizes on request
Material
• Constructed from electro galvanised steel and MR MDF, with SS hinge,
hydraulic dampers and locking hardware
Finish
• Primed finish ready to accept paint
Door panel
• Constructed from 1.6mm steel outer skin & 0.6mm inner skin
• 32mm E1 MR MDF core (FSC™ on request)
• Steel door skins tack welded together
Frame
• Fabricated from 1.6mm electro galvanised steel to a profile of 85mm
• Flanged frame with anti-ligature corners
• Welded boxed lock strike to conceal lock tongue
• Frame junctions to be fully welded
Hinges
• A semi-recessed 6.35mm pin x 2.5 thick, full length stainless steel piano hinge
• Welded to frame and door
• Pin welded to prevent removal
Lock
• Door to be supplied fitted with a Lockwood 213 dead lock or equivalent
• Keyed alike with a construction cylinder, with escutcheon to outer face
• Steel lock cover to be fitted with anti-tamper screws to prevent tampering
Seals
• Provide perimeter door seals with rubber D-moulded seal
Safety
• Gas strut/s for controlled door descent
Options
• Reed switch provision – factory pre-drilled mounting hole locations to frame for wiring
loom and fixing screws
• HSAR model available with increased depth frame of 170mm
Access panel weight (EA)
HSA600: 600 x 600mm: 23kg
HSA450: 450 x 450mm: 18kg