AutoCAD

Certification
exam
preparation
Complete details
BY: JAIPRAKASH PANDEY | SOURCECAD

AutoCAD
Certification
exam guide
A complete guide about AutoCAD
certified user and professional
certification exams.

www.thesourcecad.com
About Me
Author of Bestseller AutoCAD book by
Packt Publication.

Certified Autodesk AutoCAD professional

with the latest certificate valid till 2024.

Member of Autodesk expert elite

community and Autodesk Insider program.

Nearly 10 years of experience in CAD and

training industry Jaiprakash Pandey | SourceCAD

www.thesourcecad.com
Topics
KEY TOPICS MENTIONED IN
THIS PRESENTATION

Why you should consider getting certified

How to book the exam and pre-requisies
Certification exam syllabus
Certification exam question types
ACU exam syllabus
ACP exam syllabus
Exam best practices

www.thesourcecad.com
 Get better career options
Why
Certification If you are a fresher certification will help you get new interviews
offers that will eventually convert into a better job.

MAKE YOUR PROFILE Better chances of getting noticed among peers

STAND OUT
If everyone is doing the same thing then how will you make
yourself stand out? Answer is certification.

Skills to handle complex tasks

A certifiied professional is better equipped to handle complex

tasks related to AutoCAD.

www.thesourcecad.com
Certified
Professional badge
A TINY BADGE MAKING ALL THE
DIFFERENCE

After adding this certified professional badge to your

CV or Linkedin profile you will immediately stand out
from the rest and will attract high-quality offers from
employers.

www.thesourcecad.com
 www.thesourcecad.com

Certification exam
options
TWO OPTIONS AVAILABLE

Online
Organised by Certiport in a controlled proctor-led exam
interface with access to only the exam interface.

Offline
At the testing center affiliated with Certiport. Locate the
nearest testing center here
https://www.certiport.com/locator

## There is no minimum eligibility criteria for the certification exam

Certified User Certified
exam professional exam

Recommended for basic level users Recommended for advanced users

Entry-level users with minimum of 150 hours of A minimum of 2 years or 400 hours of working
working experience recommended experience recommended

Basic topics from drawing, modification, annotation Basic as well as advance topics from AutoCAD as
and drawing management are part of the exam. included in exam objectives

www.thesourcecad.com
 Drawing hotspot Multiple choice
20% 20%

Question Types
MIXED VARIETY OF
QUESTIONS

AutoCAD software access is NOT

avaiable in the certification exam
Picture Hotspot Filling the blanks
and you need to answer questions 20% 20%
based on data files, images and
questions presented on exam
poratal.
Matching type
20%

www.thesourcecad.com
Key exam topics
The topics in the certification exam are
regular but in-depth knowledge is required to
answer these.

www.thesourcecad.com
Best Practices
SOME OF THE BEST PRACTICES YOU SHOULD
FOLLOW FOR THE EXAM

Avoid distraction Turn off Phone Answer all Questions Stable hardware

Study only topics To avoid any problems There is no negative Ensure you have a good
mentioned in the exam turn off your phone and marking so answer all microphone, webcam and
syllabus, don’t distract keep it away from your questions even those you internet connection.
yourself by trying to learn exam area. A proctor may don't know. Proctor will monitor you
as much as possible. You invalidate your exam if throughout the exam
can always learn the they find you near any duration with webcam.
remaining topics later. phone.
www.thesourcecad.com
 Draw and Modify Objects
1.1 Create basic drawing objects

Exam 1.1.a Create and edit geometric shapes

i. Lines, circles, rectangles, arcs, polygons, rays, etc.

Syllabus
1.1.b Create 2D isometric drawings
i. Switch between standard isometric planes (ISODRAFT)
ii. Use drawing and tracking tools that align with the corresponding isometric axes

1.2 Draw polylines

Detail Syllabus of Autodesk
1.2.a Draw open or closed polylines
certified user exam (ACU) i. Lines and arcs
1.2.b Edit a polyline
i. Join

1.3 Select and deselect objects

1.3.a Use a selection or crossing windows to select objects

1.3.b Remove objects from a selection set

1.4 Manage layers

1.4.a Set the current layer

1.4.b Create and/or remove layers
1.4.c Edit the properties of a layer
i. Name, color, linetype, and lineweight
# # Source: Autodesk exam objectives ii. Freeze, thaw, lock, unlock, on, and off
1.4.d Identify the objects on a specific layer www.thesourcecad.com
 1.5 Work with blocks

1.5.a Create a basic block

Exam
i. Define the base point
ii. Understand the significance of creating a block on layer 0
1.5.b Insert and modify instances of a block
i. Basepoint, Scale, Rotate, and Explode

Syllabus ii. Blocks palette, Tool palettes, and the Design Center
1.5.c Transfer information between drawing files
i. Copy with Basepoint
ii. Drag and drop across multiple open drawings
Detail Syllabus of Autodesk
certified user exam (ACU) 2. Draw with Accuracy
2.1 Apply basic object snaps

2.1.a Use object snaps and object snap tracking

i. Endpoint, midpoint, center, nearest, intersection, perpendicular, quadrant,
extension, parallel, geometric center, and tangent
ii. Midpoint between two points (M2P) combined with object snap tracking and
polar tracking

2.2 Identify and use coordinates

2.2.a Enter coordinate values on the Command Line

i. Relative, absolute, and polar coordinates
# # Source: Autodesk exam objectives 2.2.b Use dynamic input and direct distance entry

www.thesourcecad.com
 3. Basic Editing
3.1 Modify object properties

Exam 3.1.a Identify and alter layer assignments, color, lineweight, and linetype
i. Properties palette and Quick Properties

Syllabus 3.1.b Match the properties of one object to other objects

3.2 Use basic editing commands to modify objects

Detail Syllabus of Autodesk 3.2.a Move, copy, rotate, mirror, scale, and stretch objects
3.2.b Move, copy, and stretch objects using grips
certified user exam (ACU) 3.3 Trim, extend, or lengthen objects
3.4 Create rectangular and polar arrays
3.5 Offset objects at a specific distance

3.6 Apply a fillet or chamfer to objects

3.6.a Rounded corners

3.6.b Chamfered corners
3.6.c Square corners (zero radius)

4. Annotation
4.1 Create and modify text
4.1.a Create and modify text and multiline text
# # Source: Autodesk exam objectives 4.1.b Apply text and multiline text properties
i. Text height, justification, rotation, text wrapping, and text style
www.thesourcecad.com
 4.2 Add and modify leaders and/or multileaders
4.2.a Apply multileader styles
4.2.b Understand multileader options

Exam 4.3 Create and edit dimensions

Syllabus 4.3.a Add dimensions

i. Linear, aligned, angular, radius, diameter
4.3.b Create multiple dimensions with a single command
i. Continue and baseline dimensions
Detail Syllabus of Autodesk 4.3.c Modify and apply dimension styles
i. Precision, primary units, using overall scale, etc.
certified user exam (ACU)
4.4 Apply hatches or fill patterns

4.4.a Create a hatch or fill pattern

i. Pick points or select
4.4.b Specify hatch or fill options
i. Angle, scale, pattern, match properties, inherit, and color

5. Layouts and Printing

5.1 Work with layouts and viewports

5.1.a Activate a layout

5.1.b Modify viewports on a layout
# # Source: Autodesk exam objectives
5.1.c Set the viewport properties so the geometry plots to scale
5.1.d Add a title block to the layout
www.thesourcecad.com
 5.2 Manage output formats

5.2.a Publish a drawing to a plotter, printer, or PDF file

Exam i. Set printing and plotting options

ii. Use the Page Setup Manager to apply plot settings to a layout

Syllabus
Detail Syllabus of Autodesk
certified user exam (ACU)

# # Source: Autodesk exam objectives

www.thesourcecad.com
 1. Draw and organize objects

Exam 1.1. Create advanced drawing objects

Syllabus 1.1 a Create and edit polylines, arcs, polygons, and splines
1.1 b Work with regions
i. May include creating and editing boundaries; extracting design information;
and applying hatching
and shading to regions.
Detail Syllabus of Autodesk 1.1 c Create xlines, rays, and multilines
certified professional exam 1.1 d Create 2D isometric drawings
i. May include switching between standard isometric planes and using
(ACP) drawing and tracking tools to
be aligned along the corresponding isometric axes.

1.2. Select and organize objects

1.2 a Use Quick Select to select objects based on shared properties

1.2 b Select similar objects
1.2 c Isolate or hide objects in a drawing
1.2 d Control the draw order of overlapping objects
1.2 e Match the properties of one object to other objects
1.2 f Remove objects from a selection set

# # Source: Autodesk exam objectives

www.thesourcecad.com
 1.3. Manage layers

Exam 1.3 a Save, restore, and manage layer settings using layer states
3
1.3 b Use layer filters to control which layers are listed in the Layer Properties

Syllabus Manager
1.3 c Apply and remove layer overrides per viewport
1.3 d Remove layers from a drawing
i. May include deleting layers and reducing the number of layers in a drawing
Detail Syllabus of Autodesk by merging layers.
1.3 e Control the properties of referenced layers
certified professional exam
(ACP) 2. Draw with accuracy
2.1. Apply advanced object snaps

2.1 a Use object snaps

i. May include quadrant, apparent intersect, extension, parallel, geometric
center, and midpoint
between two points (M2P) combined with object snap tracking.
2.1 b Use polar tracking to restrict the cursor movement to specified angles

# # Source: Autodesk exam objectives

www.thesourcecad.com
 www.thesourcecad.com

2.2. Control the User Coordinate System (UCS)

Exam 2.2
2.2
2.2
a Understand and define the User Coordinate System
b Move the UCS origin
c Rotate the UCS

Syllabus 2.2
2.2
2.2
d Restore the UCS to the World Coordinate System (WCS)
e Restore the previous UCS
f Use named UCS definitions and preset orientations

Detail Syllabus of Autodesk 3. Advanced editing functions

certified professional exam
3.1. Control rotate and scale options
(ACP) 3.1 a Rotate objects around a specified base point
i. May include copying selected objects while rotating; entering a specific
rotation angle; dragging
the cursor; or specifying a reference angle to align to an absolute angle.
3.1 b Enlarge or reduce the size of objects
i. May include copying selected objects while scaling; using a scale factor and
a reference distance
and copy options; and reference points.

3.2. Apply array techniques

3.2 a Work with arrays

i. May include creating and editing rectangular, polar, and path arrays;
replacing items in an array;
# # Source: Autodesk exam objectives and understanding the use of associative and non-associative arrays.
 3.3. Control Trim and Extend options

3.3 a Use the advanced options of the Trim, Extend and Lengthen commands
i. May include the Edge and Project options; and selection methods such as
Crossing, Fence, and Shift-Select.

Exam ii. May include being able to differentiate the results of trimming or
extending objects with Trim
mode turned on or off.

Syllabus 3.4. Apply Offset options

3.4 a Use the advanced options of the Offset command

Detail Syllabus of Autodesk i. May include the Layer, Erase, Through, and Multiple options.
certified professional exam 3.5. Perform multi-functional grip editing
(ACP)
3.5 a Copy objects using grips
3.5 b Add, stretch, or remove vertices from an object
3.5 c Convert an object segment to an arc or line
3.5 d Lengthen an arc
3.5 e Use the multi-functional grips of selected objects

3.6. Apply Fillet and Chamfer options

3.6 a Create a fillet between two parallel objects

3.6 b Create a corner between two non-parallel objects using the SHIFT key
3.6 c Use the Multiple and Polyline options
3.6 d Understand the effects of Trim mode
i. May include being able to differentiate the results of performing the Fillet
# # Source: Autodesk exam objectives or Chamfer commands
with Trim mode turned on or off. www.thesourcecad.com
 4. Advanced layouts, printing, and alternative outputs
4.1. Create and manage layouts and viewports

Exam 4.1 a Use the Page Setup Manager

4.1 b Define and apply custom scales (scale list)

Syllabus 4.1 c Customize the size and shape of viewport boundaries

i. May include creating polygonal viewports; rotating viewports; clipping viewports;
and defining
viewport boundaries from objects.
Detail Syllabus of Autodesk 4.1 d Assign a named view to a viewport.

certified professional exam 4.2. Manage output formats

(ACP) 4.2 a Publish one or more drawings to a plotter, printer, or PDF file
i. May include setting plot options.
4.2 b Control how objects appear during output using plot styles
i. May include working with color-dependent and named plot style tables (CTB/STB
files).
4.2 c Create a zipped transmittal package (eTransmit)
4.2 d Save or export the objects in a drawing to a different file formats

5. Annotation techniques
5.1. Apply markup tools
5.1 a Create and modify revision clouds
5.1 b Use wipeouts to mask underlying objects in specific areas of a drawing
# # Source: Autodesk exam objectives 5.1 c Compare two drawings for differences
www.thesourcecad.com
 i. May include using the Drawing Compare tool, drawing compare Import, and
editing the current
drawing while in compare state.

Exam 5.2. Manage Hatch or Fill options

Syllabus
5.2 a Specify Hatch and Fill options
i. May include options such as annotative, associative, create separate hatches, draw
order, origin
transparency, island detection, gap tolerance, set origin, and inherit properties (use
current origin,
Detail Syllabus of Autodesk use source hatch).
certified professional exam 5.2 b Recreate the boundary around a selected Hatch or Fill pattern
i. May include associating the hatch object with the new boundary.
(ACP)
5.3. Format text and tables

5.3 a Apply text and multiline text properties

i. May include width factors, justification, and background masks.
5.3 b Create, modify, and apply text styles
5.3 c Create and adjust text columns
i. May include inserting column breaks.
5.3 d Insert tables and manipulate cell data
5.3 e Use fields in text and tables
5.3 f Insert symbols from the character map
5.3 g Check the spelling of text and dimension annotation
i. May include the use of Spellcheck and dictionaries.

# # Source: Autodesk exam objectives

www.thesourcecad.com
 5.4. Adjust multileaders

5.4 a Create and modify multileaders

Exam
i. May include editing and applying multileader styles; multileaders with custom
blocks; and
understanding multileader options.

Syllabus
5.4 b Add and remove leaders
5.4 c Align and collect leaders

5.5. Create and edit annotation with advanced dimensioning techniques

Detail Syllabus of Autodesk 5.5 a Create and modify dimension styles
certified professional exam i. May include editing and applying dimension styles.
5.5 b Create multiple dimensions with a single command
(ACP) i. May include continue and baseline dimensions.
5.5 c Set the dimension layer
5.5 d Associate or re-associate dimensions to objects
5.5 e Break and restore dimension and extension lines
5.5 f Adjust the spacing between dimensions

5.6. Apply annotative properties and styles

5.6 a Understand annotative properties and styles as they pertain to objects

i. May include objects such as text, dimensions, multileaders, and hatches.
5.6 b Define and apply annotative object styles
5.6 c Control the annotative scale of an object or viewport
5.6 d Add annotative scales to an object
# # Source: Autodesk exam objectives
www.thesourcecad.com
 6. Reusable content and drawing management
6.1. Create blocks and apply attributes

Exam 6.1 a Insert and modify blocks

i. May include ByBlock property settings, insertion units, blocks with attributes, and

Syllabus
using the
Enhanced Attribute Editor.
6.1 b Create and modify block definitions
i. May include creation techniques, redefining a block, using the Block Editor, and
defining attributes.
Detail Syllabus of Autodesk 6.1 c Modify attribute definitions with the Block Attribute Manager
i. May include attribute modes and attribute order.
certified professional exam
(ACP) 6.2. Control external reference and underlay files

6.2 a Attach external reference and underlay files

i. May include path types (no path, relative, full/absolute); reference types
(attachment versus
overlay); setting location (geographical location); and importing objects from a PDF
as linework.
6.2 b Clip and control the visibility of referenced and underlay files
i. May include blocks; external references; images and underlays; and controlling the
visibility of the
clipping boundary frame.
6.2 c Understand layer naming conventions when you bind a referenced drawing
i. May include using the bind and insert options.
6.2 d Adjust the settings of an underlay file or image
# # Source: Autodesk exam objectives i. May include fade, contrast, brightness, and monochrome.
www.thesourcecad.com
 6.2 e Create a hyperlink to another file
6.2 f Snap to objects in external reference and underlay files

Exam 6.3. Access and apply content resources

6.3 a Use the Blocks palette and Tool palettes

Syllabus 6.3 b Create and manage saved sets of objects using groups
6.3 c Transfer information between drawing files
i. May include using the Copy with Basepoint; or drag and drop across multiple open
drawings.
Detail Syllabus of Autodesk
6.4. Perform file maintenance with drawing utilities
certified professional exam
(ACP) i. May include drawing audit, recover, overkill, and purge.

# # Source: Autodesk exam objectives

www.thesourcecad.com
An investment in
knowledge always pays
the best interest.
Benjamin Franklin

Prepare for AutoCAD certification exam with video lessons, practice

tests and mock exam supported by a mentor on SourceCAD

Check the course

Questions?
I hope you learned something new, feel
free to share your questions on
[email protected]

www.thesourcecad.com