0% found this document useful (0 votes)
24 views1 page

Tata Consulting Engineer LTD: Current Transformer Tce Specification. Bidders Details SL. NO. Details Unit

Uploaded by

design
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
24 views1 page

Tata Consulting Engineer LTD: Current Transformer Tce Specification. Bidders Details SL. NO. Details Unit

Uploaded by

design
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Spec No.

TATA CONSULTING ENGINEER LTD Section: D


TCE.7701A-H-239-201

CURRENT TRANSFORMER

SL. TCE SPECIFICATION. BIDDERS DETAILS


DETAILS UNIT
NO.
DATA SHEET A1 DATA SHEET B
1.0 Name of Manufacturer and country By Bidder
2 Designation By Bidder
3 Type/Application Outdoor/ Metering
4 Quantity Refer layout/BOQ
IEC 61869, 60186 /BS 7625 &
5.0 Applicable standards
7626/IS 2705, 3156
6 Nominal system voltage and frequency kV, Hz 400kV, 50Hz
7 Highest system voltage kV 420kV
8.0 Rated lightning impulse withstand voltage kVp 1425
9.0 Rated switching impulse withstand voltage kVp 1050

10.0 Rated one minute power frequency withstand voltage of

10.1 Primary kVrms 630


10.2 Secondary kVrms 3
11 System neutral earthing Solidly earthed
12 Number of cores Refer SLD
Whether it is possible to adjust tap setting of any core
13 Yes/No Yes
independent of other cores ?
14 Rated short time withstand current and time kA/sec 63, 1
15 Dynamic rating kA 157.5
16 Rated extended primary current % 120% continuous
Temperature rise of windings at rated current and burden o 65 over ambient temperature of 40
17 C
over design ambient temperature deg.C (IEC 61869)
18 Class of insulation of windings A or better
19 Creepage distance of support insulator mm/kV 31
20 Total weight kg By Bidder
21 Total height mm By Bidder
22 CT details such ratio/class, etc. as per SLD Yes/No Yes to be provided by bidder
23 No. of cores & core details - As per SLD
24 Type test certificate enclosed Yes/No Yes
25 Technical/Description manual enclosed with Bid Yes/No Yes
26 Cantilever strength kg 500
27 Type of CT ( Live or dead tank) by bidder
28 Rated continuous current Amps As per SLD
29 No. of primary winding refer SLD
30 Output burden ( for all cores) refer SLD
31 Knee point voltage at different taps (for all cores) V refer SLD
Maximum exciting current at knee point voltage at different
32 mA refer SLD
ratios (for all cores)
33 Secondary winding resistance for all ratios and cores refer SLD
Instrumentation security factor at different ratios for metering
34 5
cores
35 Radio Interference voltage microV 1000
36 Corona excitation voltage kVrms 320
37 Partial discharge level pC not exceeding 10 pC
38 Standard to which oil confirms
Overall General arrangement drawing of CT is to be enclosed
39 Yes

40.0 Confirm whether in line with specifications Yes/ No Yes

PAGE 1 OF 1 Rev: R0

You might also like