Jha 1

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

DEPARTMENT & SECTION - Central Electrical Maintenance-MTST

SOP No. CELMECH ENTERPRISE PRIVATE


IMS/M/CEM/MTST/SOP-03 LIMITED
LOCATION OF JOB – BFPP
JOB HAZARD ANALYSIS
JOB DESCRIPTION – Earth Pit Construction, Maintenance & Testing
TEAM – CELMECH ENTERPRISE PRIVATE LIMITED
SEQUENCE OF BASIC JOB POTENTIAL HAZARD SAFEGUARD/CONTROLS TO BE PUT IN PLACE RESPONSIBILITY
STEPS
1. Before going to job ensure to have all tools &
tackles should be available in safe condition.
All materials required for Earth Pit making with
proper material challan.
3. Use barricading tape, green, red flag.
4. Conduct toolbox talk to educate the workers
regarding the job & Use proper PPE. If new
person joined the working group, then conduct
tool box talk again among them.
Job Preparation & Safety Contract Manpower
Specific hazards related to area of work 5. Identification of six directional hazards
Induction
around the working area by the help of concern
dept. and discuss with all working team and take
care of them. Arrange appropriate tools and
equipment to perform job.
6. Survey the digging area and check the
certification of the vehicle and tools which are
going to use in pit digging.
Do not use mobile phone during work.

1. Take proper relevant work permit (I.e.-


excavation permit) from concerned dept.
2. Take six direction clearance from Engineer/
1. Hazard at high voltage concerned authority. Supervisor/ Skilled
Work Permit 3. If any energy source is identified, to be
Other energy source in the vicinity Electrician/ Contract
mentioned in working clearance form. Manpower
Take confined space clearance (If work area is
confined).

1. Take proper power clearance from


concerned authority.
2. Check positive isolation as per ESI for Earth
pit testing of running equipment. Also put
personal box in positive isolation box. Engineer/
3. Take care of live surrounding cables and other Supervisor/ Skilled
Power Clearance
CELMECH ENTERPRISE PRIVATE LIMITED
JOB HAZARD ANALYSIS
Required PPE Required tools & equipment Required training Special skilled employees

1. Hand gloves 1. Tools Bag 1. SOP Training. yes


2. Safety shoes 2. Excavator 2. Emergency response plan.
3. Torch 3. Welding Machine 3. PPE.
4. Safety goggles 4. Earth Resistance Tester
5. Safety helmet 5. Hammer
6. Gas detector (if 6. Earth Spikes
required) Consumable Items:
7. Fluorescent vest 1. Electrode
8. Nose mask 2. Salt/ Bentonite powder
9. Ear Plug 4. Earthing Strip
10. Welding helmet
11. Welding leather hand
gloves
12. Cotton dress

You might also like