MY USG

Quick User Guide

 IMPORTANT！
Read and understand this manual before operating
the equipment. After reading, keep this manual in an
easily accessible place.
Ver: Myusg-V1.0

Operation taboo:

Danger ※ Do not modify this equipment, including equipment components, software, cables

and so on. User modifications may result in security problems or reduced system performance. All
modifications must be completed by the personnel approved by KONTED.
 Probe Components

1
7

8
5
6

2 9

10
3
11

1. Transducer head 7. Orientation Mark

2. Battery Indicator Lights 8. Wireless charging symbol
3. Wifi connecting status 9. Serial number
4. Power switch / freeze /Living button 10. Micro-USB port
5. Depth adjust button 11. Wireless charging pad
6. Gain ± button

1 Download MY USG App

Note:
Search and install “MY USG” iOS version 11.0 or newer
on your smartphones/tablets/laptops. Android version 8.0 or
Please contact us to get the windows software newer
Windows10 Laptop,5G,
64-bit or newer

2 Turn on/off USG probe

Press the power button to turn on the probe,

the indicator will show the battery icon.
and hold for 5 seconds to turn off the probe

-1-
 3 Connect USG probe

Method 1:Wi-Fi connection

Find SN of your USG probe Choose SSID “****BMH000” Enter password: uxccbmh000
Such as SN: UXCCBMH000

uxccbmh000

Note:
password is the SN of the
probe, but it is the small
letter not capital.

Method 2:USB connection Only available for customized Type-C port type probe

Connect the probe to your smart device by Type-C cable according to the picture below.

B
Note:
The A-end must be fully inserted into the probe and the B-end must be fully inserted into the
smart device.
-2-
 4 Scan now

Live
11 12 13 14 24 15 16 17

2 18
20
3 7 12
8
2
4 3

8
9

10

23 22 21 20 19

No Item Description
1 Serial number of probe 13 Preset selection
The Thermal Index (TI), Mechanical
2 Dynamic Range (DR) 14
Index (MI), and Hz values
DICOM Procedures, uploading images
3 Imaging Enhance (ENH) 15
to PACS
Mode: B⟺B/M, Color⟺PDI
4 16 Body Mark
Dual click to switch scanning mode
5 Freeze/Live button 17 APP version number
6 Mode:PW 18 Show patient information
7 Focus Position 19 Full screen
8 H: change scanning frequency(F) 20 B Gain （GN）
Biopsy Needle Guide line 21 Live/freeze display
9 To invert the image horizontally or vertically.
U/D flip, R/L flip 22 Mid-line
10 Depth Scale display Dual screen display mode
23 (only available for Apple ipad and android pad
11 8 TGC: adjust gains of different depth device)
Depth: adjust depth by swiping the 24 New patient & new report
12
button (D)
-3-
23 Dual screen display mode

Click button to switch the dual screen / single screen mode

Click the left/right screens to switch freely, and you can switch B/BM/Color/PW mode at the
same time

B+Color mode

B+B mode
23

Color+PW mode

24 New patient & new report

a. Enter new patient info, click OK

b. Scan now, then Freeze image

c. Edit the report, click to save the report to Data Table

24

-4-
Color/PDI Mode

1 GN Color Gain ±

Click Steer Adjust the deflection

2 Steer
angle of color ROI
5
Click PRF Adjust color pulse
3 PRF
repetition frequency
1
Click WF Adjusting the filtering
2
frequency of a pulse wave or
6 4 WF
3 continuous wave Doppler low
4 frequency signal
Tap and drag the green box to
5
move the Color ROI

Use the arrows provided to adjust

6
the angle and size
7

7 Invert Color Red⟺Blue invert

8 Slide the Color/PDI menu bar

8

PW Mode

9 GN PW Gain ±

Click Steer Adjust the deflection

10 Steer angle of sampling line of linear
array probe

Change the size of the sampling

11 Volume
volume
9
14
10 Used to change the spectrum
12 Angle
sampling line angle
11
Adjust color pulse repetition
12 13 PRF
frequency
13

14 Tap and drag the green line

15
15 Move the velocity scale
Baseline

16 Slide the PW menu bar

16

-5-
Freeze

add annotations on any frozen

1
image

Save image, review the image in

2
Date Table
1

3 Measurements

2
Save video, review the video in Date
4
Table 3

4
5 Date Table

Auto cine review 5

6

6
7 Manual cine review 7

Image Browser
8
Review image/video/report

①Click 5 Date Table

Watch ②Click 8 check record

③Please swipe to the left to browse

9 the images/videos and report.

Sharing scanned files by other app

Share
Printing image/report

Delete local files

Delete
The data table can store 500 files

-6-
5 Settings

Adjust cine loop frame number

1.Cine loop 100-200-500-1000
(100=10s)

Hide the patient information and

2.Show
parameter information on the
information
screen
1

3 Measuring magnify function can

4 3.Measure help you measure the boundary of
Magnify smaller target.
5

When scanning image

transmission is delayed or stuck,
4.WiFi Please contact us firstly then
channel switch one channel, press
setting “select” ,restart the USG probe
and reconnect the WiFi with your
phone.

a.Connect mobile phone with

Workplace WiFi
b. Fill in the
DICOM1-DICOM2-Worklist
5.DICOM information and tap Ping buttons
setting to test run the set ups.
c. If success messages appear,
then the DICOM/PACS
connections are completed.

-7-
 5 Charging

Charging by USB cable

Charging by wireless charging pad:

The probe supports wireless charging.
1. Disconnect the probe from your mobile device.
2. Connect the Micro USB cable to the wireless charging pad.
3. Connect the USB end of the cable to the wall adapter.
4. Plug the wall adapter into a power outlet.
5. Place the probe onto the white wireless charging pad.

Power outlet

-8-
Copyright Ownership and Usage Limitation
· All copyrights and intellectual property rights of the contents created are owned by
KONTED.
· No individual or organization may copy, modify or translate any part of this manual without
the written consent of KONTED.
BEIJING KONTED MEDICAL TECHNOLOGY CO.,LTD

Email: [email protected] Web:www.konted.cn