UNIMOG

A CC E S S O R I E S

hellgeth.com
extraordinary
These KONI shock absorbers have been especially developed by KONI and Hellgeth
engineering. They are designed to deliver optimum road holding and comfort both
on road and offroad. Tested under extreme conditions, these dampers for UNIMOG
vehicles matches the highest offroad demands regarding safety und stability.

UNIMOG SHOCK ABSORBERS KONI shock absorbers are simply adjustable referred to the rebound rates. This means
that the damping characteristic can be adapted to axles load and the circumstances.
SATISFY THE HIGHEST OFFROAD DEMANDS Furthermore, the shock absorbers have large reserves of damping power available.

UNIMOG
A CC E S S O R I E S

With more than 1000 customers worldwide Hellgeth engineering is the NO. 1 Hellgeth engineering
for all kind of modifications according the famous UNIMOG chassis. No matter Spezialfahrzeugbau GmbH
if you just need a set of customs coil springs for your expedition camper, a high
powered engine for your Dakar-Rally UNIMOG, or a complete brand new UNIMOG Gewerbegebiet 16
with professional winch system and extra deep fording kit for powerline set up in D-07343 Wurzbach-Rodacherbrunn
remote areas. With more then twenty years experience, in-house engineering and Germany
in house CNC machining, we pushed the limits of feasability by far.
T: +49 36652 35510
We do stock a wide range on UNIMOG parts and components. Our parts are [email protected]
either original or parts designed and manufactured in house or designed in house
and made by high quality suppliers. Focus of our UNIMOG stock is nevertheless
upgrade parts and components. Winches, split gearboxes, special axle gear ratios, for UNIMOG 1300L, 1550L and U4000
tire inflation system, aluminium rims, special tires, racing shocks are just a few of Art.-No. HE 00888
hundreds of solutions.
for UNIMOG 1700L to 2450L and U5000
Additionally to our UNIMOG programm we offer other wheeled special vehicles also for U400 und U500
for off-road and commercial use as well as customizing these. Art.-No. HE 00889
 Hellgeth Competition shocks are build from
massive Aluminum, with a 22 mm piston
rod. The external black anodized aluminum
reservoir with High speed and Low Speed
Compression valve is easy to fit according
the “Stahlflex” hose with adjustable rotating
fittings.

Hellgeth Competition shock is fully adjus-

table in compression and rebound forces.
These shock absorbers can withstand the
most extreme conditions in long distance
rally raid sport.

Together with our coil springs we can offer

the ideal racing suspension systems for
your UNIMOG, The External Water Cooling
System is an option and minimizes the fluid
temperatures inside the shocks to ensure
outstanding performance on the long run,
even when covered with mud or dirt.
COMPETITION SHOCKS

for UNIMOG models 435, 437

Art.-No. HE 00890
UNIMOG 1300L COIL SPRINGS
n especially calculated and manufactured for UNIMOG 1300L vehicles,
with an empty weight of 6500kg and e.g. high payload on the rear axle
n special spring rates for a stiff set up, against rolling while cornering
n powder coated in individual colors
n coil springs made by Hellgeth engineering

for UNIMOG 1300L model 435

Art.-No. HE 07001

CUSTOM MADE COIL SPRINGS

n individually calculated and manufactured
n exactly matching your vehicle weight and weight distribution
n individual spring rates from soft “crawling” set up to stiff “high speed” set up
n individual length and sag for either wheel travel extension or reduced rolling while cornering
n high quality 50CrV4 EN 10089 steel, crack-inspected, shot-peened, powder coated
n individual colors available

Custom made coil springs for all types

Art.-No. HE 07002
HUTCHINSON 2-PIECE ALUMINIUM RIM FOR UNIMOG
n saving unsprung weight
n extremely durable forged or cast design
n precisely machined, no unbalanced mass
n 2-piece bolt togheter design
n may be assembled and disassembled easily without heavy tools
n may remain on the hub for changing a tire
n designed for the use with a Beadlock ring
n enables lowest tires pressures without a risk of separation from the rim
n enhances traction on soft ground by far
n combined with CTIS a Beadlock is compulsary
n various offsets, rim sizes and Beadlock rings available
n succesfully tested under toughest rally conditions
n exclusive by Hellgeth engineering
n see facts on www.hutchinson-truckwheels.com

6 bolt rim 20x11 inch, for UNIMOG

406, 416, 427, 435, 437, U400
Tire size 365/80R20, 405/70R20
Art.-No. HE 07203

10 bolt rim 10x20 inch, for UNIMOG

437, U5000, U400, U500
Tire size 365/85R20, 395/85R20
Art.-No. HE 07206
 Give your UNIMOG more power
and save fuel at the same moment
Optimized performance for your UNIMOG engine
type 9xx, so OM 904 or OM924, OM906
Our proven chip tuning has been developed by our engineers to increase engine
power without compromising vehicle components.
The new set up on the engine control unit provides with the UNIMOG´s turbo
diesel engines a power increase of up to 15% and more, as well the torque curve is
optimized, too.

You‘ll immediately notice better acceleration from low end in the rev range and
when using taller gears.

Your engines response will be better – you‘re driving experience transformed. At the
same time, you may save fuel using more often low end revs.

CHIP TUNING

for UNIMOG Models U300, U400,

U500, U4000, U5000

SAVE FUEL AND POWER UP YOUR UNIMOG Art.-No. HE 07040

ADDITIONAL TANK
A bigger fuel reservoir in the UNIMOG vehicle is obligatory when you travel far
from any civilization. It expands your max. reach and enables to refuel at the ideal
moment to save costs.

The additional 270 liter fuel tank has been designed with great attention to detail
and is available for wheelbase 3250 mm and longer.

The tanks are made for maximum ground clearance and do not impede the off-ro-
ad-capabilities of the vehicle. Manufactured from stainless steel, it contains an inter-
nal system from meshed aluminium to reduce sloshing of the fuel to a minimum.

for UNIMOG models 435, 437

MORE RANGE:
Art.-No. HE 07060
DISCOVER THE WORLD
LIGHT UP YOUR ROUTE High power LED modules
The LED modules provide excellent lighting performance for your UNIMOG.

6 high-power LEDs for dipped beam and main beam functions on each side of the
vehicle plus a main beam module extra, for optimized homogeneous illumination
of the road.

The LED light kit is designed for your UNIMOG to be installed easily. There is no need
for a headlight power wash system LED modules require no maintenance up to
15,000 operating hours and they are absolutely waterproof

for UNIMOG models 427, 435, 437

Art.-No. HE 07020
FRONT BULLBAR
Bull Bars are the most effective way to protect your vehicle front end from brush
and small trees.

UNIMOG Bull Bars give your vehicle the real and tough expedition look. The design
does still accept a front winch installation and provides easy access for maintenance
reasons to the engine compartment by the fold down device.

We offer Bull Bars powder coated black or Stainless Steel.

They are prepared to mount two pairs of additional front lights.

for UNIMOG models 435, 437

powder coated black steel

Art.-No. HE 07050

Stainless Steel
Art.-No. HE 07051
PROTECT YOUR UNIMOG
 ACCENTUATION EXTRAVAGANT
ACCENTS
Driving through rough terrain does not have to require giving up on luxury.

No matter if you just install high-quality sports seats with leather upholstery or even
more extravagant accents that reflect the technical performance of the UNIMOG.

The exquisite overall impression may be enhanced by a leather sport steering wheel
and aluminum pedal system. The customization of the passenger cabin can be
characterized by exclusive and high-quality details unfolds, such as the door panels
made from carbon fiber.

ACCENTS
 INDIVIDUALIZATION CUSTOMIZE YOUR
UNIMOG
Further more, we do produce and offer accessories and components for your
individual needs and ideas to convert the UNIMOG into the perfect partner while
travelling off-road, or when used commercially.

Split gearboxes Cab protection bar

Winches Roll over Protection
Off road tires Roof rack

CUSTOMIZATION Skid Plates Inox steel exhaust

Central tire Components for
inflation system off road competitions
BEYOND THE EXTRAORDINARY
Hellgeth engineering Spezialfahrzeugbau GmbH
Gewerbegebiet 16 | D-07343 Wurzbach-Rodacherbrunn | Germany
T: +49 36652 35510 | [email protected] | www.hellgeth.com

Your Distributor