410 – 3800 MHz; 4x4 LTE (MIMO), 6.

2 dBi; 2x2 Wi-Fi (MIMO), 7 dBi; GPS/GLONASS, 21 dBi

410 - 470 MHz

617 – 960 MHz LTE: 6.2 dBi
Omni- Urban
1427 – 1517 MHz Wi-Fi: 7 dBi 410 – 470 MHz 4G LTE 5G

APPLICATION AREAS
Directional
1710 – 2700 MHz GPS: 21 dBi
3400 – 3800 MHz

Rural/Farm

2.4 – 2.5 GHz Chemical

CBRS Band 4x4 MIMO IP 69K GPS Included
5.0 – 7.2 GHz Protection
Marine

• 7-in-1 High performance multi frequency 2G/3G/4G/LTE/5G

antenna
• 4x4 MIMO LTE, 2x2 MIMO Wi-Fi & GPS / GLONASS Vehicle

• Ultra-wideband, includes 450 MHz and 3.5 GHz CBRS bands

• Robust and water-resistant antenna (IP69K)
• Ideal for transportation and marine use
• Multi mounting options for easy installation

The MIMO-3-17 is a 7-in-1 high performance multi frequency antenna within a single housing, providing four cellular, two Wi-Fi and a GPS/GLONASS
antenna. The four cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 617 MHz to 2700 MHz bands, as well as the new emerging LTE and
5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. The
ultra-wideband performance of the antenna allows it to be used across different operators and technologies and is ready for future cellular technologies
up to 3.8 GHz for 5G applications. The antenna also provides two separate dual-band Wi-Fi antennas, providing concurrent 2.4 GHz and 5 GHz on each
antenna with 2x2 MIMO capability. The seventh antenna is a high-performance active GPS/GLONASS system operating down to -40°C.

The MIMO-3-17 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation
patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired
elevation. This is an important criterion for the transportation and marine market. which the antenna was specifically designed for. Main applications
are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining futureproof over
the wide frequency band.

• Ultra-wideband from 410 to 470 MHz, 617 to 2700 MHz and

3400 to 3800 MHz bands • Transport broadband and Wi-Fi distribution, automation and
telemetry for buses, utility, trucks and public safety vehicles
• Cleverly designed decorrelated antennas give superior MIMO
performance in both Wi-Fi bands and cellular bands • Industrial factory automation, robotic machinery and other
M2M systems telemetry
• Includes high-performance GPS/GLONASS antenna
• Farming & agricultural automation such as M2M & IoT
• Careful mechanical design provides ruggedness, corrosion,
water and dust resistance (IP69K) • Broadband cellular to Wi-Fi distribution for marine / boats
(inland and near coastal vessels)
• Ground plane independent: MIMO-3 is designed with an
internal ground plane, making the antenna suitable for • Mining vehicles and machinery communications, telemetry
implementation on all surface types and automation (M2M & IoT)

MIMO-3-17
©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 1 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
The MIMO-3-17 is an Omni-directional antenna that works from | 410 - 470 MHz | 617 – 960 MHz | 1427 – 1517 MHz | 1710 – 2700 MHz | 3400 –
3800 MHz | and the following Wi-Fi frequency bands | 2400 – 2500 MHz | and | 5000 – 7200 MHz |

Product Order Code (SKU) A-MIMO-0003-V2-17 A-MIMO-0003-V2-17-B

Radome Colour White Black

Ports 1 - 4 – LTE, 5 & 6 - Wi-Fi 1 - 4 – LTE, 5 & 6 - Wi-Fi

7 - GPS 7 - GPS

SISO / MIMO 4x4 MIMO – LTE 4x4 MIMO – LTE

2x2 MIMO – Wi-Fi 2x2 MIMO – Wi-Fi

Coax Cable Type RTK-031 - LTE, Wi-Fi & GPS RTK-031 - LTE, Wi-Fi & GPS

Coax Cable Length 2m – LTE, Wi-Fi & GPS 2m – LTE, Wi-Fi & GPS

Connector Type SMA (M) - LTE, Wi-Fi & GPS SMA (M) - LTE, Wi-Fi & GPS

EAN 6009710920848 6009710922125

EU Homologation Number E1*10R06/01*9550*00 E1*10R06/01*9550*00

*The coax cable & connector are factory mounted to the antenna

MIMO-3-17
©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 2 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
 410 - 470 MHz A-MIMO-0003-V2-17 or
Frequency Bands: 617 – 960 MHz Antenna: A-MIMO-0003-V2-17-B
1427 – 1517 MHz
1710 – 2700 MHz Mounting Bracket: Threaded spigots (up to 60mm
3400 – 3800 MHz clamping thickness), adhesive
Gain (max): 1.5 dBi @ 410 – 470 MHz surface mounting & optional
2.2 dBi @ 617 – 960 MHz magnetic mount
4.2 dBi @ 1427 – 1517 MHz
6.2 dBi @ 1710 – 2700 MHz Adapters: RPSMA(M) to SMA (F)
4.8 dBi @ 3400 - 3800 MHz
VSWR: ≤2.5:1 across 90% of the bands

Product Dimensions: 253 mm x 128 mm x 144 mm

Feed Power Handling: 10 W

Packaged Dimensions: 265 mm x 211 mm x 204 mm

Input Impedance: 50 Ohm (nominal)

Weight: 1.51 kg
Polarisation: Linear Vertical
0.350 dB/m @ 400 MHz Packaged Weight: 1.61 kg
Coax Cable Loss: 0.560 dB/m @ 900 MHz
0.71 dB/m @ 1500 MHz
Radome Material: UV Stable ASA
0.785 dB/m @ 1800 MHz
1.20 dB/m @ 3000 MHz
Mounting Type: Spigot, Surface and Magnetic mount
DC short: Yes options

Frequency Range (GPS): 1575.42MHz/1600MHz

Gain (Max): 21+/-2dBi Wind Survival: ≤220 km/h

VSWR: ≤1.5:1 Temperature Range (Operating): -40°C to +80°C

DC Voltage: 2.7-3.3 V
Environmental Conditions: Outdoor/Indoor
DC Current: 5-15mA
Water Ingress Protection Ratio/Standard: IP69K
Noise Figure: ≤1.5 dB

Nominal Impedance: 50 Ω Salt Spray: MIL-STD 810G/ASTM B117

Polarisation: RHCP Operating Relative Humidity: Up to 98%

12dB Min f0+50MHz,
Filter Out Band Attenuation:
16dBi Min f0-50MHz Storage Humidity: 5% to 95% - non-condensing
Voltage: 2.7 - 3.3V
Storage Temperature: -40°C to +80°C
Max. Power: 50 W
Enclosure Flammability Rating: UL 94-HB
Coax Cable Loss: 0.71 dB/m @ 1500 MHz

Impact Resistance: IK 10

2400 - 2500 MHz Product Safety & Complies with CE and RoHS standards
Frequency:
5000 – 7200 MHz Environmental:
Gain (Max): 3 dBi @ 2400 - 2500 MHz
7 dBi @ 5000 - 7200 MHz

VSWR: ≤ 2.5:1 over 95% of the band

Feed Power Handling: 10 W

Nominal Input Impedance: 50 Ohm (nominal)

0.91 dB/m @ 2400 MHz
Coax Cable Loss:
1.65 dB/m @ 5800 MHz
Path to Ground: Yes

©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 3 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
 VSWR is a measure of how efficiently radio-frequency power is 6.2 dBi is the peak gain across all bands from 410 – 3800 MHz
transmitted from a power source, through a transmission line, into a
load. In an ideal system, 100% of the energy is transmitted which
Gain @ 410 - 470 MHz: 1.5 dBi
corresponds to a VSWR of 1:1.
Gain @ 617 – 960 MHz: 2.2 dBi
The MIMO-3-17 delivers superior performance across all bands with a
Gain @ 1427 – 1517 MHz: 4.2 dBi
VSWR of ≤2.5:1 across 90% of the band.
Gain @ 1710 – 2700 MHz: 6.2 dBi
Gain @ 3400 – 3800 MHz: 4.8 dBi

*VSWR measured with a 2m low loss cable, 650 x 650 mm ground plane and +Antenna gain measured with a 650 x 650 mm ground plane and
unused ports terminated with 50Ω load.
polarisation aligned standard antenna

VSWR is a measure of how efficiently radio-frequency power is 7 dBi is the peak gain across all bands from 2400 – 2500 MHz and
transmitted from a power source, through a transmission line, into a 5000 – 7200 MHz
load. In an ideal system, 100% of the energy is transmitted which
Gain @ 2400 - 2500 MHz: 3 dBi
corresponds to a VSWR of 1:1.
Gain @ 5000 – 7200 MHz: 7 dBi
The MIMO-3-17 delivers superior performance across all bands with a
VSWR of ≤2.5:1 across 90% of the band.

+Antenna gain measured with a 650 x 650 mm ground plane and

*VSWR measured with a 2m low loss cable, 650 x 650 mm ground plane and polarisation aligned standard antenna
unused ports terminated with 50Ω load.

©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 4 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 5 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 6 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 7 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
 Standard Spigot Mount

Threaded Spigot Mounting

Surface Mount

Adhesive Surface Mounting

Magnetic Mount

Optional Magnetic Base Kit

©2022 Poynting Antennas (Pty) Ltd. All rights reserved Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Product Specifications may change without prior notice 8 Document version: TS-A-MIMO-0003-V2-17 REV 12
Revised: June 2022 www.poynting.tech
 A-MBK-0001-V1.0

Magnetic Base Kit

A-CAB-118

5 x 5m Extension cables for 5-in-1 Antennas

A-CAB-119

5 x 3m Extension cables for 5-in-1 Antennas

Unit 4, N1 Industrial Park, Regus Business Center Neue Messe Riem 1804 Owen Court, Suite 104,
Landmarks Avenue, Kronstadter Straße 4 Mansfield,
Samrand, 0157, South Africa 81677 München TX 76063
Phone: +27 (0) 12 657 0050 Germany USA
E-mail: [email protected] Phone: +49 89 7453 9002 Phone: +1 817 533-8130
International Email [email protected] E-mail: [email protected] E-mail: [email protected]