The document provides information about electric heaters, including fan heaters. It describes different models of fan heaters, their specifications and applications. Fan heaters can be used for both heating and ventilation and are suitable for various environments like industrial premises and ships.
The document provides information about electric heaters, including fan heaters. It describes different models of fan heaters, their specifications and applications. Fan heaters can be used for both heating and ventilation and are suitable for various environments like industrial premises and ships.
The document provides information about electric heaters, including fan heaters. It describes different models of fan heaters, their specifications and applications. Fan heaters can be used for both heating and ventilation and are suitable for various environments like industrial premises and ships.
The document provides information about electric heaters, including fan heaters. It describes different models of fan heaters, their specifications and applications. Fan heaters can be used for both heating and ventilation and are suitable for various environments like industrial premises and ships.
Fan Heaters, worth knowing................................................................................1
Electric Heater – Elektra - V..................................................................................2 Technical specifications – Fan heater Elektra......................................................3 Electric Heater – EVn.............................................................................................4
PC_05 sec 01 – 2016-12-15 Right to alterations reserved ii
FAN HEATERS, WORTH KNOWING
PORTABLE AND STATIONARY HEATERS IMPORTANCE OF CORRECT DISTRIBUTION OF
Air heating by means of fan heaters is a quick way of APPLIANCES heating all types of premises such as sports halls, indus- When installing fan heaters, it is important to distribute trial premises, storage premises, etc. where quick heating the appliances correctly. The greatest possible care must is required. Fan heaters are also well suited for heating be taken to distribute the estimated heat output over as premises with high fi re risk and agricultural storerooms. many appliances as possible. The reason for this is the Portable fan heaters are particu-larly well suited for dry- desirability of evenness of temperature through-out the ing out buildings on building sites. whole room, and as the temperature is highest near the air heaters, these must be spread out over the room. A Air heating takes place through the air being forced past number of fan heaters can be controlled from a common electrical heating elements by a fan and propelled into thermostat or control unit in the room. the room. In systems where fan heaters are only used for room heating and not for ventilation, the air circu-lates FAN HEATERS AS A COMBINED HEATING AND through the fan heaters repeatedly until the desired tem- VENTILATION SYSTEM perature has been achieved. A thermostat or a control Stationary fan heaters can be fi tted with a mixing unit for unit in the room will switch the heating elements on and intake of outdoor air or mixing outdoor and indoor air. off in accordance with the required room air temperature. This is a simple way of supplying the room with heated outdoor air. The mixing unit is also available with simple, If fan heaters are also used to ventilate a room, the ele- inexpensive automatic control which opens and closes ctrical power required to heat a given quantity of air per the air damper via a clock in con-junction with the requi- time unit must be calculated and the size and number of red indoor temperature. fan heaters chosen on the basis of this calculation. When using air as a heat carrier, the thermal effect of rising hot REGULATION EQUIPMENT air must be taken into consideration. Fan heaters are th- In order for a hot-air system to function as intended in a erefore best suited for use in relatively low-height rooms quick and inexpensive way it is important to use the right (below approx. 5 meters). If the ceiling height is more regulating equip-ment. than approx. 5 meters, and it is not possible nor desirable to use ceiling-mounted fan heaters or radiant heating systems, air mixers should be installed to force down the hot air which accumulates below the ceiling.
AN INEXPENSIVE SOLUTION Heating by means of fan heaters as an extre-mely inexpensive investment if the invested sum per instal- led kilowatt is calculated. The reason for this is that fan heaters often provide more power per appliance than, for example, radiant heating. Cabling is simpler as the appliances are mounted on a wall or are portable with connecting cables.
PC_05 sec 01 – 2016-12-15 Right to alterations reserved 1
ELECTRIC HEATER – ELEKTRA - V
A FAN HEATER FOR DEMANDING ENVIRONMENTS
Elektra is a serie of fan heaters for demanding environments. The compact Elektra is manufactured from stainless steel and is primarily intended for fixed installation. The brackets can be angled for portable use if required.
Elektra V is for use on ships and within the offshore industry, withstands vibrations and humidity. Approved by Det Norske Veritas.
• For fixed installation or portable use.
• Casing: stainless steel, Elektra C acid resistant. Grille and bracket: RAL 3020 (red). • Output: 3, 6 kW. • Elektra V has reinforced electrical insulation, motor and heating elements have a construction that absorbs vibrati- ons. Available also for 440V/60Hz. • Available in four versions for different demanding environments.
PC_05 sec 01 – 2016-12-15 Right to alterations reserved 2
TECHNICAL SPECIFICATIONS – FAN HEATER ELEKTRA
Output steps Airflow Voltage Amperage HxWxD Weight
Approved by SEMKO and CE compliant. Elektra V is approved by Det Norske Veritas.
DIMENSIONS
ELC331, ELF331, ELF633, ELV
375
300 340
MOUNTING ACCESSORIES Elektra is primarily intended for wall mounting, but the Type Description brackets can be angled for portable use. ELSRT Control panel and thermostat, for ELC/ELV, start/stop The heat output is controlled by the built in thermostat (+5 – +35°C). Elektra H has a thermostat with setting range 0 – 70°C. ELS Control panel, for ELF, start/stop ELRT Thermostat, for ELH The on/off mode, and half or full heat output can be controlled with the output selector on the unit or with an external control panel mounted on to the wall for easy access.
PC_05 sec 01 – 2016-12-15 Right to alterations reserved 3
ELECTRIC HEATER – EVN
Thermo Navare EVN
ThermoNavare is a range of fan heaters approved by Det Norske Veritas for fixed installation in ships and mobile platforms, thought not on deck or in Ex-classified holds. The units have a built-in thermostat and operating switch. EVN is supplied with a robust wall bracket.
APPROVAL/AREA OF USE The heaters are approved by Det Norske Vertias, certificate No. E-4834 for use on board ships and offshore units, tightness IP44.
Regulation Weight El. nr. Type Power Volt/fase Airflow m3/h A ∆t m/s kW kg
PC_05 sec 01 – 2016-12-15 Right to alterations reserved 4
ELECTRIC HEATER – EVN
PLACEMENT AND LOCATION
The EVN heater must be attached to the enclosed wall bracket with at least 4 pcs. M6 bolts for the bracket. All 6 screws to the cabinet must be used. Safety distance shown on sketch. must be followed.
396
8 4 495
Min 200 10 Product: El. heater IP 44 Type: EVN 9 - 44 El data: 9kW 440/3 60Hz Air data: 1300 m3/h Max outlet 40ºC Producer: Thermo Byggvarme AS
WARNING:
9 Do not cover Free space in front min, 0,5 m keep the inlet and outlet grid clean Reset safety switch: Disconnect el. supply. Remove cover. 160
160
Press the button.
355
390
380 7
6 5 3 Min 1 2 200 247 248 Min. 500 Cable glands for service Top view Side view Front view
(Service side, without cover)
1. Cabinet 6. Thermstat – Prodigy
2. Wall bracket 7. Regulation switch 3. Heating element 8. Safety switch 4. Fan with motor 9. Transformer 5. Contractor 10. Name plate EVN
ELECTRICAL INSTALLATION Electrical installations must be carried out by an authorised electrical contractor. Support cable and any extra cable for external thermostat and remote control switch may be of standard marine type. Make sure that the screws in terminal are properly tightened on both sides. Check for correct function of the fan and the two groups. Operate the regulation switch and the thermostat.
The cover must be properly secured.
MAINTENANCE Regular maintenance is normally not necessary. Thick layers of dust on the surface of the heater constitute a fire hazard. Check the inlet and outlet grids for dirt, and clean with pressure air.
REPAIRS Repair s must only be carried out by an authorised electrical contractor. When ordering spare parts, it is important to specify the correct type of heater, output and voltage, as well as the production date and description of the spare part.
SPARE PARTS You will find this described in the wiring diagram inside the cover.
PC_05 sec 01 – 2016-12-15 Right to alterations reserved 5
