ARI-PREMIO

Electric thrust actuator

Electric thrust actuator ARI-PREMIO

ARI-PREMIO
Electric thrust actuator 2,2 - 5 kN

Page 2

ARI-PREMIO
Electric thrust actuator 12 - 15 kN

Page 4

Features:
• 2 torque switches
• 1 travel switch
• Handwheel
• Operative ambient temperature -20°C to +70°C
• Enclosure IP 65
• Additional devices available;
e.g. potentiometer
• Travel indicator

Edition 09/05 - Data subject to alteration Data sheet 0000001

Electric thrust actuator ARI-PREMIO 2,2 - 5 kN

Pos. Description Pos. Description

50.1 Gearbox 50.38 Guide spindle
50.2 Cable conduit fitting 2 x M16x1,5 50.40 Synchronous motor, complete
50.4 Sealing plug 1 x M16x1,5 50.40.3 Capacitor
50.6 Hood 50.42 Board support
50.7 Hood seal 50.43 Standard board
50.8 Counter-sunk screw DIN EN ISO 10642 - M5 x 20 50.43.1 Travel switch (valve - open) S3
50.9 Sealing washer DIN EN ISO 7089 - 5,3 50.43.2 Torque switch
50.10 Column 50.45 Shift lever
50.12 Handwheel 50.47 Circuit diagram sticker, standard
50.14 Yoke 50.48 Connector, 3-pole (standard)
50.19 T-head bolt DIN 261 - M12 x 40 50.50 Trip slide
50.23 Lift dial 50.51 Setting spindle for switch S3
50.27 Coupling 50.52 Setting spindle for switch S4
50.30 Driving spindle 50.53 Setting spindle for switch S5
50.31 Spindle safety feature 50.54 Trip cam
50.32 Torsion safety feature 50.56 Spring for trip slide
50.34 Bellow 50.58 Protective conductor terminal
50.36 Bushing 50.87 Threaded bush
50.37 Grub screw DIN 913 - M3 x 5

2 Edition 01/05 - Data subject to alteration

 Accessories

Edition 04/03 - Data subject to alteration

output 1
(K1)
output 2
(K2)

power
supply interface
binary input 2/
output 5

external actual
set point input value input
option

Wire connections of the different valve types

HZ Heating resistor
3-way valve 3-way valve
Straightway valve with mixing plug with diverting plug DE Torque switch
Travel switch for limiting the travel distance
WE (S3)
closed A-AB open AB-B open in opening direction
open B-AB open AB-A open RI 21 Electronic position indicator
ES 11 Electronic position controller
NA Low-voltage connection board, zero potential
Option NA:
same design but no RC circuit PA Standard-voltage connection board, zero potential
and switches with gold contacts POT Potentiometer
(Switching capacity 0.1A, 4-30V)
WE Travel switch, zero potential
TTR Temperature-controller

3
Wiring diagram 2,2 - 5 kN
Electric thrust actuator ARI-PREMIO 12 - 15 kN

Pos. Description Pos. Description

50.1 Gearbox 50.38 Guide spindle
50.2 Cable conduit fitting 2 x M16 x 1,5 / 1 x M20 x 1,5 50.40 Synchronous motor, complete
50.6 Hood 50.40.3 Capacitor
50.7 Hood seal 50.42 Board support
50.8 Counter-sunk screw DIN EN ISO 10642 - M5 x 20 50.43 Standard board
50.9 Sealing washer DIN EN ISO 7089 - 5,3 50.43.1 Travel switch (valve - open) S3
50.10 Column 50.43.2 Torque switch
50.12 Handwheel (engageable) 50.45 Shift lever
50.24 Yoke 50.47 Circuit diagram sticker, standard
50.25 Hexagon nut DIN EN ISO 4032 - M12 50.51 Setting spindle for switch S3
50.26 2-ear clamp 50.52 Setting spindle for switch S4
50.27 Coupling 50.53 Setting spindle for switch S5
50.30 Driving spindle 50.54 Trip cam
50.31 Spindle safety feature 50.56 Spring for trip slide
50.32 Torsion safety feature 50.58 Protective conductor terminal
50.34 Bellow 50.87 Threaded bush
50.36 Set collar 50.101 Connector, 8-pole
50.37 Grub screw DIN 913 - M3x5

4 Edition 01/05 - Data subject to alteration

 Accessories

output 1
(K1)
output 2
(K2)

Edition 01/05 - Data subject to alteration

power interface
supply
binary input 2/
output 5

external actual
set point input value input

option
Option NA Wire connections of the different valve types
same design as Standard but no RC 3-way valve 3-way valve
circuit and switches with gold contacts Straightway valve with mixing plug with diverting plug
(Switching capacity 0.1A, 4-30V)

closed A-AB open AB-B open

open B-AB open AB-A open

HZ Heating resistor
DE Torque switch
Travel switch for limiting the travel distance
WE (S3)
in opening direction
For external reversing contactor connect at L1, L2, L3. RI 21 Electronic position indicator
L1, L2, L3 - actuator spindle drives in
L3, L2, L1 - actuator spindle drives out ES 11 Electronic position controller
In all external reversing circuits the torque POT Potentiometer
switches S1 and S2/S3 have to be used to
switch off the actuator motor. WE Travel switch, zero potential

reversing TTR Temperature-controller

contactor
Please check the operating direction
(extern) of the actuator ! WS Reversing contactor
PR Phase control relay
TS Temperature switch (motor)

5
Wiring diagram 12 - 15 kN
6
Accessories WS + PR

Wire connections of the different valve types

3-way valve 3-way valve
Straightway valve with mixing plug with diverting plug

closed A-AB open AB-B open

open B-AB open AB-A open

3-step input signal Connect 3 phases L1, L2, L3 only here

Accessories WS

HZ Heating resistor
DE Torque switch
Travel switch for limiting the travel distance
WE (S3)
in opening direction
RI 21 Electronic position indicator
ES 11 Electronic position controller
POT Potentiometer
WE Travel switch, zero potential
TTR Temperature-controller
3-step input signal Connect 3 phases L1, L2, L3 only here WS Reversing contactor
PR Phase control relay
Please check the operating direction of the actuator!
TS Temperature switch (motor)

Edition 01/05 - Data subject to alteration

Wiring diagram (accessories) 12 - 15 kN
 Additional options

Additional travel switch Potentiometer

50.42 Board support 50.42 Board support
50.50 Trip slide 50.50 Trip slide
50.52 Setting spindle for switch S4 50.67 Potentiometer
50.53 Setting spindle for switch S5 50.68 Connecting cable
50.61.2 Travel switch S4 50.69 Self-tapping screw
50.61.3 Travel switch S5 50.70 Pinch spring
50.62 Connector, 6-pole 50.71 Slide block
50.73 Pinion
50.74 Connector, 3-pole

Electronic position controller ES 11

Operating voltage UB 24V-50/60Hz 115V-50/60Hz 230V-50/60Hz
Operating current without load IB 150 mA 40 mA 20 mA
Input control signal YU 0 (2) .... 10V DC - (RI = 30 kOhm)
Input control signal YI 0 (4) .... 20 mA DC - (RI = 125 Ohm)
Resistance RP 0 .... 1000 Ohm
Three-step switching current IS 4A max.

Electronic position indicator RI 21

Operating voltage UB 24V-50/60Hz 115V-50/60Hz 230V-50/60Hz
Operating current without load IB 150 mA 40 mA 20 mA
Output control signal YU 0 (2) .... 10V DC - (load resistance > 1000 Ohm)

Output control signal YI 0 (4) .... 20 mA DC - (load resistance max. 800

Ohm)
Resistance RP 0 .... 1000 Ohm

Edition 04/02 - Data subject to alteration 7

 Technical data

Type ARI-PREMIO
Thrust force kN 2,2 5,0 12,0 15,0
Travel distance max. mm 50 80
Duty classification in accordance S1 - 100% ED; S3 - 50% ED
S1 - 100% ED; S3 - 80% ED 1200 c/h
with EN 60034-1/A11 1200 c/h
Control speed mm/sec. 0,25 0,38 0,38 1,0 0,79 0,38
Motor voltage 230V - 50Hz / 60Hz * 230V - 50Hz
Power consumption VA 10,3 11,7 25,3 52,9 109 96
2 pcs., fixed wiring, 2 pcs., fixed wiring,
Torque switch
switching capacity 10A, 250V∼ switching capacity 16A, 250V∼
1 pc., fixed wiring, 1 pc., fixed wiring,
Travel switch
switching capacity 10A, 250V∼ switching capacity 16A, 250V∼
Enclosure EN 60529 IP 65
Max. permissible ambient temperature -20 °C ... +70 °C
Handwheel Yes (always running) Yes (engageable)
Mounting position Horizontally to vertical above valve body (any position 90° from vertical).
Gear lubricant Klüber / Isoflex Topas NB152 Molyduval Valenzia H2
Weight kg 5,4 5,4 6,0 6,5 10,5
* Control speed and power consumption are 20% higher at frequency of 60 Hz.

Accessories
Type ARI-PREMIO
Thrust force kN 2,2 5,0 12,0 15,0
Additional travel switches 2 additional travel switches, zero potential, switching capacity 10A, 250V∼
Additional travel switches 2 additional travel switches, zero potential, with gold contacts, for low switching capacities and at
for Low-voltage / electronic system aggressive atmosphere, switching capacity max. 0,1A, 4-30V
Maximum 2 possible.
Potentiometer
Different resistance-values: 100 Ohm, 200 Ohm, 500 Ohm, 1000 Ohm 1,5 watt
max. 2 only Ohmage 5000 or optional: 100, 200, 500, 1000 Ohm; 1,5 Watt;
TÜV-approved potentiometer
Not compatible for use with the heating resistor or RI21! No retrofitting possible!
0 (2) ... 10V; 0 (4) ... 20 mA - Only one potentiometer possible.
Electronic position indicator RI 21
Using the temperature controller, installation is only possible in the control cabinet.
Electronic position indicator RI 32 2 ... 10V; 4 ... 20 mA - Only one potentiometer possible.
0 (2) ... 10V; 0 (4) ... 20 mA - Only one potentiometer possible.
Electronic position controller ES 11
Not compatible for use with the temperature controller.
Heating resistor (automatic switching circuit) 230 VAC, 115VAC, 24VAC, 15 Watt
24V - 50Hz
24V - 50Hz / 24V - 60Hz*
24V - 60Hz*
24V - 50/60Hz * 115V - 50Hz / 115V - 60Hz*
Additional voltage / frequencies 115V - 50Hz
115V - 50/60Hz * 230V - 60Hz*
115V - 60Hz*
3~400V - 50Hz / 3~400V - 60Hz*
230V - 60Hz*
2 torque switches and 1 travel switch, zero potential, switching
Standard-voltage connection board PA Possible at standard design
capacity 10A, 250V∼
2 torque switches and 1 travel switch, zero potential,
Low-voltage connection board
for free wiring, with gold contacts,
(electronic system) NA
for low switching capacities and at aggressive atmosphere, switching capacity max. 0,1A, 4-30V
Temperature controller (3-state stepper controller) in microprocessor technology.
Control range: -200˚C to 850°C (resistance thermometer)
Voltage: 24V, 115V or 230V 50/60Hz
Integrated temperature-controller dTRON 16.1
Compatible with resistance thermometers and thermocouples (provided by customer), standardized
active current or voltage signals.
Not compatible for use with the ES 11!
Actuator with 400V-50Hz and
440V-60Hz
Integrated reversing contactor --
Only 1 electronic module
possible!
Only in addition with
Phase control relay --
integrated reversing contactor!
DC-Module To control ARI-PREMIO 230V-50Hz with 24VDC.
--
3-step converter Not compatible for use with the temperature controller!
* Control speed and power consumption are 20% higher at frequency of 60 Hz.

Edition 09/05 - Data subject to alteration 8

 Additional options
Integrated temperature controller dTRON 16.1
Features
• Structured scheme of operation and programming
• Auto-tune
• Slope-function
• Program function with 4 program sections
• 2 limit-comparators
• Interlock for keyboard and level
• 2 setpoints with changeover
• 2 parameter sets with changeover
• Freely configurable control ranges from -200˚C to +850˚C (resistance thermometer)
• 4 digit resolution (max. 2 decimal places)
• Controller characteristic P, PD, PI or PID
• Actual value input by usual temperature sensors (see in table)
• 2 relay outputs
• 1 three-step output for actuator motor
• 1 combined binary output/logic output
• 1 optional input for external setpoint or RS 485
• digital input filter with programmable filtertime constant

Block structure Function in the ARI-PREMIO-Thrust actuator

Input 1 Output 1
Input for actual value by - Relay
PT100, Pt 1000, thermo-
couples or standardized
signals Output 2
dTRON 16.1 - Relay
Input 2, optional
Temperature
E.g. RS 485 or controller Three-step-output
external set point setting for actuator motor
by standardized signals

Temperature-
Power supply sensor
110-240VAC, 48-63Hz
or
20-53V, 0/48-63Hz

Binary input Logic output

for zero-potential or 5V
contact

Sensor (provided by customer) Control range Remark

Resistance thermometer
Pt 100 -200...+850°C Two- or three-wire connection,
high precision and long-term stability (PTC
Pt 1000 -200...+850°C resistor), comparatively small temperature range

Thermocouples
Fe-Con „L“ -200 ...+900°C
Fe-Con „J“ -200 ...+1200°C
NiCr-Ni „K“ -200 ...+1372°C
Cu-Con „U“ -200 ...+600°C Large temperature range,
NiCrSi-NiSi „N“ -100 ...+1300°C lower long-term stability and precision
Pt10Rh-Pt „S“ 0 ........+1768°C
Pt13Rh-Pt „R“ 0 ........+1768°C
Pt30Rh-Pt6Rh „B“ 0 ........+1820°C

Standardized active current or voltage signals

0 (4) ... 20mA variable Voltage drop ∆Ue < 1V
0 (2) ... 10V variable Internal resistance Ri = 500 kΩ

Edition 11/02 - Data subject to alteration 9

10
Clearance required for
removal of hood

Clearance required for

removal of hood
Clearance required for
removal of hood

GERMAN QUALITY VALVES

Technology for the Future.
X L h
236 602 max. 30 mm
256 622 max. 50 mm

ARI-Armaturen Albert Richter GmbH & Co. KG, D-33756 Schloß Holte-Stukenbrock,
271 637 max. 65 mm
286 652 max. 80 mm

ARI-PREMIO 2,2 - 5 kN ARI-PREMIO 2,2 - 5 kN ARI-PREMIO 12 - 15 kN

Nominal travel max. 30 mm Nominal travel > 30 mm - 50 mm Nominal travel max. 80 mm

Tel. +49 52 07 / 994-0, Telefax +49 52 07 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: [email protected]
Edition 01/05 - Data subject to alteration
Dimensions