TA785G3+ Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
 Table of Contents
Chapter 1: Introduction ............................................................ 1
1.1 Before You Start ................................................................................ 1
1.2 Package Checklist ............................................................................. 1
1.3 Motherboard Features...................................................................... 2
1.4 Rear Panel Connectors ..................................................................... 3
1.5 Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation ............................................. 5
2.1 Installing Central Processing Unit (CPU)....................................... 5
2.2 FAN Headers...................................................................................... 7
2.3 Installing System Memory ................................................................ 8
2.4 Connectors and Slots ....................................................................... 10
Chapter 3: Headers & Jumpers Setup ..................................... 12
3.1 How to Setup Jumpers .................................................................... 13
3.2 Detail Settings.................................................................................. 13
Chapter 4: Hybrid CrossFireX Function................................... 19
4.1 Hybrid CrossFireX Requirements.................................................. 19
4.2 Hybrid CrossFireX Installation....................................................... 19
Chapter 5: RAID Functions ..................................................... 20
5.1 Operation System............................................................................ 20
5.2 Raid Arrays ...................................................................................... 20
5.3 How RAID Works............................................................................. 20
Chapter 6: T-Series BIOS & Software ..................................... 23
6.1 T-Series BIOS..................................................................................... 23
6.2 T-Series Software ............................................................................. 31
Chapter 7: Useful Help ............................................................ 41
7.1 Driver Installation Note.................................................................. 41
7.2 Extra Information............................................................................ 42
7.3 AMI BIOS Beep Code....................................................................... 43
7.4 Troubleshooting............................................................................... 44
Appendix: SPEC In Other Language........................................ 45
German.................................................................................................................. 45
France .................................................................................................................... 47
Italian..................................................................................................................... 49
Spanish ................................................................................................................... 51
Portuguese ............................................................................................................ 53
Polish...................................................................................................................... 55
Russian ................................................................................................................... 57
Arabic..................................................................................................................... 59
Japanese ................................................................................................................ 61
 TA785G3+

CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„ Prepare a dry and stable working environment with
sufficient lighting.
„ Always disconnect the computer from power outlet
before operation.
„ Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
„ Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
„ Keep the computer from dangerous area, such as heat
source, humid air and water.
„ The operating temperatures of the computer should be
0 to 45 degrees Celsius.

1.2 PACKAGE CHECKLIST

IDE Cable X 1 (optional)
Serial ATA Cable X 3
Serial ATA Power Cable X 1
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)

Note: The package contents may be different due to area or your motherboard version.

1
Motherboard Manual

1.3 MOTHERBOARD FEATURES

SPEC

Socket AM3 AMD 64 Architecture enables 32 and 64 bit

CPU AMD Sempron / Phenom II / Athlon II computing

processors Supports Hyper Transport 3.0

Support HyperTransport 3.0

FSB
Supports up to 5.2 GT/s Bandwidth

AMD 785G
Chipset
AMD SB710

ITE 8718F Environment Control initiatives,

Provides the most commonly used legacy H/W Monitor

Super I/O
Super I/O functionality. Fan Speed Controller

Low Pin Count Interface ITE's "Smart Guardian" function

DDR3 DIMM Slots x 4

Dual Channel Mode DDR3 memory module
Main Max Memory Capacity 16GB
Supports DDR3 800 / 1066 / 1333
Memory Each DIMM supports 512MB/
Supports DDR3 1600 (OC)
1GB/2GB/4GB DDR3

Max Shared Video Memory is 512MB

Graphics AMD 785G (Radeon HD4200)
DVI/UVD/HDCP support

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

IDE AMD SB710
supports PIO Mode 0~4,

Data transfer rates up to 3 Gb/s.

SATA II AMD SB710 SATA Version 2.0 specification compliant.

RAID 0,1,10 support

10 / 100 Mb/s / 1Gb/s auto negotiation

LAN Realtek RTL 8111DL
Half / Full duplex capability

5.1channels audio out

Sound ALC662
Supports HD Audio

PCI Slot x2 Supports PCI expansion cards

Slots
PCI Express Gen2 x16 Slot x1 Supports PCI-E Gen2 x16 expansion cards

On Board Floppy Connector x1 Each connector supports 2 Floppy drives

Connectors IDE Connector x1 Each connector supports 2 IDE device

SATA Connector x6 Each connector supports 1 SATA devices

Front Panel Connector x1 Supports front panel facilities

2
 TA785G3+
SPEC

Front Audio Connector x1 Supports front panel audio function

S/PDIF out Connector x1 Supports digital audio out function

CPU Fan Header x1 CPU Fan power supply (with Smart Fan function)

System Fan Header x2 System Fan Power supply

CMOS clear Header x1 Restore CMOS data to factory default

USB Connector x3 Each connector supports 2 front panel USB ports

Printer Port Connector x1 Each connector supports 1 Printer port

Serial Port Connector x1 Connects to RS-232 Port

Power Connector (24pin) x1 Connects to Power supply

Power Connector (4pin) x1 Connects to Power supply

PS/2 Keyboard x1 Connects to PS/2 Keyboard

PS/2 Mouse x1 Connects to PS/2 Mouse

VGA Port x1 Connect to D-SUB monitor

Back Panel
DVI-D Port x1 Connect to DVI monitor
I/O
LAN Port x1 Connect to RJ-45 ethernet cable

USB Port x4 Connect to USB devices

Audio Jack x3 Provide Audio-In/Out and microphone connection

Board Size 233 mm (W) x 244 mm (L) uATX

Biostar reserves the right to add or remove support

OS Support Windows XP / Vista / 7
for any OS With or without notice.

1.4 REAR PANEL CONNECTORS

PS/2 LAN
Mouse Line In/
Surround

Line Out

Mic In 1/
Bass/ Center

PS/ 2 DVI-D VGA USBX2 USBX2

Keyboard

3
Motherboard Manual

1.5 MOTHERBOARD LAYOUT

PH1 PH3
PH2
KBMS1
CPU_FAN1

ATXPWR2
D V I1

S o ck e t
JCMOS1

DDR3_ A 1

DDR3_ B 1

DDR3_ A 2

DDR3_ B 2
VG A 1

AM3
BIOS

ATXPWR1

USB1

RJ45USB1

AUDIO1 SYS_FAN1
JUSBV1
AMD
785G
LAN
IDE 1

BAT1
PEX16_1

Super I/O
AMD
PCI1 SB710
F_USB3

JSPDIFOUT1 SATA5 SATA6

JUSBV2
LED_D 2
LED_D 1

Codec
PCI2 SATA3 SATA4

SYS_FAN2
SATA1 SATA2
FDD1
F_AUDIO1 J_PRINT1 J_COM1 F_USB2 F_USB1 SW_RST1 SW_PWR1 PANEL1

Note: ■ represents the 1st pin.

4
 TA785G3+

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.

Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.

5
Motherboard Manual

Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.

6
 TA785G3+

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1 4

Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
sense
4 Smart Fan
Control (By Fan)

SYS_FAN1: NorthBridge Fan Header

SYS_FAN2: System Fan Header

Pin Assignment
SYS_FAN1 1 Ground
2 +12V
3 FAN RPM
rate sense
3 1
1 3

SYS_FAN2
Note:
CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.

7
Motherboard Manual
2.3 INSTALLING SYSTEM MEMORY
A. DDR3 Modules

D DR 3_ A1
D DR 3_ B1
D DR 3_ A2
D DR 3_ B2
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

8
 TA785G3+

B. Memory Capacity
DIMM Socket Total Memory
DDR3 Module
Location Size
DDR3_A1 512MB/1GB/2GB/4GB
DDR3_B1 512MB/1GB/2GB/4GB
Max is 16GB.
DDR3_A2 512MB/1GB/2GB/4GB
DDR3_B2 512MB/1GB/2GB/4GB

C. Dual Channel Memory installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1 DDR3_B1 DDR3_A2 DDR3_B2

Enabled O O X X
Enabled X X O O
Enabled O O O O
(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or
x16)

9
Motherboard Manual
2.4 CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types.

2 34

1 33

IDE1: IDE/ATAPI Connector

The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode
0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

1 2

39 40

SATA1~SATA6: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin Assignment
1 Ground
2 TX+
3 TX-
SATA5 SATA6 4 Ground
SATA3 SATA4 5 RX-
SATA1 SATA2 6 RX+
7 Ground

7 4 1

10
 TA785G3+

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX
power supply.
12 24

1 13
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

ATXPWR2: ATX Power Source Connector

Connecting this connector will provide +12V to CPU power circuit.

1 4

2 3

Pin Assignment
1 +12V
2 +12V
3 Ground
4 Ground

Note:
Before power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.

11
Motherboard Manual

PEX16_1: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.
- Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
- 2X bandwidth over the PCI-Express 1.1 architecture.

PE X1 6 _ 1

PCI1/PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

12
 TA785G3+

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

PWR_LED
On/Off
+ + -
9 16
1 8
+ -

SPK RST
HLED

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
N/A
2 N/A Speaker 10 N/A
3 N/A Connector 11 N/A N/A
4 Speaker 12 Power LED (+)
5 HDD LED (+) Hard drive 13 Power LED (+) Power LED
6 HDD LED (-) LED 14 Power LED (-)
7 Ground 15 Power button
Reset button Power-on button
8 Reset control 16 Ground

13
Motherboard Manual

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

1
1
3
3 Pin 1-2 Close:
Normal Operation
(default).

3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.

J_COM1: Serial port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment
1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal ready
5 Signal ground
6 Data set ready
7 Request to send
2 10
8 Clear to send
9 Ring indicator
10 NC
1 9

14
 TA785G3+
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.

Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in
2 10 10 Jack Sense

1 9

JSPDIFOUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground

1 3

15
Motherboard Manual

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

2 26

1 25
Pin Assignment Pin Assignment
1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy
9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

16
 TA785G3+

F_USB1~F_USB3: Headers for USB 2.0 Ports at Front Panel

These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
F _USB3 7 Ground
8 Ground
F_ USB2 F_USB1 9 Key
2 10 10 NC

1 9

JUSBV1/JUSBV2: Power Source Headers for USB Ports

Pin 1-2 Close:
JUSBV1: +5V for USB ports at USB1/RJ45USB1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2/F_USB3.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USB1/RJ45USB1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2/F_USB3.

1 3
Pin 1-2 close
JUSBV1
1
3

1 3 1 3
Pin 2-3 close

JUSBV2

17
Motherboard Manual

On-Board LED Indicators

There are 5 LED indicators showing system status.

PH2
PH1 PH3

LED_D1

LED_D2

LED_D1 & LED_D2: Debug Indicators

PH1 ~ PH3: Power Status Indicators
Please refer to the tables below for specific messages:
LED_D1 LED_D2 Message
ON ON Normal
ON OFF Memory Error
OFF ON VGA Error
OFF OFF Abnormal: CPU / Chipset error.

PH1~PH3 Phase Indicator

ON Phase Active
OFF Phase Disable

On-Board Buttons
There are 2 on-board buttons.

SW_PWR1

SW_RST1
SW_RST1: Reset button.
SW_PWR1: Power Switch button.
18
 TA785G3+

CHAPTER 4: HYBRID CROSSFIREX FUNCTION

4.1 HYBRID CROSSFIREX REQUIREMENTS
A graphics card with Radeon HD3450/HD3470 GPU.
The graphics card driver should support Hybrid CrossFireX technology.
The power supply unit must provide at least the minimum power required by
the system, or the system will be unstable. A power supply above 450W is
recommended under Hybrid CrossFireX mode.

4.2 HYBRID CROSSFIREX INSTALLATION

Step 1: Insert the Hybrid CrossFireX-Ready graphics card into PEX16_1.

Radeon H D3450
Radeon H D3470

PEX16_1

Notice: Make sure the graphics card is seated into slot completely.

Step 2: In the graphics card configuration program, choose “Hybrid

CrossFireX” function. Installation completes.

NOTE
For more detail information of Hybrid CrossFireX function, please visit following
web-sites:
http://game.amd.com/us-en/crossfirex_hybrid.aspx
http://ati.amd.com/technology/hybridgraphics/index.html

19
Motherboard Manual
CHAPTER 5: RAID FUNCTIONS
5.1 OPERATING SYSTEM
Supports Windows XP, Windows Vista, and Windows 7.

5.2 RAID ARRAYS

RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.

5.3 HOW RAID WORKS

RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­ Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
­ Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
­ Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
­ Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
­ Fault Tolerance: No.

Block 1 Block 2
Block 3 Block 4
Block 5 Block 6

20
 TA785G3+

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­ Drives: Minimum 2, and maximum is 2.
­ Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
­ Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
­ Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
­ Fault Tolerance: Yes.

Block 1 Block 1
Block 2 Block 2
Block 3 Block 3

21
Motherboard Manual

RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­ Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
­ Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
­ Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
­ Fault Tolerance: Yes.

Block 1 Block 1 Block 2 Block 2

Block 3 Block 3 Block 4 Block 4
Block 5 Block 5 Block 6 Block 6

22
 TA785G3+

CHAPTER 6: T-SERIES BIOS & SOFTWARE

6.1 T-SERIES BIOS
T-Series BIOS Features
Overclocking Navigator Engine (O.N.E.)

Memory Integration Test (M.I.T., under Overclock Navigator Engine)

BIO-Flasher: Update BIOS file from USB Flash Drive or FDD

Self Recovery System (S.R.S)

Smart Fan Function

CMOS Reloading Program

!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described below in
this manual is for your reference only and the actual BIOS
information and settings on board may be different from this
manual. For further information of setting up the BIOS, please
refer to the BIOS Manual in the Setup CD.

A. Overclocking Navigator Engine (O.N.E.)

ONE provides two powerful overclocking engines: MOS and AOS for both
Elite and Casual overclockers.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display Normal
after overclocking. Automate OverClock
Manual OverClock
OverClock Navigator [Normal]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control
> Hyper Transport Configuration Select Item
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

23
Motherboard Manual

Manual Overclock System (M.O.S.)

MOS is designed for experienced overclock users.
It allows users to customize personal overclock settings.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display Normal
after overclocking. Automate OverClock
Manual OverClock
OverClock Navigator [Normal]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
Options
============ Manual OverClock System
Normal ============
CPU/HT Reference Clock (MHz)Automate
[200] OverClock
Spread Spectrum [Disabled]
> Over-Voltage ConfigurationManual OverClock
> CPU FID/VID Control Select Screen
> Hyper Transport Configuration Select Item
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

↓
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display Normal
after overclocking. Automate OverClock
Manual OverClock
OverClock Navigator [Manual OverClock]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control Select Item
> Hyper Transport Configuration
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

CPU/HT Reference Clock (MHz)

This item allows BIOS to select CPU Over Clock.
Spread Spectrum
This item allows you to control Spread Spectrum function.
Over-Voltage Configuration
Enter this function for more advanced voltage settings.
CPU FID/VID Control
Enter this function for more advanced CPU settings.

24
 TA785G3+
Hyper Transport Configuration
Enter this function for more advanced Hyper Transport settings.
DRAM Timing Configuration
Enter this function for more advanced DRAM clock settings.
G.P.U Phase Control
Enter this function for more power saving settings.

NOTE
Overclock is an optional process, but not a “must-do” process; it is
not recommended for inexperienced users. Therefore, we will not
be responsible for any hardware damage which may be caused by
overclocking. We also would not guarantee any overclocking
performance.

Automatic Overclock System (A.O.S.)

For beginners in overclock field, BET had developed an easy, fast, and
powerful feature to increase the system performance, named A.O.S.
Based on many tests and experiments, A.O.S. provides 3 ideal overclock
configurations that are able to raise the system performance in a single
step.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display Normal
after overclocking. Automate OverClock
Manual OverClock
OverClock Navigator [Normal]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
Options
============ Manual OverClock System
Normal ============
CPU/HT Reference Clock (MHz)Automate
[200] OverClock
Spread Spectrum [Disabled]
> Over-Voltage ConfigurationManual OverClock
> CPU FID/VID Control Select Screen
> Hyper Transport Configuration Select Item
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

25
Motherboard Manual
V6 Tech Engine
This engine will make a good over-clock performance.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display V6-Tech Engine
after overclocking. V8-Tech Engine
V12-Tech Engine
OverClock Navigator [Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control Select Item
> Hyper Transport Configuration
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

V8 Tech Engine
This engine will make a better over-clock performance.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display V6-Tech Engine
after overclocking. V8-Tech Engine
V12-Tech Engine
OverClock Navigator [Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System [V8-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control Select Item
> Hyper Transport Configuration
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

V12 Tech Engine

This engine will make a best over-clock performance.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display V6-Tech Engine
after overclocking. V8-Tech Engine
V12-Tech Engine
OverClock Navigator [Automate OverClock]
=========== Automate OverClock System ===========
Auto OverClock System [V12-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control Select Item
> Hyper Transport Configuration
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

26
 TA785G3+
Notices:
Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.

B. Memory Integration Test (M.I.T.)

This function is under “Overclocking Navigator Engine” item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is “Disabled”; the condition parameter should
be changed to “Enable” to proceed this test.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display Enabled
after overclocking. Disabled
OverClock Navigator [Normal]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control Select Item
> Hyper Transport Configuration
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Disabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

↓
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Chipset T-Series Exit

T-Series Settings Options

Notice: Please Clear CMOS if system no display Enabled
after overclocking. Disabled
OverClock Navigator [Normal]
=========== Automate OverClock System ===========
Auto OverClock System [V6-Tech Engine]
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum [Disabled]
> Over-Voltage Configuration Select Screen
> CPU FID/VID Control Select Item
> Hyper Transport Configuration
> DRAM Timing Configuration +- Change Option
> G.P.U Phase Control F1 General Help
Integrated Memory Test [Enabled] F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from “Enable” to “Disable”
to complete the test.

27
Motherboard Manual

C. BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to
update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIO-Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, save the BIOS file into a USB pen drive or a floppy disk.

3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.

4. Power on or reset the computer and then

press <F12> during the POST process.
A select dialog as the picture on the right
appears.
Select the device contains the BIOS file and
press <Enter> to enter the utility.

5. The utility will show the BIOS

files and their respective
information. Select the proper
BIOS file and press <Enter>
then <Y> to perform the BIOS
update process.

6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes.

z This utility only allows storage device with FAT32/16 format and single
partition.
z Shutting down or resetting the system while updating the BIOS will lead to
system boot failure.

28
 TA785G3+

D. Self Recovery System (S.R.S.)

This function can’t be seen under BIOS setup; and is always on whenever the
system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default BIOS
setting, and all overclock settings will be re-configured.

E. Smart Fan Function

Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.

BIOS SETUP UTILITY

Main Advanced PCIPnP Boot Chipset T-Series Exit

Advanced Settings Configure CPU.

WARNING: Setting wrong values in below sections
may cause system to malfunction.
> CPU Configuration
> SuperIO Configuration
> Smart Fan Configuration
> Hardware Health Configuration
> Power Configuration
> USB Configuration
> AUDIO Configuration Select Screen
> Onboard LAN Configuration Select Item
EnterGo to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

↓
BIOS SETUP UTILITY
Advanced

Smart Fan Configuration When you choice [Auto]

,[3Pin] or [4Pin],
CPU Smart Fan [Disabled] please run the
Smart Fan Calibration calibration to define
Control Mode the Fan parameters for
Fan Ctrl OFF(oC) Smart Fan control
o
Fan Ctrl On( C)
Fan Ctrl Start value
Fan Ctrl Sensitive

Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

29
Motherboard Manual
Smart Fan Calibration
Choose this item and then the BIOS will automatically test and detect the
CPU/System fan functions and show CPU/System fan speed.

Control Mode
This item provides several operation modes of the fan.

Fan Ctrl OFF(℃)

If the CPU/System temperature is lower than the set value, the CPU/
System fan will turn off. The range is from 0~127, with an interval of 1.

Fan Ctrl On(℃)

The CPU/System fan starts to work when CPU/System temperature
arrives to this set value. The range is from 0~127, with an interval of 1.

Fan Ctrl Start Value

When CPU/System temperature arrives to the set value, the CPU/System
fan will work under Smart Fan Function mode. The range is from 0~127,
with an interval of 1.

Fan Ctrl Sensitive

Increasing the value of slope PWM will raise the speed of CPU/System fan.
The range is from 1~127, with an interval of 1.

F. CMOS Reloading Program

It allows users to save different CMOS settings into BIOS-ROM.
Users are able to reload any saved CMOS setting for customizing system
configurations. Moreover, users are able to save an ideal overclock setting
during overclock operation.
There are 10 sets of record addresses in total, and users are able to name the
CMOS data according to personal preference.

BIOS SETUP UTILITY

Main Advanced PCIPnP Boot Chipset T-Series Exit

Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
CMOS Backup Func
CMOS Data Reload
CMOS Backup Function CMOS Data Save

Security Settings Select Screen

Select Item
> Security Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit

vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.

30
 TA785G3+

6.2 T-SERIES SOFTWARE

Installing T-Series Software

1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.

Launching T-Series Software

After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.

TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and tools
such as Overclocking for enhancing system performance, also for special
enhancement on CPU and Memory. Smart-Fan control is for managing fan
speed control of both CPU cooling fan and North-Bridge Chipset cooling fan.
PC health is for monitoring system status. And pre-set OC modes are for easy
OC.

31
Motherboard Manual

The CPU tab provides information on the CPU and motherboard.

The Memory tab provides information on the memory module(s).

You can select memory module on a specific slot to see its information.

The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:

32
 TA785G3+

The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.

The Memory tab provides information about manufacturer and software

version. You can update new version by clicking the button “Live Update.”

33
Motherboard Manual

Green Power Utility

BIOSTAR G.P.U (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading. It
integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature; moreover, it optimizes power saving and best power efficiency
on your system.

34
 TA785G3+

G.P.U Mode Setting

This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.

Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.

„ Auto Phase Mode

System switches the mode automatically according to current system
loading condition.

„ Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.

„ Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.

„ Medium Mode
This is the standard system power saving mode.

„ Maxi-Energy Mode
This is the best system performance mode.

35
Motherboard Manual

eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.

represent s import ant

*information that you
This block will show
must provide. Without
this informat ion, you may
the information which * Describe condition
of your system.
would be collect ed in
not be able to send out the mail.
the mail.

* Select your area or

the area close to you.

Provide the e-mail

address that you would
like to send t he copy to.

* Provide the name of

the memory module
manufacturer.

Provide the name of

the power supply
manufacturer and the
model no.

Send the mail out. Exit this dialog.

Save these information to a .txt file

After filling up this information, click “Send”

to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.

36
 TA785G3+

Enter the file name and then click

“Save”. Your system information
will be saved to a .txt file.

Open the saved .txt file, you will see

your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.

If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.

37
Motherboard Manual

BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.

Show current BIOS information

AWARD BIOS AMI BIOS

Clear CMOS function Online Update function

(Only for AWARD BIOS) (Only for AMI BIOS)

Save current BIOS

to a .bin file

Update BIOS
with a BIOS file

<Backup BIOS>

Once click on this button, the saving

dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.

After the saving process, finish

dialog will show. Click on OK to
complete the BIOS Backup
procedure.

38
 TA785G3+

<Update BIOS>

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.

Then click Update BIOS button, a

dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.

After the BIOS Backup procedure, the

open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.

The utility will update BIOS with the

proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.

After the BIOS Update process, click on

OK to restart the system.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.

39
Motherboard Manual

<Online Update> (for AMI BIOS only)

Automatically download and update the latest BIOS via internet; make sure
that the computer is connected to the internet before using this function.

After clicking on the Onlinr Update

button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.

If there is no other newer BIOS

version, the utility will also tell you that
your BIOS has been the latest version.

Download completes; the utility will

ask you to program (update) the
BIOS. Click Yes to proceed.

The programing procedure may take minutes, please do not make any operation
during the programing process.

After the updating process, the utility will

ask you to reboot the system. Click OK
to reboot.

While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.

In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.

All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this manual.

40
 TA785G3+
CHAPTER 7: USEFUL HELP
7.1 DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html

41
Motherboard Manual

7.2 EXTRA INFORMATION

CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown

automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.

Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

42
 TA785G3+
7.3 AMI BIOS BEEP CODE
Boot Block Beep Codes
Number of Beeps Description
1 No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
2
A:
3 Insert next diskette if multiple diskettes are used for recovery
4 Flash Programming successful
5 File read error
7 No Flash EPROM detected
10 Flash Erase error
11 Flash Program error
12 “AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
13
image present in flash device)

POST BIOS Beep Codes

Number of Beeps Description
1 Memory refresh timer error
3 Base memory read/write test error
6 Keyboard controller BAT command failed
7 General exception error (processor exception interrupt error)
8 Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps Troubleshooting Action
1, 3 Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
6, 7 cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
8
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.

43
Motherboard Manual

7.4 TROUBLESHOOTING
Probable Solution
1. There is no power in the system. 1. Make sure power cable is
Power LED does not shine; the securely plugged in.
fan of the power supply does not 2. Replace cable.
work 3. Contact technical support.
2. Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit, the DIMM, press down firmly until the
and hard drives are running. module snaps into place.
System does not boot from a hard disk 1. Check cable running from disk to
drive, but can be booted from optical disk controller board. Make sure
drive. both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical 1. Back up data and applications
drive. Hard disks can be read, files.
applications can be used, but system 2. Reformat the hard drive.
fails to boot from a hard disk. Re-install applications and data
using backup disks.
Screen message shows “Invalid Review system’s equipment. Make sure
Configuration” or “CMOS Failure.” correct information is in setup.
System cannot boot after user installs a 1. Set master/slave jumpers
second hard drive. correctly.
2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

44
 TA785G3+

APPENDIX: SPEC IN OTHER LANGUAGE

GERMAN
Spezifikationen

Sockel AM3 Die AMD 64-Architektur unterstützt eine 32-Bit- und

CPU AMD Sempron / Phenom II / Athlon II 64-Bit-Datenverarbeitung

Prozessoren Unterstützt Hyper Transport 3.0

Unterstützt HyperTransport 3.0 mit einer

FSB
Bandbreite von bis zu 5.2 GT/s

AMD 785G
Chipsatz
AMD SB710

ITE 8718F Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung

Super E/A
E/A-Funktionen. Lüfterdrehzahl-Controller

Low Pin Count-Schnittstelle "Smart Guardian"-Funktion von ITE

DDR3 DIMM-Steckplätze x 4
Dual-Kanal DDR3 Speichermodul
Arbeitsspeich Max. 16GB Arbeitsspeicher
Unterstützt DDR3 800 / 1066 / 1333
er Jeder DIMM unterstützt 512MB/
Unterstützt DDR3 1600 (OC)
1GB/2GB/4GB DDR3.

Max. 512MB gemeinsam benutzter Videospeicher

Grafik AMD 785G (Radeon HD4200)
Unterstützt DVI/UVD/HDCP

Ultra DMA 33 / 66 / 100 / 133 Bus Master-Modus

IDE AMD SB710
Unterstützt PIO-Modus 0~4,

Datentransferrate bis zu 3Gb/s

SATA II AMD SB710 Konform mit der SATA-Spezifikation Version 2.0.

Unterstützt RAID 0,1,10

10 / 100 / 1000 Mb/s Auto-Negotiation

LAN Realtek RTL 8111DL
Halb-/ Vollduplex-Funktion

5.1-Kanal-Audioausgabe
Audio-Codec ALC662
Unterstützt High-Definition Audio

PCI Steckplatz x2
Steckplätze
PCI Express Gen2 x16 Steckplatz x1

45
Motherboard Manual
Spezifikationen

Diskettenlaufwerkanschluss x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke

SATA-Anschluss x6 Jeder Anschluss unterstützt 1 SATA-Laufwerk

Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

S/PDIF Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion

CPU-Lüfterstromversorgungsanschluss (mit Smart

Onboard-Ans CPU-Lüfter-Sockel x1
Fan-Funktion)
chluss
System-Lüfter-Sockel x2 System-Lüfter-Stromversorgungsanschluss

"CMOS löschen"-Sockel x1

Jeder Anschluss unterstützt 2

USB-Anschluss x3
Fronttafel-USB-Anschlüsse

Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss

Serieller Anschluss x1

Stromanschluss (24-polig) x1

Stromanschluss (4-polig) x1

PS/2-Tastatur x1

PS/2-Maus x1

VGA-Anschluss x1
Rückseiten-E
DVI-D-Anschluss x1
/A
LAN-Anschluss x1

USB-Anschluss x4

Audioanschluss x3

Platinengröße 233 mm (B) X 244 mm (L)

Biostar behält sich das Recht vor, ohne Ankündigung

OS-Unterstüt
Windows XP / Vista / 7 die Unterstützung für ein Betriebssystem
zung
hinzuzufügen oder zu entfernen.

46
 TA785G3+

FRENCH
SPEC

Socket AM3
L'architecture AMD 64 permet le calcul 32 et 64 bits
UC Processeurs AMD Sempron / Phenom II /
Prend en charge Hyper Transport 3.0
Athlon II

Prend en charge Hyper Transport 3.0 jusqu'à

Bus frontal
une bande passante de 5.2 GT/s

AMD 785G
Chipset
AMD SB710

ITE 8718F Initiatives de contrôle environnementales,

Fournit la fonctionnalité de Super E/S Moniteur de matériel

Super E/S
patrimoniales la plus utilisée. Contrôleur de vitesse de ventilateur

Interface à faible compte de broches Fonction "Gardien intelligent" de l'ITE

Fentes DDR3 DIMM x 4

Module de mémoire DDR3 à mode à double voie
Mémoire Capacité mémoire maximale de 16 Go
Prend en charge la DDR3 800 / 1066 / 1333
principale Chaque DIMM prend en charge des DDR3 de
Prend en charge la DDR3 1600 (OC)
512Mo/1Go/2Go/4Go

Mémoire vidéo partagée maximale de 512 Mo

Graphiques AMD 785G (Radeon HD4200)
Prise en charge DVI/UVD/HDCP

Mode principale de Bus Ultra DMA 33 / 66 / 100 /

IDE AMD SB710 133

Prend en charge le mode PIO 0~4,

Taux de transfert jusqu'à 3 Go/s.

SATA II AMD SB710 Conforme à la spécification SATA Version 2.0

Prise en charge RAID 0,1,10

10 / 100 / 1000 Mb/s négociation automatique

LAN Realtek RTL 8111DL
Half / Full duplex capability

Sortie audio à 5.1 voies

Codec audio ALC662
Prise en charge de l'audio haute définition

Fente PCI x2
Fentes
Fente PCI Express Gen2 x16 x1

47
Motherboard Manual
SPEC

Chaque connector prend en charge 2 lecteurs de

Connecteur de disquette x1
disquettes

Chaque connector prend en charge 1 Port

Connecteur de Port d'imprimante x1
d'imprimante

Chaque connecteur prend en charge 2 périphériques

Connecteur IDE x1
IDE

Chaque connecteur prend en charge 1 périphérique

Connecteur SATA x6
SATA

Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant

Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant

Prend en charge la fonction de sortie audio

Connecteur de sortie S/PDIF x1
numérique
Connecteur
Alimentation électrique du ventilateur UC (avec
embarqué Embase de ventilateur UC x1
fonction de ventilateur intelligent)

Embase de ventilateur système x2 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Chaque connecteur prend en charge 2 ports USB de

Connecteur USB x3
panneau avant

Chaque connector prend en charge 1 Port

Connecteur de Port d'imprimante x1
d'imprimante

Port série x1

Connecteur d'alimentation x1

(24 broches)

Connecteur d'alimentation x1

(4 broches)

Clavier PS/2 x1

Souris PS/2 x1

E/S du Port VGA x1

panneau Port DVI-D x1
arrière Port LAN x1

Port USB x4

Fiche audio x3
Dimensions
233 mm (l) X 244 mm (H)
de la carte

Biostar se réserve le droit d'ajouter ou de supprimer

Support SE Windows XP / Vista / 7
le support de SE avec ou sans préavis.

48
 TA785G3+

ITALIAN
SPECIFICA

Socket AM3 L’architettura AMD 64 abilita la co mputazione 32

CPU Processori AMD Sempron / Phenom II / e 64 bit

Athlon II Supporto di Hyper Transport 3.0

Supporto di HyperTransport 3.0 fino a

FSB
5.2 GT/s di larghezza di banda

AMD 785G
Chipset
AMD SB710

ITE 8718F Funzioni di controllo dell’ambiente:

Fornisce le funzionalità legacy Super Monitoraggio hardware

Super I/O
I/O usate più comunemente. Controller velocità ventolina

Interfaccia LPC (Low Pin Count) Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 4

Modulo di memoria DDR3 a canale doppio
Memoria Capacità massima della memoria 16GB
Supporto di DDR3 800 / 1066 / 1333
principale Ciascun DIMM supporta DDR3
Supporto di DDR3 1600 (OC)
512MB/1GB/2GB/4GB

La memoria video condivisa massima è di 512 MB

Grafica AMD 785G (Radeon HD4200)
Supporto DVI/UVD/HDCP

Modalità Bus Master Ultra DMA 33 / 66 / 100 / 133

IDE AMD SB710
Supporto modalità PIO Mode 0-4

Velocità di trasferimento dei dati fino a 3 Gb/s.

SATA II AMD SB710 Compatibile specifiche SATA Versione 2.0.

Supporto RAID 0,1,10

Negoziazione automatica 10 / 100 / 1000 Mb/s

LAN Realtek RTL 8111DL
Capacità Half / Full Duplex

Codec Uscita audio 5.1 canali

ALC662
audio Supporto audio High-Definit ion (HD)

Alloggio PCI x2
Alloggi
Alloggio PCI Express Gen2 x16 x1

49
Motherboard Manual
SPECIFICA

Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy

Connettore Porta stampante x1 Ciascun connettore supporta 1 Porta stampante

Connettore IDE x1 Ciascun connettore supporta 2 unità IDE

Connettore SATA x6 Ciascun connettore supporta 1 unità SATA

Connettore pannello frontale x1 Supporta i servizi del pannello frontale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Connettore output S/PDIF x1 Supporta la funzione d’output audio digitale

Alimentazione ventolina CPU (con funzione Smart

Collettore ventolina CPU x1
Fan)
Connettori
Collettore ventolina sistema x2 Alimentazione ventolina di sistema
su scheda
Collettore cancellaz ione CMOS x1

Ciascun connettore supporta 2 porte USB

Connettore USB x3
pannello frontale

Connettore Porta stampante x1 Ciascun connettore supporta 1 Porta stampante

Porta seriale x1

Connettore alimentazione x1

(24 pin)

Connettore alimentazione x1

(4 pin)

Tastiera PS/2 x1

Mouse PS/2 x1

I/O Porta VGA x1

pannello Porta DVI-D x1

posteriore Porta LAN x1

Porta USB x4

Connettore audio x3

Dimension 233 mm (larghezza) x 244 mm

i scheda (altezza)

Sistemi Biostar si riserva il diritto di aggiungere o

operativi Windows XP / Vista / 7 rimuovere il supporto di qualsiasi sistema

supportati operativo senza preavviso.

50
 TA785G3+

SPANISH
Especificación

Conector AM3 La arquitectura AMD 64 permite el procesado de 32 y

CPU Procesadores AMD Sempron / Phenom II / 64 bits

Athlon II Soporta las tecnologías Hyper Transport 3.0

Admite HyperTransport 3.0 con un ancho

FSB
de banda de hasta 5.2 GT/s

Conjunto de AMD 785G

chips AMD SB710

ITE 8718F Iniciativas de control de entorno,

Le ofrece las funcionalidades heredadas de Monitor hardware

Súper E/S
uso más común Súper E/S. Controlador de velocidad de ventilador

Interfaz de cuenta Low Pin Función "Guardia inteligente" de ITE

Ranuras DIMM DDR3 x 4

Módulo de memoria DDR3 de canal Doble
Memoria Capacidad máxima de memoria de 16GB
Admite DDR3 de 800 / 1066 / 1333
principal Cada DIMM admite DDR de
Admite DDR3 de 1600 (OC)
512MB/1GB/2GB/4GB

Memoria máxima de vídeo compartida de 512 MB

Gráficos AMD 785G (Radeon HD4200)
Admite DVI/UVD/HDCP

Modo bus maestro Ultra DMA 33 / 66 / 100 / 133

IDE AMD SB710
Soporte los Modos PIO 0~4,

Tasas de transferencia de hasta 3 Gb/s.

SATA II AMD SB710 Compatible con la versión SATA 2.0.

Admite RAID 0,1,10

Negociación de 10 / 100 / 1000 Mb/s

Red Local Realtek RTL 8111DL
Funciones Half / Full dúplex

Códecs de Salida de sonido de 5.1 canales

ALC662
sonido Soporte de sonido de Alta Definición

Ranura PCI X2
Ranuras
Ranura PCI express Gen2 x16 X1

51
Motherboard Manual
Especificación

Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Conector IDE X1 Cada conector soporta 2 dispositivos IDE

Conector SATA X6 Cada conector soporta 1 dispositivos SATA

Conector de panel frontal X1 Soporta instalaciones en el panel frontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Conector de salida S/PDIF X1 Soporta función de salida de sonido digital

Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con

Conectores función Smart Fan)

en placa Cabecera de ventilador de sistema X2 Fuente de alimentación de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB X3 Cada conector soporta 2 puertos USB frontales

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Puerto serie X1

Conector de alimentación X1

(24 patillas)

Conector de alimentación X1

(4 patillas)

Teclado PS/2 X1

Ratón PS/2 X1

Panel Puerto VGA X1

trasero de Puerto DVI-D X1

E/S
Puerto de red local X1

Puerto USB X4

Conector de sonido X3

Tamaño de
233 mm. (A) X 244 mm. (H)
la placa

Soporte de
Biostar se reserva el derecho de añadir o retirar el
sistema Windows XP / Vista / 7
soporte de cualquier SO con o sin aviso previo.
operativo

52
 TA785G3+

PORTUGUESE
ESPECIFICAÇÕES

Socket AM3 A arquitectura AMD 64 permite uma computação de 32

CPU Processadores AMD Sempron / Phenom II e 64 bits

/ Athlon II Suporta as tecnologias Hyper Transport 3.0

Suporta a tecnologia HyperTransport 3.0

FSB
com uma largura de banda até 5.2 GT/s

AMD 785G
Chipset
AMD SB710

ITE 8718F
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais
Especificaçã Monitorização do hardware
utilizadas em termos da especificação
o Super I/O Controlador da velocidade da ventoinha
Super I/O.
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).

Ranhuras DIMM DDR3 x 4

Módulo de memória DDR3 de canal duplo
Memória Capacidade máxima de memória: 16 GB
Suporta módulos DDR3 800 / 1066 / 1333
principal Cada módulo DIMM suporta uma
Suporta módulos DDR3 1600 (OC)
memória DDR3 de 512MB/ 1GB/2GB/4GB

Placa Memória de vídeo máxima partilhada: 512 MB

AMD 785G (Radeon HD4200)
gráfica Suporta as funções DVI/UVD/HDCP

Modo Bus master Ultra DMA 33 / 66 / 100 / 133

IDE AMD SB710
Suporta o modo PIO 0~4,

Velocidades de transmissão de dados até 3 Gb/s.

SATA II AMD SB710 Compatibilidade com a especificação SATA versão 2.0.

Suporta as funções RAID 0,1,10

Auto negociação de 10 / 100 / 1000 Mb/s

LAN Realtek RTL 8111DL
Capacidade semi/full-duplex

Codec de Saída de áudio de 5.1 canais

ALC662
som Suporta a especificação High-Definition Audio

Ranhura PCI x2
Ranhuras
Ranhura PCI Express Gen2 x16 x1

53
Motherboard Manual
ESPECIFICAÇÕES

Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de disquetes

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Conector IDE x1 Cada conector suporta 2 dispositivos IDE

Conector SATA x6 Cada conector suporta 1 dispositivo SATA

Conector do painel frontal x1 Para suporte de várias funções no painel frontal

Conector de áudio frontal x1 Suporta a função de áudio no painel frontal

Conector de saída S/PDIF x1 Suporta a saída de áudio digital

Alimentação da ventoinha da CPU (com a função Smart

Conector da ventoinha da CPU x1
Conectores Fan)

na placa Conector da ventoinha do sistema x2 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Conector USB x3 Cada conector suporta 2 portas USB no painel frontal

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Porta série x1

Conector de alimentação x1

(24 pinos)

Conector de alimentação x1

(4 pinos)

Teclado PS/2 x1

Rato PS/2 x1
Entradas/S
Porta VGA x1
aídas no
Porta DVI-D x1
painel

traseiro Porta LAN x1

Porta USB x4

Tomada de áudio x3

Tamanho
233 mm (L) X 244 mm (A)
da placa

Sistemas A Biostar reserva-se o direito de adicionar ou remover

operativos Windows XP / Vista / 7 suporte para qualquer sistema operativo com ou sem
suportados
aviso prévio.

54
 TA785G3+

POLISH
SPEC

Architektura AMD 64 umożliwia przetwarzanie

Socket AM3
Procesor 32 i 64 bitowe
AMD Sempron / Phenom II / Athlon II Procesory
Obsługa Hyper Transport 3.0

Obsługa HyperTransport 3.0 o szerokości pasma

FSB
do 5.2 GT/s

AMD 785G
Chipset
AMD SB710

Gniazda DDR3 DIMM x 4 Moduł pamięci DDR3 z trybem podwójnego

Pamięć Maks. wielkość pamięci 16GB kanału

główna Każde gniazdo DIMM obsługuje moduły Obsługa DDR3 800 / 1066 / 1333

512MB/1GB/2GB/4GB DDR3 Obsługa DDR3 1600 (OC)

Maks. wielkość współdzielonej pamięci video

Grafika AMD 785G (Radeon HD4200) wynosi 512 MB

Obsługa DVI/UVD/HDCP

ITE 8718F Funkcje kontroli warunków pracy,

Zapewnia najbardziej powszechne funkcje Super Monitor H/W

Super I/O
I/O. Kontroler prędkości wentylatora

Interfejs Low Pin Count Funkcja ITE "Smart Guardian"

Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master

IDE AMD SB710
obsługa PIO tryb 0~4,

Transfer danych do 3 Gb/s.

SATA II AMD SB710 Zgodność ze specyfikacją SATA w wersji 2.0.

Obsługa RAID 0,1,10

10 / 100 / 1000 Mb/s z automatyczną negocjacją

szybkości
LAN Realtek RTL 8111DL
Działanie w trybie połowicznego/pełnego

dupleksu

Kodek 5.1 kanałowe wyjście audio

ALC662
dźwiękowy Obsługa High-Definition Audio

Gniazdo PCI x2
Gniazda
Gniazdo PCI Express Gen2 x16 x1

55
Motherboard Manual
SPEC

Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek

Złącze Port drukarki x1 Każde złącze obsługuje 1 Port drukarki

Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE

Złącze SATA x6 Każde złącze obsługuje 1 urządzenie SATA

Złącze panela przedniego x1 Obsługa elementów panela przedniego

Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim

Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia audio

Złącze główkowe wentylatora Zasilanie wentylatora procesora (z funkcją Smart

Złącza procesora x1 Fan)

wbudowane Złącze główkowe wentylatora systemowego x2 Zasilanie wentylatora systemowego

Złącze główkowe kasowania

CMOS x1

Każde złącze obsługuje 2 porty USB na panelu

Złącze USB x3
przednim

Złącze Port drukarki x1 Każde złącze obsługuje 1 Port drukarki

Port szeregowy x1

Złącze zasilania (24 pinowe) x1

Złącze zasilania (4 pinowe) x1

Klawiatura PS/2 x1

Mysz PS/2 x1

Port VGA x1
Back Panel
Port DVI-D x1
I/O
Port LAN x1

Port USB x4

Gniazdo audio x3
Wymiary
233 mm (S) X 244 mm (W)
płyty
Obsluga
Biostar zastrzega sobie prawo dodawania lub
systemu
Windows XP / Vista / 7 odwoływania obsługi dowolnego systemu
operacyjne
operacyjnego bez powiadomienia.
go

56
 TA785G3+

RUSSIAN
СПЕЦ
CPU
Гнездо AM3 Архитектура AMD 64 разрешать обработка
(центральн
Процессоры AMD Sempron / Phenom II / данных на 32 и 64 бит
ый
Athlon II Поддержка Hyper Transport 3.0
процессор)

Поддержка HyperTransport 3.0 с

FSB
пропускной способностью до 5.2 GT/s

Набор AMD 785G

микросхем AMD SB710

Слоты DDR3 DIMM x 4

Модуль памяти с двухканальным режимом DDR3
Основная Максимальная ёмкость памяти 16 ГБ
Поддержка DDR3 800 / 1066 / 1333
память Каждый модуль DIMM поддерживает
Поддержка DDR3 1600 (OC)
512МБ/1ГБ/2ГБ/4ГБ DDR3

Максимальная совместно используемая видео

Графика AMD 785G (Radeon HD4200) память составляет 512 МБ

Поддержка DVI/UVD/HDCP

ITE 8718F Инициативы по охране окружающей среды,

Обеспечивает наиболее используемые Аппаратный монитор

Super I/O действующие функциональные Регулятор скорости

возможности Super I/O. Функция ITE "Smart Guardian"

Интерфейс с низким количеством выводов (Интеллектуальная защита)

Режим "хозяина" шины Ultra DMA 33 / 66 / 100 /

IDE AMD SB710 133

Поддержка режима PIO 0~4,

скорость передачи данных до 3 гигабит/с.

SATA II AMD SB710 Соответствие спецификации SATA версия 2.0.

Поддержка RAID 0,1,10

Автоматическое согласование 10 / 100 / 1000

Локальная
Realtek RTL 8111DL Мб/с
сеть
Частичная / полная дуплексная способность

Звуковой Звуковая поддержка High-Definition

ALC662
кодек 5.1канальный звуковой выход

Слот PCI x2
Слоты
Слот PCI Express Gen2 x16 x1

57
Motherboard Manual
СПЕЦ
Каждый разъём поддерживает 2 накопителя на
Разъём НГМД x1
гибких магнитных дисках
Разъём Порт подключения Каждый разъём поддерживает 1 Порт
принтера x1 подключения принтера
Каждый разъём поддерживает 2 встроенных
Разъём IDE x1
интерфейса накопителей
Разъём SATA x6 Каждый разъём поддерживает 1 устройство SATA
Разъём на лицевой панели x1 Поддержка устройств на лицевой панели
Поддержка звуковых функций на лицевой
Входной звуковой разъём x1
панели
Разъём вывода для S/PDIF x1 Поддержка вывода цифровой звуковой функции
Источник питания для вентилятора центрального
Встроенны Контактирующее приспособление
процессора (с функцией интеллектуального
й разъём вентилятора центрального процессора x1
вентилятора)
Контактирующее приспособление
Источник питания для вентилятора системы
вентилятора системы x2
Открытое контактирующее
приспособление CMOS x1
Каждый разъём поддерживает 2 USB-порта на
USB-разъём x3
лицевой панели

Разъём Порт подключения Каждый разъём поддерживает 1 Порт

принтера x1 подключения принтера

Последовательный порт x1
Разъем питания (24 вывод) x1
Разъем питания (4 вывод) x1
Клавиатура PS/2 x1
Мышь PS/2 x1
Задняя
Порт VGA x1
панель
Порт DVI-D x1
средств
Порт LAN x1
ввода-выв
USB-порт x4
ода
Гнездо для подключения
наушников x3
Размер
233 мм (Ш) X 244 мм (В)
панели
Biostar сохраняет за собой право добавлять или
Поддержка
Windows XP / Vista / 7 удалять средства обеспечения для OS с или без
OS
предварительного уведомления.

58
 ‫‪TA785G3+‬‬

‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬ ‫‪AM3‬ﻡﻘﺒﺲ‬ ‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬

‫و ‪Hyper Transport3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬ ‫‪AMD Sempron / Phenom II / Athlon II‬ﻡﻌﺎﻟﺠﺎت‬ ‫اﻟﻤﺮآﺰﻳﺔ‬

‫‪ 5.2 GT/s‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬ ‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ‬

‫‪AMD 785G‬‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪AMD SB710‬‬

‫ﻋﺪد‪4‬‬ ‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬

‫ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 16‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﺳﻌﺎت ‪ 1333 / 1066 / 800‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪DDR3‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬ ‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺳﻌﺎت ‪ 1600‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ)‪DDR3(OC‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫و‪ /1‬و‪ /2‬و‪ 4‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬

‫ﻣﻴﺠﺎ ﺑﺎﻳﺖ‪512‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬

‫)‪AMD 785G (Radeon HD4200‬‬ ‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻣﺎت‬
‫‪HDCP/UVD/DVI‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬

‫‪ITE 8718F‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬ ‫‪Super I/O‬‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬

‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬

‫وﺿﻊ رﺋﻴﺴﻲ‬ ‫‪AMD SB710‬‬ ‫ﻡﻨﻔﺬ ‪IDE‬‬

‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬

‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬

‫‪ 2.0.‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬ ‫‪AMD SB710‬‬ ‫‪SATA II‬‬

‫‪RAID 0,1,10‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬

‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺛﺎﻧﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺛﺎﻧﻴﺔ‬

‫‪Realtek RTL 8111DL‬‬ ‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫إﻣﻜﺎﻧﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬

‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬

‫‪ALC662‬‬ ‫آﻮدﻳﻚ اﻟﺼﻮت‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬

‫ﻋﺪ‪2‬‬ ‫ﻓﺘﺤﺔ ‪PCI‬‬

‫اﻟﻔﺘﺤﺎت‬
‫ﻋﺪد ‪1‬‬ ‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬

‫‪59‬‬
‫‪Motherboard Manual‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬

‫ﻳﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬

‫‪IDE‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺝﻬﺰة‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ‪IDE‬‬

‫‪SATA‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة‬ ‫ﻋﺪد‪6‬‬ ‫ﻡﻨﻔﺬ ‪SATA‬‬

‫ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬

‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬ ‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬ ‫ﻋﺪد ‪1‬‬ ‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫اﻟﻠﻮﺣﺔ‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬ ‫ﻋﺪ‪2‬‬ ‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬

‫ﻋﺪد ‪1‬‬ ‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬

‫ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‪USB‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ‬ ‫ﻋﺪد ‪3‬‬ ‫ﻡﻨﻔﺬ ‪USB‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬

‫ﻋﺪد‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺏﺎﺏﻴﺲ(‬

‫ﻋﺪد ‪1‬‬ ‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﺎوس ‪PS/2‬‬

‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﺎﻓﺬ ‪VGA‬‬

‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫ﻋﺪد ‪1‬‬ ‫ﻡﻨﺎﻓﺬ ‪DVI-D‬‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﻋﺪ‪1‬‬ ‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬

‫ﻋﺪد ‪4‬‬ ‫ﻡﻨﺎﻓﺬ ‪USB‬‬

‫ﻋﺪد ‪3‬‬ ‫ﻡﻘﺒﺲ ﺹﻮت‬

‫‪ 233‬ﻡﻢ )ﻋﺮض( ‪ 244 X‬ﻡﻢ )ارﺗﻔﺎع(‬ ‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬

‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ‪Biostar‬ﺗﺤﺘﻔﻆ‬

‫‪Windows XP / Vista / 7‬‬ ‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬

‫‪60‬‬
 TA785G3+

JAPANESE
仕様

Socket AM3 AMD 64アーキテクチャでは、32ビットと64ビット計算が

CPU AMD Sempron / Phenom II / Athlon II プロセ 可能です

ッサ ハイパートランスポート3.0サポートします

5.2 GT/sのバンド幅までハイパートランスポート
FSB
3.0をサポートします

AMD 785G
チップセット
AMD SB710

DDR3 DIMMスロット x 4
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量16GB
メインメモリ DDR3 800 / 1066 / 1333 をサポート
各DIMMは 512MB/1GB/2GB/4GB DDR3をサ
DDR3 1600 をサポート (OC)
ポート

グラフィック 最大の共有ビデオメモリは512MBです
AMD 785G (Radeon HD4200)
ス DVI/UVD/HDCP のサポート

ITE 8718F 環境コントロールイニシアチブ、

もっとも一般に使用されるレガシーSuper I/O機 H/Wモニター

Super I/O
能を採用しています。 ファン速度コントローラ/ モニター

低ピンカウントインターフェイス ITEの「スマートガーディアン」機能

Ultra DMA 33 / 66 / 100 / 133バスマスタモード

IDE AMD SB710
PIO Mode 0~4のサポート、

最高3 Gb/秒のデータ転送速度

SATA II AMD SB710 SATAバージョン2.0仕様に準拠。

RAID 0,1,10のサポート

10 / 100 / 1000 Mb/秒のオートネゴシエーション

LAN Realtek RTL 8111DL
半/全二重機能

サウンド ハイデフィニションオーディオのサポート
ALC662
Codec 5.1 チャンネルオーディオアウト

PCIスロット x2
スロット
PCI Express Gen2 x16スロット x1

61
Motherboard Manual
仕様

フロッピーコネクタ x1 各コネクタは2つのフロッピードライブをサポートします

プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします

IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします

SATAコネクタ x6 各コネクタは1つのSATAデバイスをサポートします

フロントパネルコネクタ x1 フロントパネル機能をサポートします

フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします

S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします

オンボードコ CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載)

ネクタ システムファンヘッダ x2 システムファン電源装置

CMOSクリアヘッダ x1

各コネクタは2つのフロントパネルUSBポートをサポート
USBコネクタ x3
します

プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします

シリアルポート x1

電源コネクタ(24ピン) x1

電源コネクタ(4ピン) x1

PS/2キーボード x1

PS/2マウス x1

VGAポート x1
背面パネル
DVI-Dポート x1
I/O
LANポート x1

USBポート x4

オーディオジャック x3

ボードサイズ 233 mm (幅) X 244 mm (高さ)

Biostarは事前のサポートなしにOSサポートを追加または
OSサポート Windows XP / Vista / 7
削除する権利を留保します。

2009/11/27

62