China Shanghai Saixin Electric and Optical Cables Co.

, Ltd
No 1000, Jungong Road,Shanghai City,PRC [email protected]
Tel:+86-21-65504226 Fax:+86-21-65488035

1. OPGW Cable Specifications

2014/7/29

Cross Section: Aluminum clad steel wire

Aluminum clad steel wire
Optical fiber and Jelly
Stainless steel tube

Material No Material No. Material Dia.

Fiber G.652D 72 G.655 0
center 40%ASwire 1 Diameter 2.70 mm
Structure Layer1 40%ASwire 3 6201 AA wire 0 Diameter 2.50 mm
SST 3 Fibers(all tube) 72 Diameter 2.60 mm
Layer2 40%ASwire 10 6201 AA wire 0 Diameter 3.35 mm

according to IEC60794-4, IEEE1138, IEC60793,ITU G.65X series,IEC61232,IEC60104

standards
Stranded:the core without grease coating
stranding direction of outer layer is Right hand(Z-stranding)
Cable Diameter 14.60 mm
Cable Weight 570 kg/km
Supporting Cross Section 109.8 mm2
Section of AS Wire 109.80 mm2
Section of AA Wire 0.00 mm2
Section of Al-SST 0.00 mm2
Calculated Breaking load(CBL) 74.6 kN
Rate Tensile Strength (RTS) 70.9 kN
Technical Data Modulus of Elasticity (E-Modulus) 109.0 kN/mm2
Thermal Elongation Coefficient 15.5 ×10-6/℃
Permissible Maximum Working Stress (50% RTS) 322.9 N/mm2
Everyday Stress（EDS) (15%~20% RTS) 96.9 ~ 129.1 N/mm2
Ultimate Exceptional Stress (70% RTS) 452.0 N/mm2
DC Resistance(At 20℃) 0.662 Ω/km
Short Time Current (0.25s, 40℃~200℃) 20.3 kA
Short Time Current Capacity I2t 102.7 kA2S
Minimum Bending Radiu Installation： 365 mm
Oprating： 292 mm
Ratio between Pull and Weight 12.7 km
Temperature Installation -10℃ ~ +50 ℃
Range: Transportation and Operation -40℃ ~ +80 ℃
Remarks: All Sizes and Values are Nominal Values
 China Shanghai Saixin Electric and Optical Cables Co., Ltd
No 1000, Jungong Road,Shanghai City,PRC [email protected]
Tel:+86-21-65504226 Fax:+86-21-65488035

2. Optical Fiber Technical Data

Category Description Specifications

Type ITU-T G.652D Single-mode
Attenuation Coefficient
at 1310 nm ≤ 0.35 dB/km
at 1550 nm ≤ 0.22 dB/km
Chromatic Dispersion
at 1310 nm ≤ 3.5 ps/nm∙km
Optical at 1550 nm ≤ 18 ps/nm∙km
Characteristics Attenuation Non-uniformity ≤ 0.05dB
Point Discontinuity ≤ 0.05dB
Zero Dispersion Wavelength 1300~1324nm
Zero Dispersion Slope ≤ 0.092 ps/nm2∙km
Polarization Mode Dispersion (PMD) ≤ 0.2 ps/√km
Cable Cutoff Wavelength (λcc) ≤ 1260 nm
Mode Field Diameter
at 1310 nm 9.2 ± 0.4μm
at 1550 nm 10.4 ± 0.8μm
Cladding Diameter 125 ± 0.7μm
Mechanical
Mode field (Core/clad) concentricity error ≤ 0.5 μm
characteristics
Cladding Non-Circularity ≤1.0%
Coating Diameter 245 ± 5μm
Coating / Cladding Concentricity error ≤ 6μm
Exceed length of Optical fiber than Cable 5.0‰ ~ 6.0‰
Coating Non-Circularity ≤ 6.0%
Environmental Temperature Cycling Induced Attenuation: ≤ 0.1 dB/km
Characteristics Macro bending Loss : ≤ 0.05 dB
Water Immersion: 23ºC 5ºC, 30 days at 1550 nm ≤ 0.05dB/km
Colour Code identification
The fibres shall be marked by a coloured coating with 12 different colours according to EIA/TIA 598:
Fibre #1: Blue Fibre #7: Red
Fibre #2: Orange Fibre #8: Black (natural with being marked )
Fibre #3: Green Fibre #9: Yellow
Fibre #4: Brown Fibre #10: Violet
Fibre #5: Slate (Grey) Fibre #11: Rose (Pink)
Fibre #6: White Fibre #12: Aqua (Light Blue)
Optical Fiber Unit Group
Each bundle will be marked using black Rings.
First Stainless steel tube
Fibre #1~#12: no marking
Fibre #13~#24: be marked with singel black bands(S60) with a character space 60mm.
Second Stainless steel tube
Fibre #25~#36: no marking
Fibre #37~#48: be marked with double black bands(D80) with a character space 80mm.
Third Stainless steel tube
Fibre #49~#60: be marked with singel black bands(S60) with a character space 60mm.
Fibre #61~#72: be marked with double black bands(D80) with a character space 80mm.
 China Shanghai Saixin Electric and Optical Cables Co., Ltd
No 1000, Jungong Road,Shanghai City,PRC [email protected]
Tel:+86-21-65504226 Fax:+86-21-65488035

3. Inn and Out layer stranded wire specification

Code Item Unti Value

1 Wire standard - type / IEC 61232-type 40SA-A
2 Nominal Diameter mm 2.60 2.70/3.35
3 Diameter Tolerance mm ±0.04 ±1.5%
4 Min. Tensile Strength Mpa 680 680
5 Min. Elongation on 250mm (10in) % 1.5 1.5
6 Min. Conductivity at 20°C %IACS 40 40
7 Min. Thickness of Aluminum mm 0.325 0.337/0.418
8 Min. Number of Twist on 100 x dia. No 20 20
 China Shanghai Saixin Electric and Optical Cables Co., Ltd
No 1000, Jungong Road,Shanghai City,PRC [email protected]
Tel:+86-21-65504226 Fax:+86-21-65488035

4 . Packing and Drum

OPGW shall be wound round a non-returnable wooden drum or iron-wooden drum. Both ends of OPGW shall
be securely fastened to drum and sealed with a shrinkable cap. The required marking shall be printed with a
weatherproof material on the outsides of drum according to customer’s requirement

Drum Dimensions & Weights

Cable Diameter Drum
“F” Flange “B” Barrel "T" Traverse "O" Overall Spindle Hole Weight
(mm) Length (m)
mm mm mm mm mm kg
3000 1400 800 900 1100 110 200
4000 1500 800 900 1100 110 220
13.2
5000 1600 800 900 1100 110 260

Or

composite Steel-wood drum Lable of drum