0% found this document useful (0 votes)
454 views2 pages

Lab 2

ADC is a device that convert an analog signal to digital number. ADC0804 successive approximation a / D converters that use a differential potentiometric ladder--similar to the 256R products. At the output of ADC the digital signal will seperatelly and indicated by the LED bar.

Uploaded by

Iqbal Jafar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
454 views2 pages

Lab 2

ADC is a device that convert an analog signal to digital number. ADC0804 successive approximation a / D converters that use a differential potentiometric ladder--similar to the 256R products. At the output of ADC the digital signal will seperatelly and indicated by the LED bar.

Uploaded by

Iqbal Jafar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Analog to digital conversion | BFF3202

Sensor and Instrumentation | BFF3202

3.0 List of component


Component ADC0804 Led 10 bar red Resistor 470 Resistor 10k Capasitor 150pF Switch Quantity 1 1 8 1 1 1

Title: ADC using ADC0804


Group members: 1. Muhammad Iqbal Bin Jafar FB09035 2. Muhammad Halifi Bin Muhamad FB09037 Lecturer: En Khairul Fikri Muhamad

1.0 Learning Outcome


1.1 To design an ADC circuit using ADC0804. 1.2 To setup an ADC circuit using ADC0804 and able analyze the circuit.

4.0 Circuit analysis

diagram

and

4.1 Circuit diagram

2.0 Background Knowledge


ADC is a device that convert an analog signal to digital number. ADC is stand for analog to digital converter. The ADC0804 successive approximation A/D converters that use a differential potentiometric laddersimilar to the 256R products. These converters are designed to allow operation with the NSC800 and INS8080A derivative control bus with TRI-STATE output latches directly driving the data bus. These A/Ds appear like memory locations or I/O ports to the microprocessor and no interfacing logic is needed. Differential analog voltage inputs allow increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.

Figure 1.0: Original design

5V AC

5V DC

GND

Figure 2.0: Circuit Diagram

Figure 3.0: Result


Lab #2 Page 1

Analog to digital conversion | BFF3202

4.2 Analysis When the switch is on, the AC will enter the input of ADC0804 and convert the analog signal to digital. At the output of ADC the digital signal will seperatelly and indicated by the LED bar.

6.3 This circuit also can be used as light controller at theatre or somewhere like hall. In a conclusion, the objective of this experiment was achieved. 6.4 ADC0804 can chance analog signal to digital signal.

5.0 Procedure
5.1 Plan and survey on the title of the laboratory project. 5.2 Search for appropriate circuit diagram related to the topic of the laboratory project. 5.3 Analyze and study the circuit thoroughly in order to get a better understanding from the circuit. 5.4 The potentiometer as in original design replaced with AC supply for better analog signal. 5.5 Switch was on, an analog signal will flow and convert to digital signal and the result the LED bar will be as chasing LED.

7.0 References
http://www.national.com/mpf/DC/ ADC/ADC0804.html#Parametrics http://www.ece.rochester.edu/cours es/ECE216/ADC0804LCN.pdf

6.0 Learning Summary


6.1 The differential analog voltage input allows for increased common-mode rejection and provides a means to adjust the zero-scale offset. 6.2 Additionally, the voltage reference input provides a means of means of encoding small analog voltages to the full 8 bits of resolution. The application of ADC0804 is in digital thermometer, microprocessor-based monitoring and control system.
Lab #2 Page 2

You might also like