Microcontrollers for

Advanced Lighting Solutions

TI’s MCU lighting solutions give designers efficient, flexible and

scalable intelligent lighting management and control
Intelligent lighting is the ability to reduce the unique characteristics of LEDs and other time. A digital approach also allows many
amount of light and/or energy used so that light sources to develop efficient, scalable hardware features, such as soft startup, delay
only the right amount of light is delivered and flexible designs for intelligent lighting. and PWM phase shifting, to be implemented
exactly where it is needed. Digitally controlled With digital control, designers can scale and in software, eliminating extra components,
lighting using microcontrollers (MCUs) easily adjust designs to multiple applications, cost and complexity. TI’s communications
allows developers to take advantage of the maximizing reuse and decreasing design and control solutions are for both wired and
wireless systems supporting a wide selection of
Solution/Protocol Product Tool/Kit For more info communication standards.
DALI MSP430™ MCU/ TPS62660 LED-338 EVM www.ti.com/daliappnote
Piccolo™ TMDSIACLEDCOMKIT Texas Instruments offers a broad suite of
(C2000™ MCU) microcontroller solutions for your LED and
DMX512 MSP430 MCU/ DMX512 apps note MSP430 – Demo code and other lighting design and control needs as well
Stellaris®/ Third-party design reference design is available
Piccolo (C2000 TMDSIACLEDCOMKIT upon request at www.ti.com/ as demonstration platforms and development
MCU) technicalsupport;
Stellaris – Available through kits. The table to the left is a sample of what is
third-party Golden IC available now. For more information on these
Technology Co., Ltd.
[email protected] and new products throughout the year, visit
Power line C2000 MCUs TMDSPLCKIT-V3 www.ti.com/plc www.ti.com/mculighting.
communication TMDSIACLEDCOMKIT
ZigBee® / 802.15.4 MSP430F54xxA MSP430F5438 Experimenter’s Board www.ti.com/msp430f5438
6LoWPAN CC430 Third-party design Available through third-party Key benefits
(MSP430 MCU + Sensinode,
Low-Power RF) www.sensinode.com/EN/ • Support for industry-standard communi-
contact cations: Power line communications (PLC),
Digital power Piccolo TMDSDCDCLEDKIT www.ti.com/led_devkit DALI, DMX512, ZigBee®, 6LoWPAN, and
(C2000 MCU) TMDSRGBLEDKIT www.ti.com/rgb_led
TMDSIACLEDCOMKIT www.ti.com/tool/ many others
tmdsiacledcomkit
• Design flexibility and scalability for maximum
Digital signal control Stellaris LM4F Evaluation kit with up to 40 PWM www.ti.com/cortexm4f
(with many PWMs) outputs reuse of designs and cost management
Control, sensing and MSP430 MCU Development and evaluation kits www.ti.com/msp430 • High-efficiency control of LEDs and other
dimming solutions
light sources
• Intelligent lighting management enables
Create intelligent lighting products with Piccolo MCUs: smarter light fixtures to handle lumen
• Independent dimming of 6 LED strings • Intelligent MCU control of power stage, maintenance to improve reliability and
• Communications support including: lighting, and communications lifetime of LEDs
DALI, DMX512, and Power Line • Full AC mains-powered reference design • Power supply integration through digital
Communications (PLC) power for an adaptable, full-system design
with fewer components
Piccolo AC LED Lighting & Communications Kit • Accelerated development with extensive
TMDSIACLEDCOMKIT
array of evaluation tools and kits
MCU Advanced Lighting: Multi-String LED Driver

Digital control of LEDs using MCUs allows developers to take full advantage of the unique characteristics of LEDs. TI’s C2000™ and Piccolo™ real-time MCUs can
perform all power management functions needed in a lighting product, giving flexibility for regional products or quick design spins. MCUs have a low-cost adder for
additional LED strings, a high-dimming ratio of greater than 20,0000:1 and a high PWM-dimming frequency of >100KHz. Digital communications can be achieved via
wired or wireless communications through a number of different communication standards including 6LoWPAN and power line communications. TI offers microcon-
troller solutions for all your LED lighting design and control needs, including demonstration platforms and development kits. Visit www.ti.com/led for more information.

TI Worldwide Technical Support

Internet Asia
Phone
TI Semiconductor Product Information Center Home Page International +91-80-41381665
support.ti.com Domestic Toll-Free Number
TI E2E™ Community Home Page Note: Toll-free numbers do not support
e2e.ti.com mobile and IP phones.
Australia 1-800-999-084
China 800-820-8682
Product Information Centers Hong Kong 800-96-5941
Americas Phone +1(972) 644-5580 India 1-800-425-7888
Brazil Phone 0800-891-2616 Indonesia 001-803-8861-1006
Korea 080-551-2804
Mexico Phone 0800-670-7544 Malaysia 1-800-80-3973
Fax +1(972) 927-6377 New Zealand 0800-446-934
Internet/Email support.ti.com/sc/pic/americas.htm Philippines 1-800-765-7404
Singapore 800-886-1028
Europe, Middle East, and Africa Taiwan 0800-006800
Phone Thailand 001-800-886-0010
European Free Call 00800-ASK-TEXAS Fax +8621-23073686
(00800 275 83927) Email [email protected] or [email protected]
International +49 (0) 8161 80 2121 Internet support.ti.com/sc/pic/asia.htm
Russian Support +7 (4) 95 98 10 701
Note: The European Free Call (Toll Free) number is not active in all countries. Important Notice: The products and services of Texas Instruments
Incorporated and its subsidiaries described herein are sold subject to TI’s
If you have technical difficulty calling the free call number, please use the standard terms and conditions of sale. Customers are advised to obtain
international number above. the most current and complete information about TI products and services
Fax +(49) (0) 8161 80 2045 before placing orders. TI assumes no liability for applications assistance,
Internet www.ti.com/asktexas customer’s applications or product designs, software performance, or
Direct Email [email protected] infringement of patents. The publication of information regarding any
other company’s products or services does not constitute TI’s approval,
Japan warranty or endorsement thereof.
Phone Domestic 0120-92-3326
Fax International +81-3-3344-5317 B011012
Domestic 0120-81-0036 The platform bar, E2E, C2000, MSP430 and Piccolo are trademarks and
Internet/Email International support.ti.com/sc/pic/japan.htm Stellaris is a registered trademark of Texas Instruments.
Domestic www.tij.co.jp/pic All other trademarks are the property of their respective owners.

© 2012 Texas Instruments Incorporated

Printed in U.S.A. by (Printer, City, State) SLAT125B
 IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated