Zid P798

Kenan Kajosevic

Slope stability analysis

Input data
Project
Settings
Standard - EN 1997 - DA1
Stability analysis
Verification methodology : according to EN 1997
Design approach : 1 - reduction of actions and soil parameters
Partial factors on actions (A)
Permanent design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : gG = 1.35 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : gQ = 1.50 [–] 0.00 [–] 1.30 [–] 0.00 [–]
Water load : gw = 1.35 [–] 1.00 [–]

Partial factors for soil parameters (M)

Permanent design situation
Combination 1 Combination 2
Partial factor on internal friction : gf = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : gc = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : gcu = 1.00 [–] 1.40 [–]
Interface
Coordinates of interface points [m]
No. Interface location
x z x z x z
-11.00 -4.40 -1.28 -4.40 -1.28 -3.55
-0.78 -3.55 -0.50 0.00 0.00 0.00
13.20 0.00
1

0.00 0.00 0.00 -3.55 2.10 -3.55

2.10 -4.40 13.20 -4.40

-1.28 -4.40 2.10 -4.40

1
[GeoStructural Analysis - Cantilever Wall | version 5.16.13.0 | Copyright © 2013 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
 Zid P798
Kenan Kajosevic

Soil parameters - effective stress state

jef cef g
No. Name Pattern
[°] [kPa] [kN/m3]

1 1b 33.00 30.00 25.00

2 tlo u nasipu 30.00 0.00 19.00

Soil parameters - uplift

gsat gs n
No. Name Pattern
[kN/m3] [kN/m3] [–]

1 1b 25.00

2 tlo u nasipu 25.00

Soil parameters
1b
Unit weight : g = 25.00 kN/m3
Stress-state : effective
Angle of internal friction : jef = 33.00 °
Cohesion of soil : cef = 30.00 kPa
Saturated unit weight : gsat = 25.00 kN/m3

tlo u nasipu
Unit weight : g = 19.00 kN/m3
Stress-state : effective
Angle of internal friction : jef = 30.00 °
Cohesion of soil : cef = 0.00 kPa
Saturated unit weight : gsat = 25.00 kN/m3

Rigid bodies
g
No. Name Sample
[kN/m3]

1 Wall material 23.56

2
[GeoStructural Analysis - Cantilever Wall | version 5.16.13.0 | Copyright © 2013 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
 Zid P798
Kenan Kajosevic

Assigning and surfaces

Coordinates of surface points [m] Assigned
No. Surface position
x z x z soil
2.10 -4.40 2.10 -3.55
Wall material
0.00 -3.55 0.00 0.00
-0.50 0.00 -0.78 -3.55
1 -1.28 -3.55 -1.28 -4.40

0.00 -3.55 2.10 -3.55

tlo u nasipu
2.10 -4.40 13.20 -4.40
13.20 0.00 0.00 0.00
2

-1.28 -4.40 -11.00 -4.40

1b
-11.00 -9.40 13.20 -9.40
13.20 -4.40 2.10 -4.40
3

Surcharge
Location Origin Length Width Slope Magnitude
No. Type Type of action
z [m] x [m] l [m] b [m] a [°] q, q1, f, F q2 unit
1 strip variable on terrain x = 0.00 l = 13.20 0.00 33.00 kN/m2
Surcharges
No. Name
1 Saobracajno
Water
Water type : No water
Tensile crack
Tensile crack not inputted.
Earthquake
Horizontal seismic coefficient : Kh = 0.04
Vertical seismic coefficient : Kv = 0.00
Settings of the stage of construction
Design situation : permanent
Results (Stage of construction 1)
Analysis 1
Circular slip surface

3
[GeoStructural Analysis - Cantilever Wall | version 5.16.13.0 | Copyright © 2013 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
 Zid P798
Kenan Kajosevic

Slip surface parameters

x= -0.41 [m] a1 = -18.60 [°]
Center : Angles :
z= 3.04 [m] a2 = 67.22 [°]
Radius : R= 7.85 [m]
The slip surface after optimization.
Slope stability verification (Bishop)
Combination 1
Sum of active forces : Fa = 387.89 kN/m
Sum of passive forces : Fp = 735.15 kN/m
Sliding moment : Ma = 3044.96 kNm/m
Resisting moment : Mp = 5770.90 kNm/m
Utilization : 52.8 %
Slope stability ACCEPTABLE
Combination 2
Sum of active forces : Fa = 330.49 kN/m
Sum of passive forces : Fp = 543.72 kN/m
Sliding moment : Ma = 2594.32 kNm/m
Resisting moment : Mp = 4268.20 kNm/m
Utilization : 60.8 %
Slope stability ACCEPTABLE
Optimized slip surface for : Combination 2

Name : Analysis Stage - analysis : 1 - 1

4
[GeoStructural Analysis - Cantilever Wall | version 5.16.13.0 | Copyright © 2013 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]