Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    TDS Usp-Eagle (BF36-62) 62

    Uploaded by

    trabelsi.chaima92
    This technical data sheet describes a 62% unsaturated polyester resin for body filler applications. It provides specifications on non-volatiles content, viscosity, acid value, color, gel time and cure time. It also describes performance, applications, compatibility with pigments and fillers, and storage requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS Usp-Eagle (BF36-62) 62

    Uploaded by

    trabelsi.chaima92
    54 views1 page
    This technical data sheet describes a 62% unsaturated polyester resin for body filler applications. It provides specifications on non-volatiles content, viscosity, acid value, color, gel time and cure time. It also describes performance, applications, compatibility with pigments and fillers, and storage requirements.

    Original Title

    TDS USP-EAGLE(BF36-62)62

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical data sheet describes a 62% unsaturated polyester resin for body filler applications. It provides specifications on non-volatiles content, viscosity, acid value, color, gel time and cure time. It also describes performance, applications, compatibility with pigments and fillers, and storage requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views1 page

    TDS Usp-Eagle (BF36-62) 62

    Uploaded by

    trabelsi.chaima92
    This technical data sheet describes a 62% unsaturated polyester resin for body filler applications. It provides specifications on non-volatiles content, viscosity, acid value, color, gel time and cure time. It also describes performance, applications, compatibility with pigments and fillers, and storage requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TECHNICAL DATA SHEET

    USP-EAGLE(BF36-62)62%
    Hard pre-accelerated unsaturated polyester for body filler
    Delivery form : 62 % in (Styrene)

    Specification:
    Test Standard Unit Method
    Non-volatiles 60-64 % ISO 3251
    Viscosity, 25°C (Gardner-holdt) L-Q - ASTM D1545
    Viscosity, 25°C (Brookfield) 300-400 mPa.s or cP ISO 2555
    Acid value 25 max. mg KOH/g ASTM D1639
    Color 8 max Gardner ASTM D1544
    Gel time 4-6 Minutes
    Cure time 8-12 Minutes Using 2 gm BPO 50% on 100
    grams of resin at 25°C
    Peak Exothermic 110-130 °C

    Performance:
    • Excellent sandability • High hardness
    • Fast drying • Pre-accelerated
    • Good wettability • High reactivity
    Application:
    • Standard car body filler
    • Light weight car body filler
    Pigments & Fillers:
    USP-EAGLE(BF36-62)62% is generally utilized with up to 65% of mixed calcium carbonate & talc fillers of "glass microspheres".
    The grades & relative quantities of these fillers should be selected to provide the required application properties & sand ability
    characteristics. Additionally, grades should be selected that have low iron & other transition metal contents are these can
    adversely affect the shelf life of the finished product
    Compatibility:
    USP-EAGLE(BF36-62)62% is soluble in ketone and to a limited extent, ester and aromatic solvent. However, the use of solvents
    other than styrene is not recommended as they can lead to porosity of the film during curing which will subsequently adversely
    affect the continuity of any applied surface coating
    Storage:
    USP-EAGLE(BF36-62)62% should be stored indoor in the original, unopened and undamaged containers in a dry place at
    storage temperatures between 5°C to 30°C. Exposure to sunlight should be avoided
    Stability:
    Under the above mentioned storage condition the stability of USP-EAGLE(BF36-62)62% will be 6 months ex-work.

    Disclaimer: All recorded specifications, results and data mentioned in this document are based on Eagle Chemicals’ instruments, ingredients and conditions. In case of not using Eagle
    Chemicals’ products as a sole binder in your formulations and/or applications, you should do a ladder series of laboratory tests, to confirm the compatibility with other resins or
    ingredients in your formulation. This data is only recommended as a guideline for testing. This also applies in case we offer an alternative for your current product. If you have
    new/modified applications and/or solutions, it would be enriching to our R&D team if you share it with us.

    Review no:5/2020 Issue date:Jun,2019

    You might also like