MarianusEdo

HP : 085269914670
Email [email protected]

CURRICULUM VITAE

I. PERSONALITY

Name : Marianus Yohanes Edo

Place/ date of birth : Ende, 03 July 1987
Gender : Male
Religion : Catholik
Marital State : Single
Citizen : Indonesian
Addres : Bambu Kuning C37 No.16, Batu Aji, Batam
Phone Number : 085269914670
Email : [email protected]

II. FORMAL EDUCATION

 Elementary school in SDK Wolofeo, Graduated in 1999

 Junior high school in SLTPK Detusoko Graduated in 2002
 Senior high School in SMUK ST. PETER EndeGraduated in 2005
 Manajement in University of University Crhistiany Artha Wacana-Kupang Graduated in
2012
 Welding Inspector in Offshore Technology Institute- Batam
 ASNT MT/PT LEVEL II
 MarianusEdo
HP : 085269914670
Email [email protected]

III. JOB EXPERIENCE

Reason Of
No Company Name Position Project/Location Project Periode
Leaving

PT. RIAU ANDALAN

PT. TIMAS SUPLINDO PULP AND PAPER JAN 4st 2023 –
1 QC INSPECTOR Board Machine#1 Job Completed
ENGINEERING PANGKALAN KERINCI- 22 DEC 2023
RIAU

Eni Mexico Area 1

Development Project

Shaporji Palonji NOV 01st 2020-

PT. ANECAN PT. ANECAN PRATAMA
2 QC INSPCTOR JAYA
Marine/Top Side AUGST 31th Job Completed
PRATAMA JAYA
KABIL 2022
Liza Prosperity Top side

GIMMI FLNG PIPERACK

PT. GRAHA TRISAKTI OCT 10st 2019-

PT. SUMBARTEC JAYA NG08039 / 5,000
3 QC INSPECTOR INDUSTRI /PAXOCEAN Job Completed
LEVINDO HP VSP TUG APR 09st 2020
BATAM

PT. DAYA RADAR NOV 23nd 2018-

PT. HARAPAN UTAMA
4 QC INSPECTOR UTAMA LST AT-7 H395 Finish Contract
INDONESIA APR 1st 2020
UNIT LAMPUNG

5 POWER PLANT 2 X JUN 20nd 2017-

WI & WELDING PT HEPSEC
PT. HEPSEC 100MW CFSPP Job Completed
SPV PALANGKARAYA
PROJECT AUG 10st 2018

PT. SIEMENS BATU E- HOUSE YAMAL JUN 01st 2016-

6 PT. CHERES QC INSPECTOR Finish Contract
AMPAR BATAM LNG ESS-301 SEP 29th 2016

PT. INDIAN OIL

TANK STORAGE FEB 26th2016-
7 PT. SINAR CENDANA QC TANKING TANJUNG Finish Contract
TERMINAL MAY 17nd 2016
BALAI KARIMUN

JACK- UP DRILLING
PT. GRAHA TRISAKA
UNIT MSC CJ46- NOV 1st 2014-
8 PT. SINAR CENDANA QC INDUSTRI TANJUNG Finish Contract
X100-D (L 209 & G Aug 1st 2015
UNCANG BATAM
8001)

PT. ASL SHIPYARD SHIP BUILDING

PT. ASL SHIPYARD Jan 16nd 2014 –
9 QC INSPECTOR INDONESIA TANKER (1000 Job Completed
INDONESIA Oct 15nd 2014
BATAM DWT)

PT. NEXUS
Jan 23th 2013 –
10 PT. DUNIA MARINDO SAFETY ENGINEERIN-KABIL, MV. DIAMANTINA Job Completed
Nov 27th 2013
BATAM
 MarianusEdo
HP : 085269914670
Email [email protected]

IV. SKILLS
 Quality Control : Inspection Before, During, and After Welding
 ASNT (MT/PT LEVEL II) : Inspection and Witness Magnetic Test and Penetrant Test
 Computer : Ms. Office

V. DUTIES & RESPONSIBILITY

 As QC in PT. Timas Suplindo Engineering – BM1 Project Location in PT. Riau

Andalan Pulp And Paper-Pangkalan Kerinci, Periode 04 JANUARY 2023 – NOW
 Perform internal fit up inspection prior to invite official inspection with client.

 Check & monitoring Welder Qualification Test perform

 Check and monitoring Welding Parameter (Voltage, Ampere, Travel Speed, & Heat

Input) refer to WPS.

 Welding Inspection, Documentation & Dimensional check as per Codes and Standards

 Perform & monitoring check out / Line check internal and official with client.

 Responsible and monitoring closing punch list

 Review and controlling AFI Report before submit to client.

o As NDT Technician
 Performed PT (LEVEL II) to ASNT-TC-1A Standards

 Performed Non-destructive-test to access quality condition and/or identify defect for

piping system.
 Prepare report outlining findings and conclusions

 Completed paper work as per client standars.

 As QC in PT. Anecan Paratama Jaya - Kabil Project Location in PT. Anecan Pratama
jaya Periode 01 NOVEMBER 2020 – 31 AUGUST 2022
 Ensure the job areas and surroundings are safe and ensure all employs working with

Safety and aware about Safety Regulation.

 Material grade and heat number are verified and transfers on to the components.

 Oriental and slope is maintained as per isometric drawing.

 Perform internal Fit up inspection prior to invite official inspection with client.
 MarianusEdo
HP : 085269914670
Email [email protected]

 Ensure all the specification, procedure, Quality plan, Welder register and all related

document approve by all parties.

 Prepare quality records and final acceptance document where required.

 Ensure welding activity and check welding parameter during welding according WPS.

 Perform internal visual inspection prior to invite official inspection with client.

 As QC in PT. Sumbartec Jaya Levindo Project Location in PT. Drydocks Graha

Trisaka Industri-PaxOcean Periode 10 OCTOBER 2019 – 10 APRIL 2020
 Preparing Form Request For Inspection

 Able to reading drawing 3D for make it Request Inspection

 Make a summary RFI report

 Welding Inspection (Before, During and After Welding)

 Submit RFI to QC yard before Inspection

 Receivable new drawing and Revision drawing

 Responsible to controlling all of QC file

 As QC in PT. PT. Harapan Utama Indonesia Project Location in PT. Daya Radar
Utama Unit Lampung(DRU) Periode 23 NOVEMBER 2018 – 10 JUNY 2019
 Kick off Meeting, Weekly Meeting, and Monthly Meeting on Start Construction.

 Fabrication / Erection Structure/Piping , Documents and Work Quality in terms of

specification, workmanship and other variables as per Requirements of QC standard

operating procedure and Client’s specification.
 Surveillance check and Visual inspection of all welding Structure/ Piping work at pre-

fabrication.
 Verify/ Review Welding Parameters of FCAW, SMAW & GTAW process to be within

ranges specified in approved WPS during the shift on daily basis in maintain the record
for materials.
 Welding Inspection, Documentation & Dimensional check as per Codes and Standards.

 Ensuring workshop personnel are working to the correct procedure.

 Inspection of all welding activities Prior, During and After, which include Material

Check, Qualification and Welding Equipment (Randomly)

 Witness NDT test UT,MT,PT, Monitoring and review of preheat/ postheat & PWHT
 MarianusEdo
HP : 085269914670
Email [email protected]

 Ensuring that all Welding Inspection and NDT activities affecting the quality of welds

contained in each items have been completed and accepted.

 Review all NDT reports and evaluator certification validity and required level, records

drawings, material and weld traceability for proper documentation as per project
specification requirements.
 Review of documents and final documentation.

 As Welding Inspector And Welding Supervisor in PT. Hepsec Project Location in PT.
SKS LISTRIK KALIMANTAN (SKS) Periode 20 JUNI 2017 – 10 AUGUST 2018
 As Welding Inspector
 Preparing For Welder Qualification Test

 Check & monitoring Welder Qualification Test perform

 Preparing form Request Inspection

 Make Welding Mapping

 Able to reading drawing 3d for make it Request Inspection

 Inspection of all welding activities Prior, During and After, which include Material

Check, Qualification and Welding Equipment

 Check & monitor Preheat/ Interpass Temperature refer to WPS.

 Responsible to controling all of QC File

 As Welding Supervisor
 Arranged Welder team

 Prepare Welder and Tools for Welding process

 Check & verify personnel are working to the correct procedure.

 Responsible for all of welding progress

 Make Permit To Work

 As QC in PT. Cheres Gemilang Indonesia Project Location in PT. Siemens Periode

01 JUNY 2016 –29 SEPTEMBER 2016
 Fabrication/Erection Structure, Document and Work Quality in terms of specification,

workmanship and other variables as per requirements Qc Standard Operating Procedure

and Client specification.
 Welding Inspection (Before, During and After Welding)
 MarianusEdo
HP : 085269914670
Email [email protected]

 Review and understanding ITP, Project Specification , Project Quality Plans, WPS,

Welder Qualification Record and other related documents that support for
fabrication/inspection
 Perform and check Fit up Inspection (root, gap, missaligment etc).

 Check Calibration Welding Machine, Digital Temperature, etc.

 Check & verify Preheat Temperature refer to WPS.

 Check & monitor Interpass Temperature refer to WPS.

 Check and monitoring Welding Parameter (Voltage, Ampere, Travel Speed, & Heat

Input) refer to WPS.

 Check & monitoring Welding activities such as cleaning, grinding, etc.

 Conduct Visual Inspection

 Submit CIR to NDT Technician to perform NDT as requested.

 If Final Inspection was done by Client, prepare all related document (NDT Request,

Inspection Release Note, Punch List, Material and Welding Traceability) to submit to
client for reviewed.

 As QC in PT. Sinar Cendana Project Location in PT. Indian Oil Tanking Periode 26
FEBRUARY 2016 – 17 MAY 2016
 Monitoring weld joint preparation refer to WPS.

 Preparing Form Request For Inspection

 Perform Fit up and Visual Inspection prior to invite official inspection with client.

 Perform & witness line check refer to drawing.

 Perform & witness pressure test.

 Able to reading drawing 3D for make it Request Inspection.

 Make a summary RFI report.

 Submit RFI to QC yard & Client’s before Inspection.

 As QC in PT. Sinar Cendana Project Location in PT. Drydocks Graha Trisaka

Industri-PaxOcean Periode11 NOVEMBER 2014 – 10 AUGUST 2015
 Preparing Form Request For Inspection

 Able to reading drawing 3D for make it Request Inspection

 Make a summary RFI report

 Witness NDT test UT,MT, Monitoring and review of preheat/ postheat & PWHT
 MarianusEdo
HP : 085269914670
Email [email protected]

 Perform internal Fit up inspection prior to invite official inspection with client.

 Check & verify Preheat Temperature refer to WPS.

 Check & monitor Interpass Temperature refer to WPS.

 Perform internal Visual inspection prior to invite official inspection with client.

 Perform & witness Line check as to drawing requirements.

 Check & witness pressure test internal before official with client.

 Submit RFI to QC yard & Client’s before Official Inspection.

 Perform, check & verify document before reinstatement all system.

 Receivable new drawing and Revision drawing.

 Responsible to controlling all of QC file.

 As QC in PT. ASL SHIPYARD INDONESIA Project Location in PT. ASL

SHIPYARD INDONESIA Periode16 January 2014 – 15 October 2014
 Preparing Form Request For Inspection

 Able to reading drawing 3D for make it Request Inspection

 Make a summary RFI report

 Welding Inspection (Before, During and After Welding)

 Receivable new drawing and Revision drawing

 Responsible to controlling all of QC file

 As SAFETY in PT. Dunia Marindo Project Location in PT. Nexus Engineering- Kabil
Periode 23 JANUARY 2013 – 27 NOVEMBER 2014
 Make Permit To Work (PTW) for Hot Work and Confined Space

 Check & Monitoring Safety Working (Hot Work &Confined Space)

 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]
 MarianusEdo
HP : 085269914670
Email [email protected]