LEGEND : PART LIST

NO QTY ITEMS DESCRIPTION DWG NO

DENOTES PART/ITEM NUMBER
1 1 COLUMN SUMP COLUMN SUMP C/W 6 THK RUBBER LINING 4020-188-M-019
2 1 COLUMN SHELL-1 COLUMN SHELL-1 C/W 6 THK RUBBER LINING 4020-188-M-020
DENOTED NOZZLE NUMBER 3 1 COLUMN SHELL-2 COLUMN SHELL-2 C/W 6 THK RUBBER LINING 4020-188-M-020
4 1 COLUMN HEAD COLUMN HEAD C/W 6 THK RUBBER LINING 4020-188-M-021
5 5 1 DN1200 DUCT DN1200 DUCT PIPE ASSEMBLY
26
6 1 SUPPORT OF FRP CARBON STEEL C/W 3 THK RUBBER LINING 4020-188-M-023
27 7 1 FRP GRATING FRP GRATING PACKING SUPPORT 4020-188-M-023
8 5 DN3000 GASKET 3 THK x 3024 ID x 3230 OD GASKET -
9 9 8 DN1200 GASKET 3 THK x 1221 ID x 1510 OD GASKET -
26 10 2 SUPPORT DUCT PIPE SUPPORT 4020-188-M-022
25 11 1 DN150 GASKET 3 THK x 170.7 ID x 279 OD GASKET -
27
12 1 DEMISTER RESTRAINER FRP DEMISTER RESTRAINER -

9 13 1 PAD DEMISTER DEMISTER POLYPROPYLENE MESH PAD TO SUIT 1288 DIA -

26 14 1 SUPPORT DEMISTER FRP SUPPORT DEMISTER -

25 15 2 DN200 SPARGE INLET DN200 PIPE SPARGE SS316L ASSEMBLY -
27
5 16 1 DN25 SPARGE INLET DN25 PIPE SPARGE SS316L ASSEMBLY -
-
8 17 3 DN450 CLAMP FLANGE 10 THK x 461.8 ID x 635 OD FLANGE PLATE ASTM A36 & ASME B16.5
18 3 DN450 PERSPEX FLANGE 10 THK x 461.8 ID x 635 OD CLEAR PERSPEX FLANGE -

19 8 DN450 GASKET 3 THK x 461.8 ID x 635 OD GASKET -

10
31 32 33 20 1 DN1200 BUTTERFLY VALVE DN1200 BUTTERFLY VALVE C/W ACTUATOR
21 1 REDUCER DUCT REDUCER Ø1200 x Ø750 FABRICATED PLATE ASTM A36 4020-188-M-022

26 22 1 FLEXIBLE JOINT SPOOL FLEXIBLE JOINT SPOOL 4020-188-M-022

27 33 32 23 1 DN1200 FLEXIBLE DUCT JOINT DN1200 FLEXIBLE DUCT JOINT C/W FLANGE 4020-188-M-022
32 33 -
19 24 1 GASKET INLET FAN 3 THK x 766 ID x 860.43 OD GASKET
12 19 25 358 BOLTS M30 x 150 LG HEX HEAD BOLTS -
18 17 9 31 31 26 358 NUTS M30 HEX HEAD NUTS -
13
-
15 15 27 358 WASHERS M30-R PLAIN WASHERS
19 19 30 29 28 14 28 48 BOLTS M24 x 80 LG HEX HEAD BOLTS -
25 29 48 NUTS M24 HEX HEAD NUTS -
8
30 48 WASHERS M24-R PLAIN WASHERS -
25
31 32 33 31 76 BOLTS M20 x 80 LG HEX HEAD BOLTS -

10 32 76 NUTS M20 HEX HEAD NUTS -

33 76 WASHERS M20-R PLAIN WASHERS -

32 34 16 BOLTS M12 x 45 LG HEX HEAD BOLTS -
5 31 33
26 16 11 35 16 NUTS M12 HEX HEAD NUTS -

26 27 36 16 WASHERS M12-R PLAIN WASHERS -

27 25
19 5
8 20 27 26 23
19 9 25
25 25
30 34 36 35 GENERAL NOTES :
29 13. EXTERNAL SURFACE PROTECTION SHALL BE IN 1. MATERIALS OF CONSTRUCTION
2 - PLATE : ASTM A36, UNO
ACCORDANCE WITH 1990-000-ME-SPC-003_A APENDIX
29 SYSTEM-H - PIPE : ASTM A53 GRADE B & ASME B36
14. ALL NOZZLE TO BE SECURELY CAPPED WITH 6 THK - FITTINGS : ASTM A234 & ASME B16.9, UNO

17 PLATE BLANK FLANGE TO PREVENT INGRESS OF 2. COLUMN TO BE WITH INTERNALLY LINED 6 THK BUTYL
26 FOREIGN WATER & MOISTURE DURING TRANSPORT RUBBER
18 15 ALL CONTACT SURFACE FOR FLANGE FACES SHALL BE 3. LINING TO BE CONTINUED THROUGH NOZZLE INTERNAL
27 21 24 MACHINE FINISHED WITH SURFACES ROUGHNESS NOT AND OVER FLANGE FACE UNO
6.3
ROUGHER THAN WITH NOZZLE BOLTING DIMENSIONS 4. RUBBER LINING SHALL BE AUTOCLAVE HOT BONDED
8 25 27 26 25 9 27 26 26 27 TO ASME B16.5 CLASS 150, UNO 5. ALL WELDING SHALL COMPLY AWS D1.1 FOR ASTM A36
16. FOR WELDING SHELL JOINT REFER TO STANDARD TANK & 6 AND SS400 PLATE
7 DETAILS DWG 000-MEDST-0001 TO 0003 6 . ALL WELDS SHALL BE 6 CONTINUOUS FILLET UNO
17. ALL FLANGE BOLTS HOLES STRADDLE THE CENTER LINE 7. UPON COMPLETION OF RUBBER LINNING, COLUMN TO BE
6 18. DEMISTER (PART 13. 14) AND VALVE (PART 20) IS NOT APART CLEARLY MARKED "RUBBER LINED DO NOT WELD"
5
OF FABRICATOR PACKAGE SUPPLIED BY OTHERS 8. DESIGN
8 - TEMPERATURE : 25 - 35 °C
- PRESSURE : ATMOSPHERIC
25 EXPLODED TOP VIEW - TOTAL VOLUME : 20.42 m³
9. ALL BOLTS, NUTS AND GASKET SHALL BE COMPLY WITH
1 ISO 3506, GRADE A4, PROPERTY CLASS 70, UNO
10. ALL GASKETS SHALL BE 3 THK THICK KLINGERsil - C-8200
OR KLINGERtop - chem - 2000 ( H2SO4 RESISTANT ) CUT
INTO GASKET AND FULL FACE GASKET
18 17 11. SUMP SHELL AND SHELL HEAD WILL BE USING 6 THK PLATE
12. FABRICATION OF COLUMN SHALL BE IN ACCORDANCE

19 19 30 29 28 WITH 4020-ME-ESP-001 CARBON STEEL PLATE WORK

EXPLODED VIEW & TANK FABRICATION

GREEN GOLD TECHNOLOGY

ENGINEERING MANAGER
DRAWN 01.12.2022 ITY ReCYN PROJECT
CHECKED
4020-188-M-024 CYANIDE SCRUBBING COLUMN - NAME PLATE DETAILS ITY ReCYN PLANT
4020-188-M-023 CYANIDE SCRUBBING COLUMN - PART DETAILS
DATE : PROCESS
4020-188-M-022 CYANIDE SCRUBBING COLUMN - COLUMN DUCT DETAILS CYANIDE SCRUBBING COLUMN 188-CM-004
PROJECT MANAGER 4020-188-M-021 CYANIDE SCRUBBING COLUMN - COLUMN HEAD DETAILS 3 01.12.2022 NOZZLES EXTENTION AND UPDATE ORIENTATION APK JS
MECHANICAL/PIPING
4020-188-M-021 CYANIDE SCRUBBING COLUMN - COLUMN SHELL DETAILS 2 28.11.2022 AVR UPDATE APK JS
GENERAL ASSEMBLY - EXPLODED VIEW
HEAD OFFICE : CIVIL/STRUCTURAL 4020-188-M-019 CYANIDE SCRUBBING COLUMN - COLUMN SUMP DETAILS 1 26.08.2022 REVISED AS CLOUDED ASM HS SCALE PAPER SIZE DRAWING NUMBER REV
Sahid Sudirman Center (SSC), 39th Floor 4020-188-M-018 CYANIDE SCRUBBING COLUMN - GENERAL ARRANGEMENT 0 18.08.2022 ISSUED FOR CONSTRUCTION ASM JS
JL. Jend. Sudirman Kav.86
Phone : +62-21-50810000 (hunting)
Jakarta 10220 - INDONESIA DATE : ELECTRICAL/INSTRUMENT DWG.NUMBER REFERENCES TITLE NO DATE REVISION DESCRIPTION BY CHKD 1 : 75 A3 4020-188-M-017 3