Lithium EP Grease 0

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Lithium EP Grease

Reg No.: 2261/82-N

PRODUCT DESCRIPTIONS

LITHIUM EP GREASE is lithium-thickened grease designed for multi-functional applications under an extreme
pressure condition. They are formulated to withstand temperature up to 130°C for extended periods of time.
LITHIUM EP GREASE uses tough film base oils to provide excellent wear protection even in heavily loaded
applications. Because of the natural resistance of a lithium grease to water, LITHIUM EP GREASE works well in
damp environments. LITHIUM EP GREASE exhibits excellent mechanical stability both under operating condi-
tions and during storage.

LITHIUM EP GREASE is fortified with special selected additives to protect against rust and corrosion. A longer
service life is also achieved by the oxidation stability performance from the additives. Special extreme
pressure additives enhance the load carrying ability of the greases. Lithium EP Greases are available in various
NLGI grades to meet most temperature and equipment requirements. NLGI 0 and 1 are most readily pump-
able and ideal for centralized systems.

APPLICATIONS

LITHIUM EP GREASE is designed to lubricate ball and roller bearings, bushing, spline, universal joint, pins, bars,
slides and other applications on industrial and off-road equipment designed for grease lubrication.

LITHIUM EP GREASE can also be used to grease electric motor bearings, hoist bearings and gears, plastic
injection molding machines, paper machines, grinders and machine tools, concrete mixing machinery, pumps,
centrifuges, crushers, blow molding equipment, printing presses, shovels, textile machinery and other appli-
cations requiring extreme pressure greases.

BENEFITS
High load carrying capacity Test Method Typical Result

High dropping point NLGI Grade 0 1 2 3


Protects against rust and corrosion Lithium 12-OH
Thickener Type
Good extreme pressure properties Smooth
Texture
Resists water washout Visual Natural (Yellowish)
Color

Penetration @ 25°C
HEALTH AND SAFETY Worked 60 strokes 355 317 272 238
ASTM D-217
It is unlikely to pose any health or (1/10mm)

safety hazard when used in the Un-worked (1/10mm) 385 320 276 245
recommended applications Water Washout, %Loss @
ASTM D-1264 N/A 0.624 0.354 0.049
provided good standards of personal 79°C

and industrial hygiene are observed. Timken OK Load, Lbs (Min) ASTM D-2509 45 45 45 45

Oil Separation @ 100°C, N/A 7.573 2.723 0.821


%wt JIS K 2220

Copper Strip Corrosion ASTM D-4048 1b 1b 1b 1b

Dropping Point, °C ASTM D-2265 108 204 205 206

Base Oil
Viscosity Kinematics ASTM D-445
@100°C, xSt 17.0

@ 40°C, cSt 185.0


Viscosity Index ASTM D-2270 97

You might also like