Scribd
Upload
66 views12 pages

Pole Design

This document describes the analysis of a pole design using STAAD.Pro software. It includes the model geometry with joint and member definitions, material properties, loads applied, and the results of the analysis including checking against design codes. The analysis found that member 1 fails based on the critical load and ratio checks in the code.

Uploaded by

Mano Har
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views12 pages

Pole Design

This document describes the analysis of a pole design using STAAD.Pro software. It includes the model geometry with joint and member definitions, material properties, loads applied, and the results of the analysis including checking against design codes. The analysis found that member 1 fails based on the critical load and ratio checks in the code.

Uploaded by

Mano Har
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Friday, April 05, 2024, 05:26 AM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries5 *
* Version 20.07.10.65 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= APR 5, 2024 *
* Time= 5:24:15 *
* *
* USER ID: HP *
****************************************************

1. STAAD SPACE
INPUT FILE: Pole design.STD
2. START JOB INFORMATION
3. ENGINEER DATE 04-APR-24
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 3 0 22 0; 5 0 13.4 0; 6 0 12.2 0; 7 3 13.4 0; 8 3 12.2 0; 9 -3 13.4 0
9. 10 -3 12.2 0; 11 0 19 0; 12 2.12132 19.8787 0; 13 3 22 0; 14 2.12132 24.1213 0
10. 15 3.67382E-016 25 0; 16 -2.12132 24.1213 0; 17 -3 22 0; 18 -2.12132 19.8787 0
11. MEMBER INCIDENCES
12. 1 1 6; 3 5 6; 4 5 11; 6 5 7; 7 6 8; 8 5 9; 9 6 10; 12 11 3; 13 12 3; 14 13 3
13. 15 14 3; 16 15 3; 17 16 3; 18 17 3; 19 18 3
14. ELEMENT INCIDENCES SHELL
15. 10 9 5 6 10; 11 5 7 8 6; 20 3 16 15; 21 3 15 14; 22 3 14 13; 23 3 13 12
16. 24 3 12 11; 25 3 11 18; 26 3 18 17; 27 3 17 16
17. ELEMENT PROPERTY
18. 10 11 20 TO 27 THICKNESS 0.01
19. DEFINE MATERIAL START
20. ISOTROPIC STEEL
21. E 2.05E+008
22. POISSON 0.3
23. DENSITY 76.8195
24. ALPHA 1.2E-005
25. DAMP 0.03
26. TYPE STEEL
27. STRENGTH FY 253200 FU 407800 RY 1.5 RT 1.2
28. G 7.88462E+007
29. ISOTROPIC DUMMY
30. E 2.05E+008
31. POISSON 0.3
32. ALPHA 1.2E-005
33. DAMP 0.03
34. G 7.88462E+007
35. TYPE STEEL
36. STRENGTH FY 253200 FU 407800 RY 1.5 RT 1.2
37. END DEFINE MATERIAL
38. MEMBER PROPERTY BRITISH

D:\wte\Pole design.anl Page 1 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 2

39. 3 4 12 TABLE ST PIP45710.0


40. 1 TABLE ST PIPE OD 0.733 ID 0.711
41. 6 TO 9 13 TO 19 TABLE ST TUB40403.0
42. CONSTANTS
43. MATERIAL DUMMY MEMB 6 TO 11 13 TO 27
44. MATERIAL STEEL MEMB 1 3 4 12
45. SUPPORTS
46. 1 FIXED
47. LOAD 1 LOADTYPE NONE TITLE DL
48. JOINT LOAD
49. 3 FY -30
50. 5 FY -7.5
51. SELFWEIGHT Y -1
52. LOAD 2 LOADTYPE NONE TITLE LL
53. MEMBER LOAD
54. 7 9 14 18 UNI GY -1.
55. LOAD 3 LOADTYPE NONE TITLE WL
56. MEMBER LOAD
57. 1 UNI GZ 1.53
58. 4 UNI GZ 1.17
59. ELEMENT LOAD
60. 20 TO 27 PR GZ 1.5
61. 10 11 PR GZ 1.4
62. LOAD COMB 201 201
63. 1 1.2 2 1.2 3 1.2
64. LOAD COMB 202 202
65. 1 1.4 3 1.4
66. LOAD COMB 203 203
67. 1 1.4 2 1.6
68. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 16 NUMBER OF MEMBERS 15


NUMBER OF PLATES 10 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 1

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 14/ 7/ 48 DOF


TOTAL PRIMARY LOAD CASES = 3, TOTAL DEGREES OF FREEDOM = 90
TOTAL LOAD COMBINATION CASES = 3 SO FAR.
SIZE OF STIFFNESS MATRIX = 5 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.1/ 107993.5 MB

69. PARAMETER 1
70. CODE BS5950

D:\wte\Pole design.anl Page 2 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 3

71. KY 2 MEMB 1 3 4 12
72. KZ 2 MEMB 1 3 4 12
73. PY 355000 MEMB 1 3 4 12
74. TRACK 2 MEMB 1 3 4 12
75. LOAD LIST 201 TO 203
76. CHECK CODE MEMB 1 3 4 12

STAAD.Pro CODE CHECKING - (BSI )


***********************

PROGRAM CODE REVISION V2.13_5950-1_2000

D:\wte\Pole design.anl Page 3 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 4

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

* 1 ST PIPE FAIL BS-4.8.3.3.1 1.079 202


99.99 C 1664.69 0.00 -
=======================================================================
MATERIAL DATA
Grade of steel = S 275
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 354 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 1220.00
Gross Area = 249.50 Net Area = 249.50 Eff. Area = 249.50

z-z axis y-y axis


Moment of inertia : 162616.375 162616.375
Plastic modulus : 5734.381 5734.381
Elastic modulus : 4437.009 4437.009
Effective modulus : 4437.009 4437.009
Shear Area : 149.703 149.703

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 8857.42
Axial force/Squash load : 0.011

z-z axis y-y axis


Compression Capacity : 4539.2 4539.2
Moment Capacity : 1575.1 1575.1
Reduced Moment Capacity : 1575.1 1575.1
Shear Capacity : 3188.7 3188.7

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
x-x axis y-y axis
Slenderness : 95.576 95.576
Radius of gyration (cm) : 25.530 25.530
Effective Length : 24.400 24.400

LTB check unnecessary for this section

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Z) 0.032 202 - - 102.9 - -
BS-4.7 (C) 0.026 203 119.2 - - - -

D:\wte\Pole design.anl Page 4 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 5

BS-4.8.3.2 1.069 202 100.0 0.0 102.9 1664.7 0.0


BS-4.8.3.3.1 1.079 202 100.0 - - 0.0 1664.7
BS-4.8.3.3.3 1.093 202 100.0 - - 0.0 1664.7
Torsion and deflections have not been considered in the design.
_________________________

D:\wte\Pole design.anl Page 5 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 6

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

* 3 ST PIP45710.0 FAIL BS-4.8.3.3.1 1.050 202


54.86 C 566.38 0.00 -
=======================================================================
MATERIAL DATA
Grade of steel = S 275
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 354 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 120.00
Gross Area = 140.00 Net Area = 140.00 Eff. Area = 140.00

z-z axis y-y axis


Moment of inertia : 35090.004 35090.004
Plastic modulus : 1998.000 1998.000
Elastic modulus : 1535.667 1535.667
Effective modulus : 1535.667 1535.667
Shear Area : 84.000 84.000

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 4970.00
Axial force/Squash load : 0.011

z-z axis y-y axis


Compression Capacity : 4969.4 4969.4
Moment Capacity : 545.2 545.2
Reduced Moment Capacity : 545.2 545.2
Shear Capacity : 1789.2 1789.2

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
x-x axis y-y axis
Slenderness : 15.159 15.159
Radius of gyration (cm) : 15.832 15.832
Effective Length : 2.400 2.400

LTB check unnecessary for this section

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Z) 0.039 202 - - 69.6 - -
BS-4.7 (C) 0.014 203 68.6 - - - -

D:\wte\Pole design.anl Page 6 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 7

BS-4.8.3.2 1.050 202 56.7 0.0 69.6 566.4 0.0


BS-4.8.3.3.1 1.050 202 54.9 - - 0.0 566.4
BS-4.8.3.3.3 1.057 202 54.9 - - 0.0 566.4
Torsion and deflections have not been considered in the design.
_________________________

D:\wte\Pole design.anl Page 7 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 8

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

4 ST PIP45710.0 PASS BS-4.8.3.3.1 0.905 202


54.95 C 485.41 0.00 -
=======================================================================
MATERIAL DATA
Grade of steel = S 275
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 354 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 560.00
Gross Area = 140.00 Net Area = 140.00 Eff. Area = 140.00

z-z axis y-y axis


Moment of inertia : 35090.004 35090.004
Plastic modulus : 1998.000 1998.000
Elastic modulus : 1535.667 1535.667
Effective modulus : 1535.667 1535.667
Shear Area : 84.000 84.000

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 4970.00
Axial force/Squash load : 0.011

z-z axis y-y axis


Compression Capacity : 3741.5 3741.5
Moment Capacity : 545.2 545.2
Reduced Moment Capacity : 545.2 545.2
Shear Capacity : 1789.2 1789.2

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
x-x axis y-y axis
Slenderness : 70.744 70.744
Radius of gyration (cm) : 15.832 15.832
Effective Length : 11.200 11.200

LTB check unnecessary for this section

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Z) 0.035 202 - - 62.6 - -
BS-4.7 (C) 0.017 203 64.5 - - - -

D:\wte\Pole design.anl Page 8 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 9

BS-4.8.3.2 0.901 202 54.9 0.0 62.6 485.4 0.0


BS-4.8.3.3.1 0.905 202 54.9 - - 0.0 485.4
BS-4.8.3.3.3 0.912 202 54.9 - - 0.0 485.4
Torsion and deflections have not been considered in the design.
_________________________

D:\wte\Pole design.anl Page 9 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 10

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

12 ST PIP45710.0 PASS BS-4.8.3.3.1 0.290 202


18.69 C 156.04 0.00 -
=======================================================================
MATERIAL DATA
Grade of steel = S 275
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 354 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 140.00 Net Area = 140.00 Eff. Area = 140.00

z-z axis y-y axis


Moment of inertia : 35090.004 35090.004
Plastic modulus : 1998.000 1998.000
Elastic modulus : 1535.667 1535.667
Effective modulus : 1535.667 1535.667
Shear Area : 84.000 84.000

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 4970.00
Axial force/Squash load : 0.004

z-z axis y-y axis


Compression Capacity : 4689.5 4689.5
Moment Capacity : 545.2 545.2
Reduced Moment Capacity : 545.2 545.2
Shear Capacity : 1789.2 1789.2

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
x-x axis y-y axis
Slenderness : 37.899 37.899
Radius of gyration (cm) : 15.832 15.832
Effective Length : 6.000 6.000

LTB check unnecessary for this section

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Z) 0.025 202 - - 44.8 - -
BS-4.7 (C) 0.005 203 21.6 - - - -

D:\wte\Pole design.anl Page 10 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 11

BS-4.8.3.2 0.290 202 18.7 0.0 44.8 156.0 0.0


BS-4.8.3.3.1 0.290 202 18.7 - - 0.0 156.0
BS-4.8.3.3.3 0.291 202 18.7 - - 0.0 156.0
Torsion and deflections have not been considered in the design.
_________________________

************** END OF TABULATED RESULT OF DESIGN **************

77. FINISH

D:\wte\Pole design.anl Page 11 of 12


Friday, April 05, 2024, 05:26 AM
STAAD SPACE -- PAGE NO. 12

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= APR 5,2024 TIME= 5:24:19 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2014 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

D:\wte\Pole design.anl Page 12 of 12

You might also like