0% found this document useful (0 votes)
173 views22 pages

Manual Hardware IHM XINJE TG TE

The document provides information about TG series HMI products including features, specifications, naming conventions, and hardware. Key details include support for 16 million colors display, rich graphic capabilities, data collection/management functions, multi-language support, USB and Ethernet connectivity options, and IP65 rated enclosures.

Uploaded by

Masmu Otomotif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
173 views22 pages

Manual Hardware IHM XINJE TG TE

The document provides information about TG series HMI products including features, specifications, naming conventions, and hardware. Key details include support for 16 million colors display, rich graphic capabilities, data collection/management functions, multi-language support, USB and Ethernet connectivity options, and IP65 rated enclosures.

Uploaded by

Masmu Otomotif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

TG/TE series HMI

manual【Hardware】

I
1 TG series HMI

1-1 Features

Xinje TG series HMI have high quality display: 16 million true color TFT-LCD, support BMP
and JPG format, have rich 3D photo gallery, has the flexible components choice space,
user-defined animation, convenient mode setting switch, precise touch calibration function,
data acquisition save function, curve shows, and other forms of data management ways, offers
two USB interfaces, perform high speed data download, high speed loading and high-speed
operation, can communication with several PLC simultaneously, support Ethernet
communication.

1-1-1 Product features


◼ Display
➢ 16 million true colors TFT-LCD, support BMP and JPG format, better color and
display;
➢ Precise touch calibration function;
➢ 128MB memory, perform high speed data download, high speed loading and
high-speed operation
➢ Memory capacity increase substantially;
➢ Support multi-language: Chinese, English, Japanese, Korean, German, French,
Arabic, etc. The fonts support any size, artistic effect, bold, italic, etc.
➢ Rich images of material, screen operation

◼ Control
➢ Switch control, dynamic monitor and display data, bar map, real time trend map, time
trend map, XY trend map, discrete/continue column map, real time alarm, history
alarm record…
➢ User-defined data collection and saving function
➢ Set user authority, 9 levels password protection
➢ Simulate online/offline, upload/download data, configuration function
➢ Powerful C function block
➢ USB-A port inside, connect flash disk to copy data, speed up to 480Mbps
➢ Special USB-B port for data download, make the data transfer faster
➢ User-defined animation design
➢ Contain all function of TH series
◼ Communication
➢ Two ports communication independently, can connect two different devices at the
same time
➢ Add Ethernet interface communication, can communicate with TBOX, Siemens

1
S7-1200 and other Modbus-TCP devices
➢ Drive the panel printer directly, economical and flexible
➢ Support free format communication, user edits the driver program

1-1-2 Module naming rule

1: Special type C: for CAD function


S: for vision function
Empty: normal type
2: Series name TG
3: Display size 465: 4.3’’
765: 7.0’’
865: 8.0”
A62: 10.1”
C65: 15.6’’
4: Interface type ET: USB-B download port, USB-A flash disk port , Ethernet port
UT: USB-B download port, USB-A flash disk port
MT: USB-B download port
5: Type Empty: Normal type
(P): oil resistant

Special models
TG765-XT: compact type of TG765-MT, it has USB-B port, one RS232 port, without clock.

TG765-XT-C: compact type of TG765-MT, it has USB-B port, one RS232 port, with clock.

1-1-3 Product models

Model LCD size LCD type Notes


TG465-MT/UT 4.3’’ TG series: normal model
TG465-MT/UT(P) CTG series: for CAD function
TG765-MT/UT/ET 7’’ STG series: for vision function
TG765-MT/UT/ET(P) MT: USB-B download port
CTG765-ET/UT UT: USB-B download port, USB-A U-disk
STG765-ET port
TG765-XT TFT-LCD ET: USB-B download port, USB-A U-disk
TG765-XT-C port, Ethernet port
TG865-MT/UT/ET 8’’ XT: compact type of TG765-MT, it has
TG865-MT/ET(P) USB-B port, one RS232 port, without clock.
CTG865-ET XT-C: compact type of TG765-MT, it has
STG865-ET USB-B port, one RS232 port, with clock.

2
TGA62-MT/ET 10.1’’ (P): oil resistant
TGA62-MT/ET(P)
CTGA62-ET
TGC65-MT/UT/ET 15.6’’

1-2 General specifications

HMI specifications

Item TG465 TG765 TG865 TGA62 TGC65


Size 4.3’’ 7.0’’ 8.0″ 10.1″ 15.6’’
Type 16 million colors
Resolution 480*272 800*480 800*600 800*480 1366*768
Non-adjust Adjustable (through register
Brightness Non-adjustable
Screen able PFW100)
Touch panel 4-wire resistance mode
Using life More than 50000 hours, temperature 25℃, running for 24 hours
Language Chinese, English, Japanese, Korean, German, French, Arabic…
Character Any font and size
Memory Capacity 64MB 128MB (TG765-XT is 64MB)

Electric specifications
Item TG465 TG765 TG865 TGA62 TGC65
Input DC24V (Range: DC22V-DC26V)
voltage
Consumptio 140mA 200mA 250mA 270mA 730mA
n current
Allowable
momentary
Electric Below 10ms (Actual power failure<1s)
power
failure
Withstand
AC1000V,10mA,less than 1 minute (signal and ground)
voltage
Insulated
DC500V, above 10MΩ (signal and ground)
impedance
Operation
0-50℃
temperature
Reserve
Environ -20-60℃
temperature
ment
Environment
10%RH-90%RH(no condensation)
humidity
Withstand 10-25HZ(X,Y,Z each direction 30 minutes 2G)

3
oscillation
Anti-jammin
Voltage noise:1500Vp-p, pulse 1us, 1 minute
g
Surrounding
No corrosive gas
air
Protection
IP65
construction
Cooling
Natural air cooling
method
Exterior
152.0*102. 200.4*146 224.4*170. 272.2*191. 410.0*270.
Construc dimension
0*41.8 .9*43.4 8*45.5 7*51.2 0*65.0
tion (mm)
Mounting
192.0*138 211.4*157. 260.2*179. 399.0*259.
dimension 144.0*94.0
.5 8 7 0
(mm)
RS232/ RS232/RS485/RS422 (TG765-XT, TG765-XT-C only
PLC port
RS485 support RS232)
Download - RS232/RS485 (TG765-XT and TG765-XT-C don’t
port have this port)
Interface Ethernet - RJ45 (Only for ET series)
port
USB-A (accord with USB2.0), flash disk port (UT/ET
USB1 -
support)
USB2 USB-B (accord with USB2.0), USB download port

TG series HMI display area dimension:


Series Display area dimension (mm)
TG465 95.04*53.86

TG765 154.08*85.92

TG865 162.0*121.5

TGA62 219.6*131.76

TGC65 344.23*193.54

1-3 Hardware

1-3-1 Hardware structure


The back side of TG series HMI:

4
Nameplate
USB-A

USB-B

RJ45

Power supply

12 34
24V 0V FG

1 2 3 4

Download PLC

Download port PLC port DIP switch

1-3-2 Ports introduction


TG series HMI port:

Outline Name Function

1 2 3 4
DIP switch Force-download, touch area adjustment
1 2 3 4

Download port RS232/RS485


Download

PLC port RS232/RS485/RS422


PLC

USB-A Connect to flash disk to store data

USB-B Connect USB cable to download/upload program

Support TBOX, Siemens S7-1200 and other


Ethernet port
devices which support Modbus-TCP protocol

5
1. DIP switch
TG series has 4-bit DIP switch at the back side; they can set the function of COM1 port.
Switch DIP1 DIP2 DIP3 DIP4 Function
OFF OFF OFF ON Undefined
OFF ON OFF OFF Force-download mode
State System menu: Adjust clock and touch panel, Import
OFF OFF ON OFF
program of flash disk
ON OFF OFF OFF Undefined

If the screen cannot show normally after downloading the program, please use
force-download.
Step:
(1) Cut off the power of TG, turn ON DIP switch 2;
(2) Power on TG, connect the download cable to PC to download the program;
(3) Turn OFF DIP switch 2 after finishing the download, repower on the TG.

1 2 3 4

ON
OFF

2. Communication interface
The Pins definition of download port:
Pin Name Description
1 NC Unused terminal
2 RXD RS232 receive
3 TXD RS232 send
4 A RS485 + signal
5 GND Signal ground
6 NC Unused terminal
7 B RS485 - signal
8 NC Unused terminal
9 NC Unused terminal
Note: TG465, TG765-XT and TG765-XT-C don’t have this port.

The Pins definition of PLC port:


Pin Name Description
1 TD+ RS422 send +
2 RXD RS232 receive
3 TXD RS232 send
4 A RS485 + signal
5 GND Signal ground

6
6 TD- RS422 send -
7 B RS485 - signal
8 RDD- RS422 receive -
9 RDD+ RS422 receive +

TG765-XT, TG765-XT-C PLC port:


Pin Name Description
1 NC Unused terminal
2 RXD RS232 receive
3 TXD RS232 send
4 NC Unused terminal
5 GND Signal ground
6 NC Unused terminal
7 NC Unused terminal
8 NC Unused terminal
9 NC Unused terminal

TG465 COM2 (PLC port):


Pin Name Description
1 NC Unused terminal
2 RXD RS232 receive
3 TXD RS232 send
4 A RS485+ signal
5 GND Signal ground
6 NC Unused terminal
7 B RS485- signal
8 NC Unused terminal
9 NC Unused terminal

3. USB-A port
USB-A (accord with USB2.0) of TG series HMI has below function:
• Backup management, data export/import, the speed can up to 480 Mbps.

USB-A port definition Pin Name Description


1 +5V +5V voltage signal
2 DATA+ Data signal +
3 DATA- Data signal -
4 —5V -5V voltage signal

4. USB-B port
7
TG has one USB-B port (accord with USB2.0), located at the back side of TG, the
functions are shown as below:
• To download the data, the speed can up to 480Mbps.
USB-B port definition

Pin Name Description


1 +5V +5V voltage signal
2 DATA- Data signal -
3 DATA+ Data signal +
4 GND Ground signal

(1) Please use shielded USB cables.

(2) Please install USB driver before using. Download the driver from www.xinje.com.

(3) Connect TG with PC, open Touchwin software, click “ or ” to download the program.

5. RJ45 port
The pins definition of RJ45 port
Pin Color Name Explanation
8 1 Orange white TXD+ Send +
2 Orange TXD- Send -
1 3 Green white RXD+ Receive +
4 Blue - -
5 Blue white - -
6 Green RXD- Receive -
7 Brown white - -
8 Brown - -

3-4 Dimensions and installation

3-4-1 Product dimensions

8
TG465 (Unit: mm)
41.8 152.0 142.0

102.0

92.0
24V 0V FG

1 2 3 4

1 2 3 4
PLC

144.0

94.0
TG765-MT/UT/ET, CTG765, STG765 (Unit: mm)

43.4
6.6 200.4
146.9

PWR

190.0 192.0

THINGET
138.5
136.5

MODE: TG760T-MT
S/ N: N20121028028

Xinje Electronic Co.,Ltd

24V 0V FG COM1 COM2


12 34

1 2 3 4

9
TG765-XT, TG765-XT-C (Unit: mm)

6.6 43.4 200.4

146.9
PWR

190.0 192.0

TouchWin

138.5
136.5

MODE: TG760T-XT
S/ N: N20121028028

Xinje Electric Co.,Ltd

24V 0V FG
12 34 PLC

1 2 3 4

TG865-MT/UT/ET, CTG865, STG865 (Unit: mm)

45.5
38.0 224.4
170.8

211.4
209.4
157.8
155.8

12 34
24V 0V FG

1 2 3 4

Download PLC

10
TGA62-MT/ET, CTGA62 (Unit: mm)

272.2 51.2

191.7
260.2
258.2
177.7

179.7
24V 0V FG

1 2 3 4

Download PLC

TGC65-MT/UT/ET (Unit: mm)

65.0
56.5 410.0 399.0
259.0
270.0

PWR

395.0
255.0

24V 0V FG

1 2 3 4

Download PLC

11
3-4-2 Installation and using environment
Install requirements:
TG has four ferric mounting racks when out of factory, there are two square holes on the up,
down side of TG, use mounting rack to fix the TG with control cabinet.
In order to avoid TG temperature too high after long time working, please keep 10cm space on
the up/down and 5cm on the left/right side of the TG when installing.

Install panel
Fixed bracket

Install steps:
1. Refer to the dimension in the former chapter to open a rectangle mounting hole in the
control cabinet;
2. Add airproof circles in the airproof slot when installing;
3. Insert the bottom of TH into the mounting hole of control cabinet;
4. Insert the install rack into the fix hole of TG then tighten the screw;
5. Connect TG and PLC with communication cable.
Notice: The communication cable can be offered by the supplier or made by user
according to the connection diagram, input +24V DC power to start working
Environment:
Please use TG series touch screen indoor.

Do not use TG in below environment:


Inflammable gas, steam, dust, fast vary temperature, high humidity (it may cause
moisture inside TG).
Power supply requirements:
TG series touch screen use DC +24V power supply only. The permitted voltage range is
20V~26V. The connection is as below:

+24V 0 V
+DC-
Besides, if connect high voltage or AC power supply with TG, the TG may be damaged and
cause electric shock to human body.

If use the DC +24V output of PLC, make sure the PLC has enough current to drive
the TG.

12
2 TE series HMI

2-1 Features

• New cover design, silver color, more refined appearance


• 7 inch normal dimension, the models include TE765-MT/UT/ET
• Use long life LED backlight to extend the using life, industry LCD can withstand high vibration
• Fit for serious environment, resistant to corrosive liquids and gases, running temperature -10℃-60℃
• 400MHz CPU, 128M internal memory, perfect data processing ability, fast download and running
speed, better animation effect

2-1-1 Product features


◼ Display
➢ 16 million true colors TFT-LCD, support BMP and JPG format, better color and display;
➢ 128MB memory, perform high speed data download, high speed loading and high-speed operation
➢ Memory capacity increase substantially;
➢ Support multi-language: Chinese, English, Japanese, Korean, German, French, Arabic, etc. The fonts
support any size, artistic effect, bold, italic, etc.
➢ Rich images of material, screen operation
◼ Control
➢ Switch control, dynamic monitor and display data, bar map, real time trend map, time trend map, XY
trend map, discrete/continue column map, real time alarm, history alarm record…
➢ User-defined data collection and saving function
➢ Set user authority, 9 levels password protection
➢ Simulate online/offline, upload/download data, configuration function
➢ Powerful C function block
➢ USB-A port inside, connect flash disk to copy data, speed up to 480Mbps
➢ Special USB-B port for data download, make the data transfer faster
➢ User-defined animation design
➢ Contain all function of TH series
◼ Communication
➢ Two ports communication independently, can connect two different devices at the same time
➢ Add Ethernet interface communication, can communicate with TBOX, Siemens S7-1200 and other
Modbus-TCP devices
➢ Drive the panel printer directly, economical and flexible
➢ Support free format communication, user edits the driver program

1
2-1-2 Module naming rule

1: Series name TE
2: Display size 765: 7.0’’
3: Interface type ET: USB-B download port, USB-A flash disk port , Ethernet port
UT: USB-B download port, USB-A flash disk port
MT: USB-B download port
4: Type Empty: Normal type
(P): oil resistant

2-1-3 Product models

Model Display LCD type Notes


TE765-MT
7’’ TFT-LCD USB-B download port
TE765-MT(P)
TE765-UT
7’’ TFT-LCD USB-B download port, USB-A flash disk port
TE765-UT(P)
TE765-ET
7’’ TFT-LCD USB-B download port, USB-A flash disk port, Ethernet port
TE765-ET(P)

2-2 General specifications

HMI specifications
TE765-MT TE765-UT TE765-ET
Item
TE765-MT(P) TE765-UT(P) TE765-ET(P)
Size 7.0’’
Type 16 million colors
Resolution 800*480
Brightness Adjustable (through register PFW100)
Screen
Touch panel 4-wire resistance mode
Using life More than 50000 hours, temperature 25℃, running for 24 hours
Language Chinese, English, Japanese, Korean, German, French, Arabic…
Character Any font and size
Memory Capacity 128MB

2
Electric specifications
Item TE765-MT TE765-UT TE765-ET
TE765-MT(P) TE765-UT(P) TE765-ET(P)
Input voltage DC24V (Range: DC22V-DC26V)
Consumption 200mA
current
Allowable
momentary Below 10ms (Actual power failure<1s)
Electric
power failure
Withstand
AC1000V,10mA,less than 1 minute (signal and ground)
voltage
Insulated
DC500V, above 10MΩ (signal and ground)
impedance
Operation
-10-60℃
temperature
Reserve
-20-65℃
temperature
Environment
10%RH-90%RH (no condensation)
humidity
Environ
Withstand
ment 10-25Hz (X,Y,Z each direction 30 minutes 2G)
oscillation
Anti-jamming Voltage noise:1500Vp-p, pulse 1us, 1 minute
Surrounding
No corrosive gas
air
Protection
IP65
construction
Cooling
Natural air cooling
method
Exterior
Construc dimension 200.4*146.9*43.4
tion (mm)
Mounting
dimension 192.0*138.5
(mm)
PLC port RS232/RS485/RS422
Download port RS232/RS485
Interface Ethernet port - - RJ45
USB1 USB-A (accord with USB2.0), flash disk port (UT/ET support)
USB2 USB-B (accord with USB2.0), USB download port

3
TE series HMI display area dimension:
Series Display area dimension (mm)
TG465 154.08*85.92

2-3 Hardware

2-3-1 Hardware structure


The back side of TE series HMI:

Nameplate
USB-A

USB-B

RJ45

Power supply

12 34
24V 0V FG

1 2 3 4

Download PLC

Download port PLC port DIP switch

2-3-2 Ports introduction


TE series HMI port:

Outline Name Function

1 2 3 4
DIP switch Force-download, touch area adjustment
1 2 3 4

Download port RS232/RS485


Download

PLC port RS232/RS485/RS422


PLC

4
USB-A Connect to flash disk to store data

USB-B Connect USB cable to download/upload program

Support TBOX, Siemens S7-1200 and other


Ethernet port
devices which support Modbus-TCP protocol

1. DIP switch
TE series has 4-bit DIP switch at the back side; they can set the function of COM1 port.
Switch DIP1 DIP2 DIP3 DIP4 Function
OFF OFF OFF ON Undefined
OFF ON OFF OFF Force-download mode
State System menu: Adjust clock and touch panel, Import program of flash
OFF OFF ON OFF
disk
ON OFF OFF OFF Undefined

If the screen cannot show normally after downloading the program, please use force-download.
Step:
(1) Cut off the power of TE, turn ON DIP switch 2;
(2) Power on TE, connect the download cable to PC to download the program;
(3) Turn OFF DIP switch 2 after finishing the download, repower on the TE.

1 2 3 4

ON
OFF

2. Communication interface
The Pins definition of download port:
Pin Name Description
1 NC Unused terminal
2 RXD RS232 receive
3 TXD RS232 send
4 A RS485 + signal
5 GND Signal ground
6 NC Unused terminal
7 B RS485 - signal
8 NC Unused terminal
9 NC Unused terminal

5
The Pins definition of PLC port:
Pin Name Description
1 TD+ RS422 send +
2 RXD RS232 receive
3 TXD RS232 send
4 A RS485 + signal
5 GND Signal ground
6 TD- RS422 send -
7 B RS485 - signal
8 RDD- RS422 receive -
9 RDD+ RS422 receive +

3. USB-A port
USB-A (accord with USB2.0) of TE series HMI has below function:
• Backup management, data export/import, the speed can up to 480 Mbps.

USB-A port definition Pin Name Description


1 +5V +5V voltage signal
2 DATA+ Data signal +
3 DATA- Data signal -
4 —5V -5V voltage signal

4. USB-B port
TE has one USB-B port (accord with USB2.0), located at the back side of TE, the functions are shown as
below:
• To download the data, the speed can up to 480Mbps.
USB-B port definition

Pin Name Description


1 +5V +5V voltage signal
2 DATA- Data signal -
3 DATA+ Data signal +
4 GND Ground signal

(2) Please use shielded USB cables.

6
(2) Please install USB driver before using. Download the driver from www.xinje.com.

(3) Connect TE with PC, open Touchwin software, click “ or ” to download the program.

5. RJ45 port
The pins definition of RJ45 port
Pin Color Name Explanation
8 1 Orange white TXD+ Send +
2 Orange TXD- Send -
1 3 Green white RXD+ Receive +
4 Blue - -
5 Blue white - -
6 Green RXD- Receive -
7 Brown white - -
8 Brown - -

4-4 Dimensions and installation

4-4-1 Product dimensions


TE765 (Unit: mm)

43.4
6.6 200.4
146.9

PWR

190.0 192.0

THINGET
138.5
136.5

MODE: TG760T-MT
S/ N: N20121028028

Xinje Electronic Co.,Ltd

24V 0V FG COM1 COM2


12 34

1 2 3 4

4-4-2 Installation and using environment

Install requirements:
TE has four ferric mounting racks when out of factory, there are two square holes on the up, down side of TE,
use mounting rack to fix the TE with control cabinet.
7
In order to avoid TE temperature too high after long time working, please keep 10cm space on the up/down
and 5cm on the left/right side of the TE when installing.

Install panel
Fixed bracket

Install steps:
1. Refer to the dimension in the former chapter to open a rectangle mounting hole in the control cabinet;
2. Add airproof circles in the airproof slot when installing;
3. Insert the bottom of TH into the mounting hole of control cabinet;
4. Insert the install rack into the fix hole of TH then tighten the screw;
5. Connect TE and PLC with communication cable.
Notice: The communication cable can be offered by the supplier or made by user according to the
connection diagram, input +24V DC power to start working
Environment:
Please use TE series touch screen indoor.

Do not use TE in below environment:


Inflammable gas, steam, dust, fast vary temperature, high humidity (it may cause moisture inside TG).
Power supply requirements:
TE series touch screen use DC +24V power supply only. The permitted voltage range is 20V~26V. The
connection is as below:

+24V 0 V
+DC-
Besides, if connect high voltage or AC power supply with TE, the TE may be damaged and cause electric
shock to human body.

If use the DC +24V output of PLC, make sure the PLC has enough current to drive the TE.

8
Que esse conteúdo tenha agregado valor e conhecimento pra você!

Seu contato é importante para nós!


• www.kalatec.com.br
• Instagram - @kalateceautomação
• Facebook – kalatecautomação

NOSSAS FILIAIS

Matriz Campinas – SP Filial São Paulo – SP Filial Joinville – SC


Rua Salto, 99 Av. das Nações Unidas, R. Almirante Jaceguay, 3659
Jd. do Trevo 18.801 – 11o Andar Bairro Costa e Silva
(19) 3045-4900 (11) 5514-7680 (47) 3425-0042

You might also like