DLX1224 multi channel

CASAMBI Made in Italy

Rev. 11/07/2023
Device Manual Pag.1 / 6

Warnings

To guarantee the best performances and the full use of functions, make sure
to download on your device the last release of CASAMBI APP.

• Functionality test are done on all dimmers to ensure the right working.
In case the device is still paired to “Dalcnet network”, you are asked to
unpair it by following the instructions on CASAMBI APP.

• Whenever CASAMBI APP requires an upgrade of the profile installed in

the LED Dimmers, follow the instruction to do it.
This allows you to stay always up to date and benefit of new functions
released.

Check the available profiles on the product manual in our website:

http://www.dalnet.com

DALCNET S.r.l, Registered office: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
Headquarters: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
VAT: IT04023100235 – Tel. +39 0444 1836680 - www.dalcnet.com – [email protected]
 DLX1224 multi channel
CASAMBI Made in Italy
Rev. 11/07/2023
Device Manual Pag.2 / 6

FEATURES
• DIMMER+DRIVER CASAMBI
• Input: DC 12-24 Vdc
• Command: APP CASAMBI
• Local Command: N°4 Push Buttons Normally Open (N.O.)
• Control: Dimmer White, Tunable White, Color RGB, RGBW or RGB+W
• Control for luminaires with Direct and Indirect Light
• Voltage or Current output for LED strip
• Typical efficiency >95%
• Extended temperature range
• 100% Functional Test

➢ PRODUCT DESCRIPTION

This DLX1224 at 4 channels with CASAMBI module allows to control all kind of leds: White, Tunable White, RGB and RGBW.
Through this Dalcnet device it is possible to adjust the luminous brightness, to create multiple color scenes and settle color games, thanks to all
commands available on “CASAMBI APP”. The device is also provide with 4 analog input (n°4 Push Buttons Normally Open) to control up to four
different scenes.
With Casambi APP it is possible to control Led lights just from one view, by taking a photo of the lamps in a room, or by creating different
scenarios.

Controlling all your lamps from one view, it is possible to control all your lighting fixtures with one view, individually or as a group. For example
it is possible create a group of lights within home (eg. bedroom, kitchen, etc..) as in the workplace (eg. offices, showroom, etc..) and turn all off
/ on or dim with just one tap

Control your lights from a photo. It is possible to control only the lights you desire, just taking a photo of the room, and putting the icon of the
lamp on the real position.

Create scenes for different lighting situations: Thanks to this function it is possible to create and store on the app many scenarios with different
levels of brightness, different color temperature or RGB scenes.

Download the free Casambi APP on APP STORE and GOOGLE PLAY.
Necessary conditions for a correct function are:

• Devices with O.S. APPLE iOS 8.2 o later version

• Devices with O.S. ANDROID 4.4 o later version
• Normally Open Push Buttons (N.O.)
• Casambi App, download for free on App Store and Google Play

→ For the whole and updated Device Manual refer to producer’s website: http://www.dalcnet.com
→ For the correct functioning of CASAMBI APP refer to the CASAMBI website: https://support.casambi.com/support/home

DALCNET S.r.l, Registered office: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
Headquarters: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
VAT: IT04023100235 – Tel. +39 0444 1836680 - www.dalcnet.com – [email protected]
 DLX1224 multi channel
CASAMBI Made in Italy
Rev. 11/07/2023
Device Manual Pag.3 / 6

➢ PRODUCTS CODE

CONSTANT CURRENT VARIANTS (common anode)

CODE Supply Output Channels Commands
voltage
DLX1224-4CC350-CASAMBI 12-24V DC 4x350mA 4 APP CASAMBI – 4 push buttons N.O.
DLX1224-4CC500-CASAMBI 12-24V DC 4x500mA 4 APP CASAMBI – 4 push buttons N.O.
The factory default profile of the product is DLX4-CBM-RGB+W variant RGB+W
In case you want to use profiles like DLX4-CBM-W (White), DLX4-CBM-TW (Tunable White), DLX4-CBM-RGB (RGB) or DLX4-CBM-RGBW variant RGBW, etc, it is
necessary to log in Casambi APP and download the desired profile. Warning: unpair the Dimmer Led by any Network Casambi.

CONSTANT VOLTAGE VARIANTS (common anode)

CODE Supply Output Channels Commands
voltage
DLX1224-4CV-CASAMBI 12-24V DC 4 x 5A (max 10A tot) 1 APP CASAMBI – 4 push button N.O.
The factory default profile of the product is DLX4-CBM-RGB+W variant RGB+W
In case you want to use profiles like DLX4-CBM-W (White), DLX4-CBM-TW (Tunable White), DLX4-CBM-RGB (RGB) or DLX4-CBM-RGBW variant RGBW, etc, it is
necessary to log in Casambi APP and download the desired profile. Warning: unpair the Dimmer Led by any Network Casambi.

➢ PROTECTIONS
CC CV
OTP Over temperature protection 1 ✓ 
OVP Over voltage protection 2 ✓ ✓
UVP Under voltage protection 2 ✓ ✓
RVP Reverse polarity protection 2 ✓ ✓
IFP Input fuse protection 2 ✓ ✓
OCP Open circuit protection ✓ 
CLP Current limit protection ✓ 

➢ TYPE OF PROFILES
PROFILE Supply Output Channels Commands
Voltage
DLX4-CBM-W 12-24V DC 4 x CC/CV 4 APP CASAMBI – push buttons N.O. DIMMER
DLX4-CBM-2CH DIRECT/INDIRECT 12-24V DC 2 x CC/CV 2 APP CASAMBI – push buttons N.O. DIRECT/INDIRECT
DLX4-CBM-Dim to Warm 12-24V DC 2 x CC/CV 2 APP CASAMBI – push buttons N.O. DIM TO WARM
DLX4-CBM-TW 12-24V DC 2 x CC/CV 2 APP CASAMBI – push buttons N.O. TUNNABLE WHITE
DLX4-CBM-TW 2700-6000K 12-24V DC 2 x CC/CV 2 APP CASAMBI – push buttons N.O. TUNNABLE WHITE
DLX4-CBM-TW 3000-5000K 12-24V DC 2 x CC/CV 2 APP CASAMBI – push buttons N.O. TUNNABLE WHITE
DLX4-CBM-RGB 12-24V DC 3 x CC/CV 3 APP CASAMBI – push buttons N.O. RGB
DLX4-CBM-RGBW 12-24V DC 4 x CC/CV 4 APP CASAMBI – push buttons N.O. RGBW
DLX4-CBM-RGB+W 12-24V DC 4 x CC/CV 3+1 APP CASAMBI – push buttons N.O. RGB W

1
Thermal Protection on the output channel in case of high temperature. The termal intervention is detected by transistor or current
regulation (depending of the booster variant).
2 Only control logic protection

DALCNET S.r.l, Registered office: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
Headquarters: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
VAT: IT04023100235 – Tel. +39 0444 1836680 - www.dalcnet.com – [email protected]
 DLX1224 multi channel
CASAMBI Made in Italy
Rev. 11/07/2023
Device Manual Pag.4 / 6

➢ REFERENCE STANDARDS
EN 61347-1 Lamp controlgear - Part 1: General and safety requirements
EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
EN 61547 Equipment for general lighting purposes - EMC immunity requirements
EN 50581 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of
hazardous substances

➢ TECHNICAL SPECIFICATIONS
Variants
Constant current Constant voltage
Supply voltage DC min: 10.8 Vdc .. max: 26.4 Vdc
Output voltage min: Vin/4 - max: Vin-0,9V =Vin
Input current max 2A max 10A
Variant 350 mA Variant 500 mA
max 1,4 A max 2 A
Output current 350mA/ch 500mA/ch max 5 A/ch max 10 A total 3
total total
1ch max 4ch 1ch max 4ch
@12V 4,2W/ch 16,8 W 6W/ch 24 W 60W/ch 120 Wmax
Nominal power 4
@24V 8,4W/ch 33,6 W 12W/ch 48 W 120W/ch 240 Wmax
Power loss in standby mode <500mW <500mW
Type of Load R-L-C R
Thermal shutdown5 150°C -
D-PWM dimming frequency 600 Hz 6
D-PWM resolution 833 Step 6
Operating frequencies 2,400…2,483GHz 6
Maximum output power 4dBm 6
Storage temperature min: -40 max: +60 °C
Ambient temperature min: -10 max: +40 °C
Wiring 2.5mm2 solid – 1.5mm2 stranded – 30/12 AWG
Wire preparation length 5,5 – 6,5 mm
Protection grade IP20
Casing material Plastic
Packaging unit (pieces/unit) Single Carton Box 1pz
Mechanical dimension 88 x 54 x 25 mm
Packaging dimension 106 x 59 x 36 mm
Weight 80g

3
For the voltage version the device provides max 10A (Itot= IL1 + IL2 +IL3 +IL4). Each channel provides max 5A.
4
Maximum value, depends on the ventilation conditions.
5
Thermal Protection on the output channel in case of high temperature. The thermal intervention is detected by current
regulation (depending of the booster variant).
6
The values depend on the configuration of the Casambi module.
DALCNET S.r.l, Registered office: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
Headquarters: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
VAT: IT04023100235 – Tel. +39 0444 1836680 - www.dalcnet.com – [email protected]
 DLX1224 multi channel
CASAMBI Made in Italy
Rev. 11/07/2023
Device Manual Pag.5 / 6

➢ INSTALLATION

Push Buttons N.O. (*)

PROFILES: DIMMER TUNABLE WHITE RGB RGBW

DLX4-CBM-W DLX4-CBM-TW DLX4-CBM-RGB DLX4-CBM-RGBW
DLX4-CBM-DIM TO WARM DLX4-CBM-RGB+W

L1- = Indirect light control

L2- = Direct light control

PROFILES: DIMMER
DLX4-CBM-2CH DIRECT/INDIRECT

*For the control with the Push Buttons N.O. see the documentations in the website: https://support.casambi.com/support/home.
Note: For the length of the cables see the Technical Note

DALCNET S.r.l, Registered office: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
Headquarters: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
VAT: IT04023100235 – Tel. +39 0444 1836680 - www.dalcnet.com – [email protected]
 DLX1224 multi channel
CASAMBI Made in Italy
Rev. 11/07/2023
Device Manual Pag.6 / 6

➢ TECHNICAL NOTE:
Installation:
• Installation and maintenance must be performed only by qualified personnel in compliance with current regulations.
• The product must be installed in a vertical or horizontal position with the cover / label upwards or vertically; Other positions are not permitted. It is not
permitted to bottom-up position (with the cover / label down).
• Keep separated the circuits at 230V (LV) and the circuits not SELV from circuits to low voltage (SELV) and from any connection with this product. It is
absolutely forbidden to connect, for any reason whatsoever, directly or indirectly, the 230V mains voltage to the bus or to otherparts of the circuit.
Power supply:
• For the power supply use only a SELV power supplies with limited current, short circuit protection and the power must be dimensioned correctly. In
case of using power supply with ground terminals, all points of the protective earth (PE = Protection Earth) must be connected to a valid and certified
protection earth.
• The connection cables between the power source "low voltage" and the product must be dimensioned correctly and they should be isolated from every
wiring or parts at voltage not SELV. It is recommended to use double insulated cables.
• Dimension the power supply for the load connected to the device. If the power supply is oversized compared with the maximum absorbed current,
insert a protection against over-current between the power supply and the device.
• For the constant current output, the voltage of LED module (Vf) must be less of 5V at the voltage of power supply.
Command:
• The length of the connection cables between the local commands (N.O. Push button or other) and the product must be less than 10m; the cables must
be dimensioned correctly and they should be isolated from every wiring or parts at voltage not SELV. It is recommended to use shielded and twisted
cables.
• All the product and the control signal connect at the local command (N.O. Push button or other) must be SELV (the devices connected must be SELV or
supply a SELV signal)
Outputs:
• The length of the connection cables between the product and the LED module must be less than 10m; the cables must be dimensioned correctly and
they should be isolated from every wiring or parts at voltage not SELV. It is recommended to use shielded and twisted cables.

WARNING: For optional functionality of the Bluetooth signal, do not put the device into metal or aluminium boxes and do not shield the device.
As any other Bluetooth product, should not be placed in a metal enclosure or next to large metal structures. Metal will effectively block all radio signal which
are crucial to the operation of the product.

➢ MECHANICAL DIMENSIONS:

DALCNET S.r.l, Registered office: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
Headquarters: Via Lago di Garda, 22 – 36077 Altavilla Vicentina (VI) – Italy
VAT: IT04023100235 – Tel. +39 0444 1836680 - www.dalcnet.com – [email protected]