Scribd
Upload
25 views3 pages

Cnmatrix Link Aggregation Parameters and Commands

Uploaded by

Isabel Campoverde
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views3 pages

Cnmatrix Link Aggregation Parameters and Commands

Uploaded by

Isabel Campoverde
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

cnMatrix Link Aggregation Parameters and

Commands
Commands Description CLI Mode
lacp system-priority <0-65535> Configures the LACP priority. Global Configuration
lacp system-identifier Configures the unicast MAC address value. Global Configuration
<aa:aa:aa:aa:aa:aa>
lacp port-priority <0-65535> Configures the LACP port priority. Interface Configuration
(Physical Interface)
lacp port-identifier <1-65535> Configures the port identifier. Interface Configuration
(Physical Interface)
channel-group <channel-group- Adds the port as a member of the specified port Interface Configuration
number(1-65535)> Mode { on | channel that is already created in the switch. (Physical Interface)
active | passive }
Available options:
 <channel-group-number(1-65535)> -
Adds the port as a member of the
specified port channel.
 active - Starts LACP negotiation
un-conditionally.
 passive - Starts LACP negotiation
only when LACP packet is received
from peer.
 on - Forces the interface to channel
without LACP.
lacp wait-time <0-10> Configures the LACP wait-time for an interface. Interface Configuration
(Physical Interface)
lacp timeout {long | short } Configures the LACP timeout period. Interface Configuration
Available options: (Physical Interface)
 long - Configures the LACP timeout
period as 90 seconds.
 short - Configures the LACP
timeout period as 3 seconds.
lacp rate {normal | fast } Configures the LACP rate. Interface Configuration
Available options: (Physical Interface)
 normal - LACP PDU should be
received every 30 seconds and the
timeout value (no packet is
received from peer) is set as 90
seconds.
 fast - LACP PDU should be
received every 1 second and
timeout value is set as 3 seconds.
lacp admin-key <(Admin Key)1-65535> [Mode Configures the LACP actor admin key and LACP Interface Configuration
{active | passive}] Mode for a port. (Physical Interface)
Available options:
 admin-key - Configures the LACP
actor admin key that is used while
port participates in dynamic
aggregation selection.

Copyright 2018 Cambium Networks. All rights reserved. 1


Commands Description CLI Mode
 [Mode {active | passive}] - active -
Starts LACP negotiation un-
conditionally / passive - Starts
LACP negotiation only when LACP
packet is received from peer.
port-channel max-ports <integer (2-8)> Configures the maximum number of ports that Interface Configuration
can be attached to a port channel. (Physical Interface)
debug lacp [ { init-shutdown | mgmt | data | Enables the tracing of the LACP as per the Privileged EXEC
events | packet | os | failall | buffer | all } ] configured debug levels.
Available options:
 init-shutdown - Generates debug
statements for init and shutdown
traces.
 mgmt - Generates debug
statements for management traces.
 data - Generates debug
statements for data path traces.
 events - Generates debug
statements for event traces.
 packet - Generates debug
statements for packet dump traces.
 os - Generates debug statements
for OS resource related traces.
 buffer - Generates debug
statements for buffer related traces.
 all - Generates debug statements
for all kinds of traces.
debug etherchannel {[all] [detail] [error] [event] Enables the tracing of the link aggregation Privileged EXEC
[idb]} module as per the configured debug levels.
Available options:
 all - Generates debug statements
for all kinds of traces.
 detail - Generates detailed debug
statements for traces.
 error - Generates debug
statements for all failure traces.
 event - Generates debug
statements for event traces.
 idb - Generates debug statements
for interface descriptor block traces.
show etherchannel <channel-group-number(1- Displays etherchannel information for the Privileged EXEC
65535)> { detail | load-balance | port | port- specified port-channel groups created in the
channel | summary | protocol } switch.
Available options:
 detail - Displays detailed
Etherchannel information.
 port - Displays the status of
protocol operate Mode and port
details for each group.
 port-channel - Displays the admin
and operational status of port
channel module, and port channel
details.
 protocol - Displays the status of
protocol operate Mode for each

Copyright 2018 Cambium Networks. All rights reserved. 2


Commands Description CLI Mode
port-channel group.
 summary - Displays the admin and
operational status of port channel
module, number of channel groups
used, number of aggregators,
group IDs, and port channel ID,
status of protocol operate Mode
and member ports for each group.

show etherchannel Displays etherchannel information for port- Privileged EXEC


channels created in the switch.
show interfaces [<interface-type> <interface-id> Displays etherchannel details for all aggregated Privileged EXEC
] etherchannel ports and port channels.
show lacp [<port-channel(1-65535)>] { counters Displays LACP counter / neighbor information for Privileged EXEC
| neighbor [detail] } all port-channels.
Available options:
 <port-channel(1-65535)> - Displays
LACP counter / neighbor
information for the specified port-
channel.
 counters - Displays the LACP
counter information.
 neighbor [detail] - neighbor -
Displays LACP neighbor
information.

Copyright 2018 Cambium Networks. All rights reserved. 3

You might also like