DS2710

ROCK SUPPORT
BOLTER
TECHNICAL SPECIFICATION

Sandvik DS2710 is a one-man-operated electro- KEY FEATURES

hydraulic rockbolter for rock reinforcement in Hydraulic rock drill 1 x H200 (10 kW)
underground mines with small and medium cross Bolting head 1 x TUC
sections. The operator works from supported ground Bolting boom 1 x B26B
while protected under a FOPS-certified canopy Bolt length 5’....8’ (1 525.....2 440 mm)
structure. Mechanization of the bolting process ensures T-section width in turning 3 030 mm (TUC5)
efficient, constant and durable rockbolt integrity. Tramming width 1 600 mm
Tramming height 2 070 mm / 2 750 mm
Built from proven and reliable components, Sandvik Tramming length 9 000 mm (TUC5)
DS2710 is designed for high availability. At its core is Operating weight 11 500 kg depending on option
the well-known Sandvik hydrastar 200 rockdrill, which
enables fast performance.

Versatility is also one of the rockbolter’s key

characteristics. Sandvik DS2710 can install splitset and
mechanical rockbolts ranging in length from 1.5 to 2.4
meters (5 to 8 feet).

1. SANDVIK DS2710 - ROCK SUPPORT BOLTER

HYDRAULIC ROCK DRILL ELECTRIC SYSTEM
Type of rock drill H200 (TS2-234) Standard voltages 380 - 690 V (± 10%)
Percussion power 10 kW Frequency 50 - 60 Hz
Percussion pressure Max. 200 bar Total input power 70 kW
Percussion rate 40 - 65 Hz Main switch gear NSX160N/38
Rotation speed Max. 300 rpm (OMS125) IP classification Specification TS2-132
Rotation torque Max. 420 Nm (OMT125) Starting method Star delta starter 380 - 575 V
Hole size 33 - 41 mm Automatic cable reel CR with tramming interlock
Recommended rod R32 - H25 - R25 Cable reel remote control At the operator station
Shank adapter R32 (female) Phase relay protection Standard
Weight 95 kg Front working lights
4 x 48 W LED (24 V)
(combined working and driving)

BOLTING HEAD Rear tramming light 2 x 48 W LED (24 V)

Type of bolting head TUC5 TUC6 TUC7 TUC8 Manual search light 1 x 70 W (24 V)
Bolt length mm 1 525 (5’) 1 830 (6’) 2 135 (7’) 2 440 (8’) Operator station light 1 x 5 W LED (24 V)
Bolt carousel capacity 9 to 15 rockbolts Amber flashing light LED (24 V)
Steel length mm 1 870 2 175 2 475 2 795 Batteries 2 x 12 V, 80Ah
Total length (drilling) mm 2 700 3 000 3 310 3 530
Total length (bolting) mm 2 925 3 355 3 655 4 150 AIR AND WATER SYSTEM
Hole depth mm 1 680 1 980 2 290 2 550 Flushing of holes By water
Total weight kg 1 110 1 150 1 180 1 230 Water booster pump type WBP1 (3 kW)
Water pump capacity 33 l/min at 15 bar
BOOM Water pump inlet pressure 2 - 5.4 bar
Type of boom B26B (TS2-206) Flushing water pressure 10 - 15 bar
Boom extension 1 200 mm Shank lubrication device SLU-1 (air / oil mist)
Boom weight 1 330 kg Air compressor CTN10 (1.0 m³/min, 7 bar)
Bolting head 360° Rock drill oil consumption 100 g/h
Rock drill air consumption 250 l/min
HYDRAULIC SYSTEM
Power pack HPP355 (1 x 55 kW) OPERATOR’S SAFETY CANOPY
Operating principle Direct hydraulic control Canopy certification FOPS (ISO 3449)
Percussion pump 45 cc (triple) High position : 2 750 mm
Unit height in tramming (FOPS)
Rotation pump 45 cc (triple) Low position : 2 535 mm
Filtration (pressure / return) 10 µ / 10 µ Operator station: 102 dB(A)
Sound pressure level EN 16228
Oil tank volume 200 liters Emitted: 124 dB(A)
Filling pump for hydraulic oil Electric For working / tramming
Operator’s seat
Cooler for hydraulic oil OW30 oil-to-water (1 x 30 kW) Adjustable with seat belt

Level indicator and automatic

Low oil level indication
switch-off

DRILLING CONTROL SYSTEM

Type of control system IBC-B, hydraulic
Adjustable full power
Power control
Adjustable collaring power
Anti-jamming control Adjustable anti-jamming pressure
Rotation control Adjustable rotation speed
MySandvik insight Remote monitoring system

2. SANDVIK DS2710 - ROCK SUPPORT BOLTER

CARRIER OPTIONAL FEATURES AND PACKAGES
Type of carrier MERCURY (frame steered) Bolting head
Carrier articulation ± 35º *TUC bolting head length TUC5, TUC6, TUC7, TUC8
Rear axle oscillation ± 6º Bolting option
Ground clearance 295 mm *Bolting alternatives GCR, GCC, S, M
*“In the hole” resin cartridges For GCR bolting system (TS2-290)
Diesel engine Deutz TCD3.6 L4EDG, 74 kW, Tier 3, China III
injection
Exhaust catalyzer Standard Screen handler On the main boom (TS2-355)
Transmission Hydrostatic, automotive Bolt carriage Max. length 8’ bolt, 50 pcs (increase
Wheel motor 4 x radial piston the width on the machine)
Tires 10.00 - 15 Drilling control system
Service brakes Hydrostatic and positive braking MySandvik productivity Remote monitoring system

Parking and Cleaning system

SAHR fail safe type wet disc brakes
emergency brakes HP system with reel Up to 180 bar (TS2-343)

8 km/h (Horizontal) Electric system

Tramming speed
4 km/h (14%=1:7=8°) *Multi-voltage 550 - 1 000 V (50 / 60 Hz)
*Electric cables Specification TS2-121
Gradeability / sideways tilt Max. 15° / 5°
Ground fault and overcurrent VYK
Fuel tank 60 liters protection
2 x Telescopic (front) Battery jump start Optional
Carrier stabilization
2 x Vertical (rear) Air and water system
Brake release Manual hand pump *Air mist flushing kit For external air and water supply
(IP5 air cleaner included)
Centralized greasing system Carrier *End of hole air flushing 1 x 60 liters air receiver
Hand held fire extinguisher 1 x 6 kg, Type ABC Hooks for water / air hose 2 hooks
Tramming alarm Standard Greasing system
Colour scheme Sandvik Manual system Greasing unit with pump, reel and
nozzle (Spec. 5-2110)
2 x Operator’s manual
2 x Maintenance manual
Operator’s safety canopy
Documentation 2 x Technical manual (in English only)
Operator protection Safety grill
2 x Parts manual (in English only)
2 x USB sticks of manuals (PDF files) Fire suppression system
Manual system Ansul, 6 nozzles (Spec. 5-9800)

Carrier
*Foam filled tires 4 pcs
Wheel chocks and holders 2 Sets

Extra items
Berg plug and socket
Spare rock drill H200
Spare wheel assembly Standard or foam filled tires
Special tools for rock drill Specific tools (Spec. 2-110S)
Rock drill inflating box (2-9110)
Tools and pressure test box (2-9100)
Documentation Extra manuals
Package: Country specific SAS (cluster lights, reflective taps
options and wheel chocks and holders)
*Package: Harsh water Advanced (TS2-049)

*) Replaces standard feature

SANDVIK DS2710 - ROCK SUPPORT BOLTER

 A
B

C 5 050
1 550
SANDVIK 4 200
DS2710

4 940

3 050 3 750
Up to

TS2-188:05/ENG/METRIC © Sandvik Mining and Rock Technology 2019 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
3 888
7 050
4 600
5 200
1 200
A (Maxi) B (Optimum) C (Mini)
DS2710 (TUC5) mm 5 800 4 950 2 925
DS2710 (TUC6) mm 5 950 5 100 3 355 All dimensions in mm

DS2710 (TUC7) mm 6 100 5 250 3 655

DS2710 (TUC8) mm 6 300 5 450 4 150

SANDVIK

DS2710

150 2 090 2 350 1 600

5 150
8 650 2 450

FOPS MAXI

FOPS MINI
C R2
2 750
2 530 SANDVIK

2 070 R1
DS2710
1 810 1 480 35°

L
Total length (L) Radius (R1) Radius (R2) T-cross (C)
DS2710 (TUC5) mm 9 000 2 900 5 430 3 030
DS2710 (TUC6) mm 9 200 2 900 5 600 3 200
DS2710 (TUC7) mm 9 400 2 900 5 770 3 370 All dimensions in mm
DS2710 (TUC8) mm 9 600 2 900 5 945 3 550

Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.

ROCKTECHNOLOGY.SANDVIK

4. SANDVIK DS2710 - ROCK SUPPORT BOLTER