Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    IPE - 400 Konstrusione

    Uploaded by

    egzonibaraliu
    This document provides detailed cross-sectional properties for an IPE 400 steel beam including its geometry, areas, moments of inertia, radii of gyration, elastic and plastic section moduli, shear areas, torsion properties, warping properties, and stability factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    IPE - 400 Konstrusione

    Uploaded by

    egzonibaraliu
    18 views2 pages
    This document provides detailed cross-sectional properties for an IPE 400 steel beam including its geometry, areas, moments of inertia, radii of gyration, elastic and plastic section moduli, shear areas, torsion properties, warping properties, and stability factors.

    Original Description:

    Gjjdfgchvuggjfg5nfjguvudyfyihhkkgu

    Original Title

    IPE_400 konstrusione

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides detailed cross-sectional properties for an IPE 400 steel beam including its geometry, areas, moments of inertia, radii of gyration, elastic and plastic section moduli, shear areas, torsion properties, warping properties, and stability factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views2 pages

    IPE - 400 Konstrusione

    Uploaded by

    egzonibaraliu
    This document provides detailed cross-sectional properties for an IPE 400 steel beam including its geometry, areas, moments of inertia, radii of gyration, elastic and plastic section moduli, shear areas, torsion properties, warping properties, and stability factors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

     Cross-Section Properties

    IPE 400
    Geometry
    IPE 400
    Depth h 400.0 mm
     DIN 1025-5:1994-03; Euronorm 19-57
    Width b 180.0 mm  --
    Web thickness tw 8.6 mm 180.0

    Flange thickness tf 13.5 mm

    13.5
    21.0
    Inner depth between flanges hi 373.0 mm

    Root fillet radius r1 21.0 mm


    Depth of straight portion of web d 331.0 mm

    400.0
    Sectional Area y

    Sectional area A 84.46 cm

    8.6

    Bending
    Area moment of inertia about y-axis Iy 23128.00 cm
    Area moment of inertia about z-axis Iz 1318.00 cm
    z
    Polar area moment of inertia Ip 24446.00 cm
    [mm]
    Radius of gyration about y-axis iy 165.5 mm

    Radius of gyration about z-axis iz 39.5 mm

    Polar radius of gyration ip 170.1 mm

    Statical moment of area about y-axis max Sy 653.60 cm


    Statical moment of area about z-axis max Sz 55.07 cm
    Elastic section modulus about y-axis Wy 1156.00 cm
    Elastic section modulus about z-axis Wz 146.40 cm

    Shear
    Shear area in y-direction Ay 40.50 cm
    Shear area in z-direction Az 33.17 cm

    Torsion
    Torsional constant It 50.41 cm
    Secondary torsional constant It,s 14705.20 cm
    Section modulus for torsion Wt 37.34 cm

    Warping
    Warping ordinate with respect to shear center max ω 173.92 cm
    Warping constant with respect to shear center Iω 482890.00 cm
    Warping radius of gyration with respect to shear center iω 44.4 mm

    Warping section modulus with respect to shear center Wω 2776.43 cm


    Warping statical moment with respect to shear center max Sω 1056.59 cm

    Stability
    c/t ratio of flange c/tf 4.790 --

    c/t ratio of web c/tw 38.500 --

    Plasticity
    Plastic section modulus about y-axis W pl,y 1307.55 cm
    Plastic section modulus about z-axis W pl,z 229.00 cm
    Plastic warping section modulus with respect to shear W pl,ω 4226.38 cm
    center
    Plastic shape factor about y-axis αpl,y 1.131 --

    Plastic shape factor about z-axis αpl,z 1.564 --

    Plastic shape factor with respect to shear center αpl,ω 1.500 --

    Plastic shear area in y-direction Apl,y 48.60 cm


    Plastic shear area in z-direction Apl,z 33.24 cm
    Plastic limiting normal force Npl 1985.417 kN

    Plastic limiting shear force in y-direction Vpl,y 659.392 kN


    Plastic limiting shear force in z-direction Vpl,z 450.978 kN

    Plastic limiting bending moment about y-axis Mpl,y 307.27 kNm

    Plastic limiting bending moment about z-axis Mpl,z 53.82 kNm

    Other
    Weight G 66.3 kg/m
    Surface area per unit length Am 1.467 m /m
    Volume V 8446.00 cm /m
    Section factor Am/V 173.692 1/m

    Web area Aw 32.08 cm


    Flange hole diameter d0 26.0 mm
    Flange hole spacing w 106.0 mm

    You might also like