Rotor Vane Experiment
Rotor Vane Experiment
Course Tutor:
Submitted By:
1
Abstract
Heat transfer takes places in three modes such as conduction, convection and radiation. The
former two require medium for heat transfer but the later one does not require. This succinct
report provides information about rotating vane experiment i.e. application of implementation of
convection heat transfer. First of all project methodology is described step by step explained for
fabrication process and in last testing is performed. The total cost of this prototype project ranges
about 9 to 10 USD dollars. However the cost based on the dimension of the prototype. It is
concluded that as the air get warmer around the candles it exerts a fore on the vanes which
results in rotating of the vane continuously.
2
Table of Contents
Report Title: .................................................................................................................................... 1
Abstract ........................................................................................................................................... 2
Convection .................................................................................................................................. 6
Radiation ..................................................................................................................................... 9
Design Methodology....................................................................................................................... 9
Conclusion .................................................................................................................................... 15
References ..................................................................................................................................... 15
3
Table of Figures
4
Project scope
The current project is related to application of convection heat transfer & its application. This
methodology may be used to scientific fairs, exhibits, etc. Additionally, lab engineers may utilize
this model in their science lab or classroom to show students how convection currents affect the
air. The main theoretical reason about the testing is that when the air around the lit candles
becomes hotter and lighter, which forces the cold air to rise and sink as the candles burn. The
vane rotates as a result of this action. As a result, it shows that convection currents are flowing
upward. The figure shows the prototype of the proposed project as shown below,
Introduction
Heat transfer must happen whenever there is a temperature differential inside or between
mediums. The energy that is in transition is heat, and a body can never contain it. Heat Transfer
deals with;
Conduction
Convection
Radiation
5
Figure 2 Showing modes of heat transfer[1]
Convection
It is the method of transferring energy that combines the forces of conduction and fluid motion to
move energy from a solid surface to a nearby moving liquid or gas. The amount of heat
transmission by convection increases with fluid velocity [3].
6
Figure 4 Convection heat transfer equation
As it is well known that in a solid surface phenomena of conduction heat transfer takes please,
also in this mode of transfer there is no presence of bulk of fluid motion. Heat transmission
between the fluid and the solid surface is improved by bulk motion of the fluid, but calculating
heat transfer rates becomes more difficult as a result. If a fluid is pushed to flow across the
surface by an outside force, such the wind, a pump, or a fan, it is referred to as forced
convection.
7
On the other hand, when buoyancy forces resulting from temperature variations in the fluid
generate density changes, convection is referred to as natural (or free) convection. The dynamic
and complex mechanism of convection heat transfer controls the flow of thermal energy in
fluids. A thorough grasp of convection is crucial for both simulating Earth's climate and
designing common appliances. Scientists and engineers are still looking for novel ways to
harness and maximize convection for a variety of uses, from improving industrial processes to
solving global energy and environmental concerns.
8
It is crucial to keep the fluid surrounding the heated surface at the proper temperature
difference. Convective heat transmission may be maximized by keeping an eye on and
modifying these temperature gradients. When putting these techniques into practice, it's
important to balance cost, practicality, and efficiency while also giving considerable
thought to the particular application.
Radiation
In contrast to conduction and convection, radiation transfers heat without the use of a medium. It
is essential to the energy balance of many systems, from the cosmos to daily life, and includes
the transmission of electromagnetic waves, usually in the form of infrared radiation.
Design Methodology
In this project we have implemented the following project methodology to meet the requirements
of the projects First of all a problem based on heat transfer is identified such as rotary vane
conviction heat experiment. A methodical and structured approach to organizing, planning, and
carrying out a project is known as project design methodology. Design parameter does not
require any special mathematical calculations because it’s just a simple prototype. Analytical
design includes hypothetical parameters such as diameter of rotary vane which is 15 cm chosen.
9
Design Analytical
Problem Parameters Design
1×Card-board
Card board is used for making surrounding boundary around the candle, for this first of all it is
marked in into different parts and then it’s folded,
5×Candles
The main thing of this project is candles which held helps to rise the temperature of the air,
making it warm due to which air rises above and rotates the fan / vanes. The hotter the air the
more is the speed of the rotating fan because it the flame of candles creates turbulent motion and
it well known that due to turbulent heat transfer increases, the same is applied here
10
1×Paper cup & 50-100 grams of rice
The purpose of this cup is nothing else to hold the pencil, above it rotating fan / vanes are places.
The cup is filled with rice which may 50 or 100 grams depending on the size of the available
cup. However while using the cup make sure that there is no hole inside it because rice’s will fell
down causing the pencil to imbalance.
1×Led pencil
11
1×Simple A4 paper
This is also main part of this project, A4 paper is used for making rotating fan / vanes. In order to
make the vanes, it is properly divided into six equal number of parts i.e. 60 degree then using the
available scissor or cutter it cut down.
1×Scissor
The scissor is just used for cutting the paper, however the same can be done with available
cutter.
1×Ruler
Ruler is used for dividing the A4 page into six equal number of parts. The length of ruler should
be at least 150cm because the circle which we have to draw to make the vanes is of 15cm.
12
Figure 13 A ruler for measurement
1× Matches
The match box is used in order to lit the candle, while using this it is necessary to make sure that
no explosive material or volatile is being placed around prototype.
Design steps
i. Take a board, draw a 10cm vertical line on the cardboard, and then draw a 40cm
horizontal line from the starting point. After this again draw a 10cm vertical line. Now
draw 20cm horizontal and then again 10cm vertical line as shown below in schematic,
10cm
20cm
40cm
13
ii. Now take a simple A4 paper draw a circle of 15cm, divide the circle into 6 equal number
of parts i.e. 60 degree, and again draw a circle of about 2cm at the center.
iii. Take a scissor, cut the circle into six equal parts i.e. the lines which we have drawn
previously, after cutting this it will look like a impeller vanes
iv. Fold the blades in a concave shape and balance, by putting it on the led pencil.
v. Take the led pencil, put it into the cup filled with rice till its neck
vi. Now take at least five or six number of candles and lit it on the board around the cup into
equally spaced
vii. By suing match stick lit sthe candles, however by doing this make sure that no explosive
material or volatile is around this project prototype
viii. Now cover the litter candles with the card board which we have cut previously
ix. We can observe that fan / vanes should start to rotate the physics behind it is convection
currents
x. As the candles gets warmer and warmer the air around it rises above, as the air rises
above it exerts a force on the fan / vanes which tends to make it rotate. If you balance the
vanes it will starts to rotate continuously
Project Plan
The proposed project is divided into the following main sub parts in order to proceed the smooth
process of submission.
Year 2023
December
Tasks
Week-1 Week-2 Week-3 Week-4
Project
selection
Analytical
design
Fabrication
Analysis
Final testing
Submission
Figure 15 Project Gantt Chart
14
Proposed budget
This project is economical in terms of fabrication and also fulfills the requirement of application
of convection heat transfer. The major parts of the project and its cost is tabulated below
[5],[6],[7],
Conclusion
This report is about the prototype project an application of convection heat transfer. First of all
we have described the important steps of the fabrication process and then testing is performed to
check the implementation of laws of the heat transfer. The total cost of the project is about 9 to
10 USD dollars based on the given porotype apparatus. It is clear as the density of air decreases
then it exerts a forces on paper vanes which tends to produce the phenomena of convection heat
transfer.
References
[1] Modes of Heat Transfer - Chemical Engineering World. (n.d.). Retrieved December 4,
2023, from https://chemicalengineeringworld.com/modes-of-heat-transfer/
[2] Modes of Heat Transfer - The Engineering Concepts. (n.d.). Retrieved December 4, 2023,
from https://www.theengineeringconcepts.com/modes-of-heat-transfer/
[3] What Is Heat Transfer? Conduction, Convection, Radiation and FAQs. (n.d.). Retrieved
December 4, 2023, from https://byjus.com/physics/heat-transfer-conduction-convection-and-
radiation/
15
[4] Radiation - Types, Ionizing and Non-Ionizing Radiation, Nuclear Radiation, Radiation
Pressure, FAQs. (n.d.). Retrieved December 4, 2023, from https://byjus.com/physics/radiation/
[5] Juvale Corrugated Cardboard Sheets - 24-Pack Flat Cardboard Sheets, Cardboard Inserts
for Packing, Mailing, Crafts - Kraft Brown, 12 x 12 Inches : Amazon.in: Home & Kitchen. (n.d.).
Retrieved December 4, 2023, from https://www.amazon.in/Corrugated-Cardboard-Sheets-24-
Pack-Inserts/dp/B079QRBBFP
[6] Wanna Party Magic Relighting Birthday Candles (Multicolour) : Amazon.in: Home &
Kitchen. (n.d.). Retrieved December 4, 2023, from https://www.amazon.in/Birthdaygiftwala-
Magic-Relighting-Birthday
[7] 3M Scotch Scissors | 6" Multipurpose | Comfort Grip Handle and Stainless Steel Blades |
Paper, Photos, Crafts : Amazon.in: Office Products. (n.d.). Retrieved December 4, 2023, from
https://www.amazon.in/Scotch-6-inches-Stainless-Multi-Purpose-Scissor
16