Daewoo-Partsnic (Screw) PU Series
Daewoo-Partsnic (Screw) PU Series
Daewoo-Partsnic (Screw) PU Series
■ Features
• Screw terminal type
• Ideal for inventer, computer
• Large allowable ripple current
• High reliablity for continuous operation
• Computer grade, Large capacity.
• Load life of 2000 hours at 105˚C
■ Specifications
Item Performance Characteristics
Operating temperature range -40˚C ~ +105˚C
Rated working voltage range 10V ~ 250V
_
Nominal capacitance range 220µF ~ 470000µF, 10 ~ +50%(at 20˚C, 120Hz)
D.C Leakage current(at 20˚C) The following specifications shall be satisfied when the rated voltage is applied for the required
time.
l ≤ 0.02CV or 5mA (5 min), whichever is less.
Where l=Leakage current(µA) C=Nominal capacitance(µF) V=Rated voltage(V)
Tan (max., at 20˚C, 120Hz) W.V(V) 10~16 25 35 50 63~100 160~
220~10000 — 0.35 0.30 0.25 0.15 0.15
15000~47000 0.50 0.40 0.40 0.35 0.30 —
68000~100000 0.75 0.50 0.50 0.40 — —
150000~220000 1.00 1.00 — — — —
330000~ 1.50 — — — — —
Characteristics W.V(V) 10~16 25~35 50~100 160~250
at low temperature(max.) Z-25˚C/Z20˚C 4 3 2 2
(impedance ratio at 120Hz) Z-40˚C/Z20˚C 12 6 4 8
Load life After applying rated working voltage for 2000 hours at +105˚C and then being stabilized at +20˚C,
capacitors shall meet following limits.
Capacitance change Within ± 20% of initial measured value
Tan ≤ 200% of initial specified value
Leakage current ≤ Initial specified value
Shelf life After storage for 1000 hours at +105˚C with no voltage applied and then being stabilized at +20˚C,
capacitors shall meet following limits.
Capacitance change Within ± 20% of initial measured value
Tan ≤ 150% of initial specified value
Leakage current ≤ Initial specified value
• Temperature
Temperature ≤45˚C 65˚C 85˚C 105˚C
Factor 3.0 2.6 2.0 1.0
øD C E F
35 12.8 3.0 5.0 1.0
51 21.7 3.0 4.0 1.5
63.5 28.3 3.0 4.0 1.5
76 31.6 3.0 4.0 1.5
89 32.0 3.0 4.0 1.5
87
PU SERIES
STANDARD RATINGS OF PU SERIES
W.V 10(1A) 16(1C) 25(1E) 35(1V) 50(1H) 63(1J)
Cap(µF) Case Size IR(A) Case Size IR(A) Case Size IR(A) Case Size IR(A) Case Size IR(A) Case Size IR(A)
3300 35X50 2.8
4700 35X50 3.0 35X60 3.6
6800 35X50 3.7 35X70 4.1 35X80 4.8
10000 35X50 4.3 35X70 4.9 35X90 5.2 35X100 6.2
15000 35X50 4.0 35X70 5.9 35X90 6.5 35X100 6.2 51X90 8.1
22000 35X50 4.3 35X70 6.0 35X90 6.9 35X120 7.9 51X90 8.1 63.5X100 10.4
33000 35X70 6.4 35X90 7.2 35X120 8.3 51X100 9.6 63.5X100 11.0 63.5X120 13.2
47000 35X90 7.2 35X120 8.0 51X90 9.8 51X120 11.9 63.5X120 13.8 76X120 16.8
68000 35X100 7.7 51X90 10.4 51X120 10.6 63.5X100 13.8 76X120 16.9
100000 51X90 9.6 51X120 12.4 63.5X100 12.5 76X120 16.9
150000 51X120 12.0 63.5X100 13.4 76X120 16.9
220000 63.5X100 14.2 76X100 16.2
330000 76X100 18.8
470000 76X140 20.8
88