Scribd
Upload
25 views3 pages

Shaft Laser Alignment Report Unloader PMP Nov 21

The document discusses laser shaft alignment performed on an unloader pump at an MDF board division. It provides an overview of laser shaft alignment, its benefits, and types of misalignments. Measurement readings are reported before and after alignment for horizontal and vertical angular and parallel offsets, all within tolerable ranges.

Uploaded by

jawadjawad900
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views3 pages

Shaft Laser Alignment Report Unloader PMP Nov 21

The document discusses laser shaft alignment performed on an unloader pump at an MDF board division. It provides an overview of laser shaft alignment, its benefits, and types of misalignments. Measurement readings are reported before and after alignment for horizontal and vertical angular and parallel offsets, all within tolerable ranges.

Uploaded by

jawadjawad900
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SHAFT LASER ALIGNMENT

at
AL NOOR MDF BOARD DIVISION
Activity: Shaft Laser Alignment of Unloader Pump

Customer Name: Al Noor MDF Board Division

Engineer Name: Mr.Rao Jawad / Mr. Laiq Ali

Date: 12th Nov, 2021

Customer Representative: Mr.Adil Rao

Instrument Use: Shaft Laser Alignment (TKSA41)

Report Finalize by: Mohsin Elahi


Shaft Laser Alignment – Overview

Laser Shaft Alignment. Shaft alignment, often called “coupling alignment”, is a process to make
two or more rotating shafts co-linear, or in the same straight line, both vertically and
horizontally.

Shaft Laser Alignment - The benefits

The bottom line is that shaft laser alignment benefits both the operator and the maintenance technician:

➢ Higher Machine Availbility

➢ Higher Machine Reliability

➢ Higher Machine Life

➢ Optimize Machine Spares

➢ Avoid Primary and secondary damagaes

Shaft Laser Alignment Type

➢ Angular misalignment is a state of shafts where the shafts


can be in vertical plan. If the motor shaft is under
an angle with the shafts in vertical position, then it called
angular vertical misalignment..

➢ A parallel misalignment parallel misalignment, the center


lines of both shafts run parallel to one another, but they are
offset.
Report # TA/003/ALN-MDF/003-A

Shaft Laser Alignment – RESULTS


Equipment Name: Unloader Pump (Sunds)

HORIZONTAL:
MisAlignment Type Readings Readings
(Before Alignment) (After Alignment)
0.05mm/100mm 0.03mm/100mm
Angular Offset
Parallel Offset 0.35 -0.20

VERTICAL:
MisAlignment Type Readings Readings
(Before Alignment) (After Alignment)
Angular Offset -0.21mm/100mm -0.07mm/100mm

Parallel Offset -0.19 -0.14

REMARKS:
All Alignment figures are in Range i-e under tolerable ranges. Foundational Improvement
require for more precise readings.

Authourized Signature: Date: 12th Nov, 2021

You might also like