Scribd
Upload
19 views1 page

Danfoss BPHE Corrosion Guide

Uploaded by

Neilor Cruz Paiva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views1 page

Danfoss BPHE Corrosion Guide

Uploaded by

Neilor Cruz Paiva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Brazed Plate Heat Exchanger; Corrosion guide

Valid for water at 20°C

Content Concentration Material


mg/l or ppm AISI 316L Copper
pH <6
6-7,5
7,5-9
>9
Alcalinity HCO₃¯ <70
70-300
>300
Sulphate SO₄²¯ <70
70-300
>300
Alcalinity/Sulphate HCO₃¯/SO₄²¯ >1
<1
Electrical conductivity μS/cm <10
10-500
>500
Ammonium NH₄ <2
2-20
>20
Free chlorine Cl₂ <1
1-5
>5
Hydrogen sulfide H₂S <0,05
>0,05
Free carbon dioxide (aggressive) CO₂ <5
5-20
>20
Nitrate NO₃¯ <100
>100
Iron Fe <0,2
>0,2
Aluminium Al <0,2
>0,2
Manganese Mn <0,1
>0,1

Maximum temperature
Chloride content (Cl¯) 60°C 80°C 120°C 130°C
≤ 10 ppm AISI 304L AISI 304L AISI 304L AISI 316L
≤ 25 ppm AISI 304L AISI 304L AISI 316L AISI 316L
≤ 50 ppm AISI 304L AISI 316L AISI 316L Ti/SMO 254
≤ 80 ppm AISI 316L AISI 316L AISI 316L Ti/SMO 254
≤ 150 ppm AISI 316L AISI 316L Ti/SMO 254 Ti/SMO 254
≤ 300 ppm AISI 316L Ti/SMO 254 Ti/SMO 254 Ti/SMO 254
> 300 ppm Ti/SMO 254 Ti/SMO 254 Ti/SMO 254 Ti/SMO 254

Good resistance
Corrosion may occur when more factors are yellow
Not recommended to use BPHE/MPHE

You might also like