WAVE NEO Manual Revised - Compressed
WAVE NEO Manual Revised - Compressed
WAVE NEO Manual Revised - Compressed
NEW WAVE
WAVE NEO
4. Make sure you connect the watch directly with you app and
not with the phone’s Bluetooth.
Note: To ensure connectivity throughout your journey, make sure the app is allowed to run
in the background of your phone at all times.
SYNCING YOUR SMARTWATCH
TO THE APP
Data Synchronization
• Open the app on your phone
• Make sure your wave neo is connected to the app
• Synchronization will start automatically once you
enter the app interface boAt Wave Neo
Watch Faces
Select more watch faces by tapping on “cloud watch faces” option.
Customize your watch face by adding a photo from your camera or album or
select from the pre-loaded ones.
Note: Make sure your watch and phone are connected via Bluetooth. Do not exit the
downloading interface until it displays 100% downloaded. It may take up to 1 min
to sync the watch face with your app.
NAVIGATING THROUGH THE FUNCTIONS
Sports Modes
Tap on this to access the sports modes on the menu, which include:
Outdoor run, indoor run, outdoor walk, indoor walk, Hiking, Outdoor
cycle, indoor cycle, rowing, elliptical, yoga, basketball, cricket,
strength training, free training.
Tap on your preferred activity to begin.
To pause/resume: short press the side button
To end: short press --> tap on the X icon to end the activity
Notes: *All records will be available on the app if you keep it
synchronized.
*A minimum of 1 minute of any activity is required for the watch to
record.
*The touch screen will not function when exposed to water. When your
watch does get wet, wipe the surface with a soft cloth before using it.
*Make sure the maximum depth of water is 1m & maximum time of
exposure in water is 10 minutes.
Notifications
Tap on this to view your notifications.
Faizan: How are you?
Turn the feature on from the app first to receive notifications on your
watch.
Sachin: Great!!!
Sleep records
Tap on the icon to review the sleep data of the previous night.
Once the asleep criteria are met, your watch will start recording from
8 pm at night to 10 am in the morning the next day.
Once you lie down and the watch detects no movement for 30
minutes, it will start recording your sleep. It will stop recording if it
detects excessive movement.
You can check the data on the app only after the awake criteria is
met.
Notes:
*For accurate sleep data recording, the asleep criteria have to be met
which includes limited movement, wrist positions and angles, and more.
*The awake criteria will be met only after it records some noticeable
movement.
Stress Monitoring
Wear the watch on your wrist and tap on the icon to measure stress
levels. Try to stay still.
The stress monitor tracks your heart rate to track levels of stress. The
watch calculates your stress levels using a 1-minute heart rate
variability (HRV) test. The higher the value, the higher the stress rate.
Here’s what the data indicates:
0-30: Relaxed
30-60: Normal
60-80: Medium
80> is considered to be dangerous.
When your HRV is higher than usual, use the guided breathing modes
to take a minute and relax.
Note: It is recommended to record your stress levels every day before
exercising. Preferably at the same time, and under the same conditions
for accurate measurements.
*This measurement is for reference purposes only, and not for medical
grade use.
Weather
Enable this from the app to get weather updates.
Flashlight
Tap on it to turn your dial into a flashlight.
Find My Phone
Tap on the icon to make your phone ring. Make sure the app and
phone are connected.
Camera Control
Tap on this icon to use the remote camera control feature.
Swipe Left
Swipe left for shortcut to view heart rate data, sleep data, music
control, weather, activity record, and stress data.
Settings
Set screen settings (Watch faces, screen time out) , Night mode, DND, Raise to wake
gesture, brightness, system (power off, reset, reboot), about from the settings menu.
TURNING THE WATCH OFF
Long press the side button to switch off the watch.
PRODUCT PARAMETERS:
Model Watch Wave Neo
Screen Type HD display
Battery Capacity 220 mAh
Net weight 35g
Bluetooth version BLE5.1
Working temperature 0-45°
Charging time up to 2h
Working time up to 7 days
Maximum transmit power 4dBm
Frequency band 2402-2480Mhz
Maintenance:
Regularly clean your wrist and the strap of the smartwatch, especially after
sweating during exercise or being exposed to substances such as soap or
detergent, which may get stuck on the other end of the product.
Do not wash the strap with a household cleanser. Please use soap less
detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
For spots or stains that are not easy to remove, scrub the area with rubbing
alcohol and then follow the above procedure.
Health Warning
• If you are wearing a pacemaker or other implanted electronic devices, please consult your
doctor before using the heart rate monitor of the watch.
• The optical heart rate sensor will glow green and flash. If you suffer from epilepsy or are
sensitive to blinking light sources, please consult your physician before wearing this device.
• The device tracks your daily activities through sensors. This data is intended to tell you
about your daily activities such as steps, sleep, distance, heart rate and calories, but may not
be completely accurate.
•
The device accessories, heart rate sensor, blood pressure, oxygen level monitor, and other
relevant data is designed for fitness and not for medical purposes. They are not applicable
to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The
heart rate and blood pressure data is for reference only. We’re not responsible for any
deviation in data.
• Avoid wearing the watch too tightly. Make sure you keep your skin dry - the area that
comes in contact with the watch. If symptoms such as redness or swelling appear on your
skin, immediately stop using the watch and consult the doctor.
Things to keep in mind
• Sync data every day to avoid data loss.
• Water Resistance will not work for seawater, acidic and alkaline solutions, chemical
reagents and other corrosive liquid. The damage or defects caused by misuse or improper
use are not covered by the warranty.
• Avoid wearing the watch too tight in daily use. Keep the parts of skin touching the watch
dry.
• Keep your arm still while measuring data for accurate measurement.
Disclaimer: This product is an electronic monitoring product and is not intended as a medical
reference. We reserve the right to modify or improve any of the functions described in this
manual without any prior notice. At the same time, we hold the right to continuously update the
product content.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Old electrical appliances must not be disposed of together with the residual waste, but
have to be disposed of separately. The disposal at the communal collecting point via private
persons is for free. The owner of old appliances is responsible to bring the appliances to
these collecting points or to similar collection points. With this little personal effort you
contribute to recycle valuable raw materials and treatment of toxic substances.
FAQs
Can’t connect my watch to the app.
1. Keep the boAt Hub app updated to the latest version
2. Close all the programs on the watch Stop and restart Bluetooth and GPS Connect
again
3. Check and enable notification functions of your phone and keep the phone and watch in
close contact.
Note: Make sure your phone system meets Android 6.0 and above and iOS 12.1 and above.