Sr. No.: List of The Project

Sr.
List of the project

No.
1 To find the refractive indices of (a) water (b) oil (transparent) using a hollow prism.
2 To study various factors on which the internal resistance/emf of a dry cell depends
3 To study the variations, in current flowing, in a circuit containing a LDR, because of a variation. (a) in the
power of the incandescent lamp, used to ‘illuminate’ the LDR. (Keeping all the lamps at a fixed distance).
(b) in the distance of a incandescent lamp, (of fixed power), used to ‘illuminate’ the LDR.
4 To find the refractive indices of (a) water (b) oil (transparent) using a plane mirror, a equiconvex lens,
(made from a glass of known refractive index) and an adjustable object needle.
5 To study surface tension of water with different temperatures
6 To investigate the relation between the ratio of (i) output and input voltage and (ii) number of turns in
the secondary coil and primary coil of a self designed transformer.
7 To investigate the dependence, of the angle of deviation, on the angle of incidence, using a hollow prism
filled, one by one, with different transparent fluids.
8 To estimate the charge induced on each one of the two identical styro foam (or pith) balls suspended in a
vertical plane by making use of Coulomb’s law.
9 To compare the rate of evaporation of water, acetone and diethyl ether.
10 To study the factor, on which the self inductance, of a coil, depends, by observing the effect of this coil,
when put in series with a resistor/(bulb) in a circuit fed up by an a.c. source of adjustable frequency.
11 . Launch angles and projectile trajectory
12 . Optical fibres and its applications
13 To find the intensity of the magnetic field produced at the centre of a circular coil by the current passing
through it and to study the effect on the magnetic field by 1) strength of the current through the coil and
2) number of turns of the coil
14 Effect of change of size, mass, type of material on "g" using simple pendulum
15 . Refractive index of water, turpentine oil, ethyl alcohol, glycerine
16 A simple laser communicator.
17 SHM in simple spring mass system
18 To verify the laws of combination of resistances using the Ohm's law and the metre bridge and to
determine the more accurate method of measurement of resistances
19 To study the effect of temperature on surface tension of liquids.
20 SHM in simple spring mass system
21 To study the breaking stress of different materials of varying diameter
22 VISCOSITY OF VARIOUS LIQUIDS
23 How the strength of magnet varies as a function of temperature
24 Effect of detergent on surface tension of water
25 Rain alarm
26 Infra red remote control
27 Preparation, making, COMBINATION OF CAPACITORS
28 electromagnetic induction
29 Surface phenomena and collides
30 Dependance of emf of daniel cell on its conc and temperature of electrolytic solution
31 Thermoelectric effects of current
32 To study the heat produced and the factors making an influence on it due to resistance in it
33 Construction of a battery elliminator
34 Determine refractive index of prism using spectrometer

35 To determine of wavelength of the given monochromatic light source with the help of Newton's circular fringes.
36 Effect of wavelength, d, D on b -- Interference
37 Effect of wavelength, d, D on b -- Diffraction
38 To investigate the factors upon which the resistance of wire depends
39 Factors affecting mutual induction
40 EFFICIENCY OF BULBS
41 ELASTICITY OF DIFFERENT MATERIALS
42 Polarization of light through various liquids, materials
43 Efficiency of dry cells using Daniel cell and other cells using potentiometer
44 Calculate the distance traversed by a ball after falling through an inclined plane
45 Measuring a height of a building by using various techniques.
46 To build up a voltage regulated power supply capable f developing up to 30 V and 200 mA
47 COMPARISON OF EMF OF TWO CELLS
48 To study the factors affecting the coefficient of friction between 2 surfaces
49 To study the validity of ohm’s law for different types of material.
50 To determine the specific heat capacity of liquids
51 . To study the Inter conversion of potential and kinetic energy
52 To find the refractive indices of (a) water (b) oil (transparent) using a plane mirror, an equiconvex lens, (made from a glass of known
refractive index) and an adjustable object needle.
53 To measure the inductance of a given coil using impedance at different frequencies
54
To determine the velocity of wave in a stretched string with the help of sonometer.
55 To study the quality of detergents by capillary rise method

Sr. No.: List of The Project

Uploaded by

Copyright:

Available Formats

Sr. No.: List of The Project

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sr. No.: List of The Project

Uploaded by

Copyright:

Available Formats

Sr.

List of the project

5 To study surface tension of water with different temperatures

9 To compare the rate of evaporation of water, acetone and diethyl ether.

11 . Launch angles and projectile trajectory

12 . Optical fibres and its applications

16 A simple laser communicator.

17 SHM in simple spring mass system

19 To study the effect of temperature on surface tension of liquids.

20 SHM in simple spring mass system

21 To study the breaking stress of different materials of varying diameter

22 VISCOSITY OF VARIOUS LIQUIDS

23 How the strength of magnet varies as a function of temperature

24 Effect of detergent on surface tension of water

26 Infra red remote control

27 Preparation, making, COMBINATION OF CAPACITORS

29 Surface phenomena and collides

31 Thermoelectric effects of current

33 Construction of a battery elliminator

34 Determine refractive index of prism using spectrometer

36 Effect of wavelength, d, D on b -- Interference

37 Effect of wavelength, d, D on b -- Diffraction

38 To investigate the factors upon which the resistance of wire depends

39 Factors affecting mutual induction

41 ELASTICITY OF DIFFERENT MATERIALS

42 Polarization of light through various liquids, materials

45 Measuring a height of a building by using various techniques.

46 To build up a voltage regulated power supply capable f developing up to 30 V and 200 mA

47 COMPARISON OF EMF OF TWO CELLS

48 To study the factors affecting the coefficient of friction between 2 surfaces

49 To study the validity of ohm’s law for different types of material.

50 To determine the specific heat capacity of liquids

51 . To study the Inter conversion of potential and kinetic energy

55 To study the quality of detergents by capillary rise method

You might also like