MATERIAL LIST FOR ONE BEAM MK'D B-8453-B165

TOTAL QTY REQUIRED : 1 No(s)

P369
MARK DESCRIPTION QTY MATERIAL LENGTH WGT T. WT. (KG)
P098 UB254*146*37 1 ASTM A992 1860 68.8 68.8
P113 FLT10*70 1 ASTM A36/*** 234 1.3 1.3
P116 PL10*347 1 ASTM A36/*** 495 7.9 7.9
1773 87 P227 FLT10*120 2 ASTM A36/*** 150 1.4 2.8

173
P369 PL10*210 1 ASTM A36/*** 234 3.6 3.6
TOTAL WEIGHT FOR ONE ASSEMBLY 84.4
P098 BOLT LIST ONE ASSEMBLY B-8453-B165
SITE/SHOP BOLT DESCRIPTION QTY/ONE QTY/ALL GRADE FINISH
Site M 16 x 40 4 4 A325M/A563 Nuts Galvanized
P116 Site M 20 x 45 3 3 A325M/A563 Nuts Galvanized

120
120
Site M 24 x 55 3 3 A325M/A563 Nuts Galvanized

P113

P227 P227
-

40 206 1000 527 86

UB254*146*37 x 1860

73

P098 P113
P113 P098 P227
3 ø 22 2 ø 18
1) SURFACE PREPARATION FOR GALVANIZATION:
46
53

53
SANDBLASTING SA21/2.

2) GALVANIZATION: ASTM A123/A123M

60
75

75
P227 P227 2 ø 18 3) WELDING WHERE NOT INDICATED SHALL BE CONTINUOUS
3 ø 22 P369 P369
FILLET WELD. DIMENSION "S" OF NON-DIMENSIONED FILLET
75

75
T1
P227 WELDS SHALL AT LEAST BE EQUAL TO:
S = 0.80 * T for Fy <= 250 MPa

S = 1.00 * T for 250 < Fy <= 350 MPa T2

Where: S

1308 491 60 T = MIN (T1, T2) Fy = STEEL YIELD STRENGTH OF THE

P116 ELEMENTS TO BE CONNECTED.

4) THE MINIMUM FILLET WELD SIZE TO BE USED FOR

STRUCTURAL WELDS IS 5mm.
P116
5) A MINIMUM SEAL WELD LEG SIZE OF 3mm FILLET WELDS
SHALL BE USED.

6) ALL STRUCTURAL STEEL, INCLUDING PLATFORMS,

10

HANDRAILS , LADDERS, CAGES, STAIR TREADS, CHEQUERED

- PLATES & GRATINGS SHALL BE HOT DIP GALVANIZED ONLY,
3 ø 22 P116
- EXCEPT CRANES, LIFTING BEAMS, MONORAILS, DAVITS WHICH
10

147 ARE GALVANIZED AND PAINTED RAL 1004 SAFETY YELLOW.

4
FOR DETAILS REFER TO PROJECT SPECIFICATION 14.192.028”
A - A
P369
-
SD-UJV
147

42 75 75 42 P227
DOCUMENT STATUS SIGNED DATE
12 12

10
P113
1 - ACCEPTED AS SUBMITTED (submit certified as final)
3 ø 22
347

10
REVISE AND RESUBMIT
- 2 -
INCORPORATE COMMENTS, UP-REV AND RESUBMIT
35 115
P227 REJECTED - Document unacceptable, REVise and resubmit
200

- 3 -
140

140

150 (work can proceed where not impacted by this rejection)

100

210

4 - REVIEW NOT REQUIRED

P369
170

3 ø 26
234
SCF - SUPPLIER CERTIFIED AS FINAL
70

70

120
60
ISSUE OF CERTIFIED FINAL DOCUMENT DOES NOT RELIUPES SUPPLIER OF
234 RESPONSIBILITY OR LIABILITY UNDER THE CONTRACT/PURCHASE ORDER

70
12 12
30

15
P116 15 P113 CWP No:A10-WP5.4-020-FI-MC-101
-
2 ø 18
495 -
- -
295 75 75 50 -
-
-
OB RE-ISSUED FOR REVIEW UP 30/06/23 ET 30/06/23 EA 30/06/23
40 1820 OA RE-ISSUED FOR REVIEW UP 01/03/23 ET 01/03/23 EA 01/03/23
1860 O ISSUED FOR REVIEW UP 02/02/23 ET 02/02/23 EA 02/02/23
REV DESCRIPTION DWN DATE CHKD DATE APPD DATE
- REVISIONS
53

This Document is confidential. The copyright therein is vested in Nigeria LNG Ltd, Nigeria.
Recipient must obtain the written authority of the said company before wholly or partially duplicating.
P098
All rights reserved.
75

PO No: 1423030
3 ø 22
VENDOR DRAWING. No. NIGERIA LIQUEFIED NATURAL GAS
TGIL-AD-19589-310 NLNG - BONNY
75

DRAWN: UP PROJECT
DATE: 30/06/23 NLNG TRAIN 7
CHECKED: ET
VENDOR NAME
DATE: 30/06/23
- THOMPSON & GRACE INVESTMENTS LTD.
APPROVED: EA
LOCATION DISCIPLINE UNIT No
DATE: 30/06/23
BONNY ISLAND, NIGERIA CIV 2000
APPD. LNG:
TITLE

1 No.BEAM REQUIRED AS DRAWN MARKED B-8453-B165 DATE: PO 1423030 Thompson & Grace: ASSEMBLY DRAWING
{QRCODE} CONTRACTOR DRAWING. No.
L020-CD-B-19589 FOR STEEL STRUCTURE FOR B-8453
Tekla structures

SCALE COMPANY PROJECT No. COMPANY DRAWING No. SHEET REV

B190170NTP
CAD REF: T-14.419.589-SHT163.dwg ORIGINAL SIZE: A1 CLASSIFICATION: MOST CONFIDENTIAL CONFIDENTIAL RESTRICTED UNRESTRICTED 1:5 CONTRACTOR PROJECT No.
N88480 T-14.419.589 163 OF 468 OB