Final-B.-Tech-R20-REGULATIONS 30-09-2021

Download as pdf or txt
Download as pdf or txt
You are on page 1of 22

ACADEMIC REGULATIONS (R20)

COURSE STRUCTURE & DETAILED SYLLABUS

For

B. Tech FOUR YEAR DEGREE COURSE

(Applicable for the batches admitted from 2020-21)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA


KAKINADA – 533003, ANDHRA PRADESH, INDIA
ACADEMIC REGULATIONS (R20) FOR B. TECH. (REGULAR)
Applicable for students of B. Tech. (Regular) from Academic Year 2020-21 onwards

Jawaharlal Nehru Technological University Kakinada (JNTUK) 2020 Regulations (R20 Regulations)
applicable to all affiliated colleges are given hereunder. These regulations govern the B. Tech
programmes offered by all affiliated colleges with effect from the students admitted to the programmes
in academic year 2020-21.

1. Courses of study:

The following courses of study are offered at present as specializations for the B. Tech. Courses in the
jurisdiction of all affiliated colleges of JNTUK.

Branch
S. No Branch Name
Code
1 Civil Engineering 01
2 Electrical & Electronics Engineering 02
3 Mechanical Engineering 03
4 Electronics and Communication Engineering 04
5 Computer Science Engineering 05
6 Computer Science & Technology 06
7 Computer Science & Information Technology 07
8 Chemical Engineering 08
9 Electronics and Instrumentation Engineering 10
10 Bio- Medical Engineering 11
11 Information Technology 12
12 Electronics and Control Engineering 13
13 Electronics & Communication Technology 14
14 Computer Science and Systems Engineering 15
15 Electronics and Computer Engineering 19
16 Aeronautical Engineering 21
17 Instrumentation and Control Engineering 22
18 Bio- Technology 23
19 Automobile Engineering 24
20 Mining Engineering 26
21 Petroleum Technology / Petroleum Engineering 27
22 Petrochemical Engineering 28
23 Aviation Engineering 29
24 Aircraft Maintenance Engineering 30
25 Metallurgical Engineering 31
26 Power Engineering 34
27 Agriculture Engineering 35
28 Textile Engineering 36
29 Architecture (B.Arch) 40
30 B. Pharmacy 00
31 CSE (Artificial Intelligence and Machine Learning) 42
32 CSE( Artificial Intelligence) 43
33 CSE( Data Science) 44
34 CSE (Artificial Intelligence and Data Science) 45
35 CSE ( Cyber Security) 46
36 CSE ( Internet of things and Cyber security including Block chain Technology) 47
37 CSE (Computer Science and Business System) 48
38 CSE( Internet of Things) 49
39 ECE ( Electronics & Communication Technology) 50
40 Food Engineering 51
41 ECE ( Internet of Things) 52
42 ME ( Robotics) 53
43 Artificial Intelligence and Data Science 54
44 Pharmaceutical Engineering 55
45 Aerospace Engineering 56
46 Computer Science and Business System 57
47 CSE (Big Data Analytics) 58
48 Cyber Security 59
49 Internet of Thing 60
50 Artificial Intelligence and Machine Learning 61
51 Computer Science and Design 62
2. Medium of Instruction: The medium of instruction of the entire B. Tech undergraduate programme
in Engineering & Technology (including examinations and project reports) will be in English only.
3. Admissions: Admission to the B. Tech Programme shall be made subject to the eligibility,
qualifications and specialization prescribed by the A.P. State Government/University from time to
time. Admissions shall be made either on the basis of the merit rank obtained by the student in the
common entrance examination conducted by the A.P. Government/University or on the basis of any
other order of merit approved by the A.P. Government/University, subject to reservations as
prescribed by the Government/University from time to time.
4. Programme Pattern:
a) Total duration of the of B. Tech (Regular) Programme is four academic years
b) Each Academic year of study is divided in to two semesters.
c) Minimum number of instruction days in each semester is 90.
d) Grade points, based on percentage of marks awarded for each course will form the basis for
calculation of SGPA (Semester Grade Point Average) and CGPA (Cumulative Grade Point
Average).
e) The total credits for the Programme are 160.
f) A three-week induction program is mandatory for all first year UG students and shall be
conductedas per AICTE/UGC/APSCHE guidelines.
g) Student is introduced to “Choice Based Credit System (CBCS)”.
h) A pool of interdisciplinary and job-oriented mandatory skill courses which are relevant to the
industry are integrated into the curriculum of concerned branch of engineering (total five skill
courses: two basic level skill courses, one on soft skills and other two on advanced level skill
courses)
i) A student has to register for all courses in a semester.
j) All the registered credits will be considered for the calculation of final CGPA.
k) Each semester has - ‘Continuous Internal Evaluation (CIE)’ and ‘Semester End Examination
(SEE)’. Choice Based Credit System (CBCS) and Credit Based Semester System (CBSS) as
indicated by UGCand course structure as suggested by AICTE are followed.
l) A 10 months industry/field mandatory internship, both industry and social, during the summer
vacation and also in the final semester to acquire the skills required for job and make engineering
graduates to connect with the needs of the industry and society at large.
m) All students shall be mandatorily registered for NCC/NSS activities.
n) Each college shall assign a faculty advisor/mentor after admission to each student or group of
students from same department to provide guidance in courses registration/career
growth/placements/opportunities for higher studies/GATE/other competitive exams etc.
5. Subject/Course Classification: All subjects/courses offered for the undergraduate programme in E & T
(B. Tech degree programmes) are broadly classified as follows.
APSCHE breakup AICTE Credits
S. No Category Code
of Credits of breakup
Humanities and social science including
1 HSMC 10.5 12
Management courses
2 Basic Science courses BSC 21 25
3 Engineering courses science ESC 24 24
4 Professional core Courses PCC 51 48
5 Open Elective Courses OEC 12 18
6 Professional Courses Elective PEC 15 18
7 Internship, seminar, project work PROJ 16.5 15
8 Skill Oriented Courses SC 10 -
9 Laboratory Courses LC - -
10 Mandatory courses MC Non-credit Non-credit
Total Credits 160 160

6. Registration for Courses:


i) The college shall invite registration forms from the students at the beginning of the semester for
the registration for courses each semester. The registration process shall be closed within one
week. If any student wishes to withdraw the registration, he/she shall submit a letter to the
principal through the class teacher/instructor and HOD. The principal shall communicate the
registration and withdraw details courses of each student in a consolidated form to the college
examination section andUniversitywithout fail.
ii) There are four open electives in each branch. All Open Electives are offered to students of all
branches in general. A student shall choose an open elective, by consulting the HOD/advisor, from
thelist in such a manner that he/she has not studied the same course in any form during the
Programme.
iii) A student shall be permitted to pursue up to a maximum of two elective courses under MOOCs
during the programme. Students are advised to register for only for minimum 12 weeks in
duration MOOCs courses. Student has to pursue and acquire a certificate for a MOOC course
only from the SWAY/NPTE through online with the approval of Head of the Department in
order to earn the 3 credits. The Head of the department shall notify the list of such courses at the
beginning of the semester. The details of the MOOCs courses registered by the students shall be
submitted to the University examination center as well as college examination center. The Head
of the Department shall appoint a mentor for each of the MOOC subjects registered by the
students to monitor the student’s assignment submissions given by SWAYAM/NPTEL. The
student needs to submit all the assignments given and needs to take final exam at the proctor
center. The student needs to earn a certificate by passing the exam. The student will be awarded
the credits given in curriculum only by submission of the certificate. In case if student does not
pass subjects registered through SWAYAM/NPTEL, the same or alternative equivalent subject
may be registered again through SWAYAM/NPTEL in the next semester with the
recommendation of HOD and shall be passed.
iv) Two summer internships each with a minimum of six weeks duration shall be mandatorily
done/completed respectively at the end of second and third years (during summer vacations). The
internship can be done by the students at local industries, Govt. Organizations, construction
agencies, Industries, Hydel and thermal power projects and also in software MNCs. After
completing the summer internship, the students shall register in the immediate respective
oddsemester and it will be evaluated at the end of the semester as per norms of the university.
The student has to produce the summer internship satisfactory report and certificate taken from
the organization to be considered for evaluation. The College shall facilitate and monitor the
student internship programs. Completion of internships is mandatory, if any student fails to
complete internship, he/she will not be eligible for the award of degree. In such cases, the student
shall repeat andcomplete the internship.
v) In the final semester, the student should mandatorily register and undergo internship and in
parallel he/she should work on a project with well-defined objectives. At the end of the semester
thecandidate shall submit an internship completion certificate and a project report. A student shall
also be permitted to submit project report on the work carried out during the internship. The
project report shall be evaluated with an external examiner.
vi) Curricular Framework for Skill oriented courses
a) There are five (05) skill-oriented courses shall be offered during III to VII semesters and
studentsmust register and pass the courses successfully.
b) For skill oriented/skill advanced course, one theory and 2 practical hours (1-0-2) or two
theory hours (2-0-0) may be allotted as per the decision of concerned BOS.
c) Out of the five skill courses; (i) two shall be skill-oriented courses from the same domain and
shall be completed in second year (ii) Of the remaining 3 skill courses, one shall be
necessarily be a soft skill course and the remaining 2 shall be skill-advanced courses either
from the same domainor job-oriented skill courses, which can be of inter disciplinary nature.
d) Students may register the interdisciplinary job-oriented skill courses based on the
prerequisites and eligibility in consultation with HOD of the college.
e) The student shall be given an option to choose either the skill courses being offered by the
college or to choose a certificate course being offered by industries/Professional
bodies/APSSDC or any other accredited bodies. However, the department has to assign
mentors in the college to monitor the performance of the students.
f) If a student chooses to take a Certificate Course offered by industries/Professional
bodies/APSSDC or any other accredited bodies, in lieu of the skill advanced course offered by
the Department, then the department shall mark overall attendance of the student for the
remaining courses in that semester excluding the skill course in all the calculations of
mandatoryattendance requirements upon producing a valid certificate. However, the student
is deemed to have fulfilled the attendance requirement of the course, if the external agency
issues a certificate with satisfactory condition. If the certificate issued by external agency is
marked with unsatisfactory condition, then the student shall repeat the course either in the
college or at external agency. The credits will be awarded to the student upon producing the
successful Course Completion Certificate from the agency/professional bodies and after
passing in the viva-voce examination conducted at college as per university norms at the end
of the semester.

7. (a) Award of B. Tech. Degree: A student will be declared eligible for the award of B. Tech. Degree
if he fulfills the following academic regulations:
i) A student shall be declared eligible for award of the B. Tech Degree, if he pursues a
course ofstudy in not less than four and not more than eight academic years.
ii) After eight academic years from the year of their admission, he/she shall forfeit their seat
in B.Tech course and their admission stands cancelled.
iii) The student shall register for 160 credits and must secure all the 160 credits.
iv) All students shall register for NCC/NSS activities and will be required to participate in an
activity specified by NSS officer during second and third semesters. Grade shall be awarded
as Satisfactory or Unsatisfactory in the mark sheet on the basis of participation, attendance,
performance and behavior. If a student gets an unsatisfactory Grade, he/she shall repeat the
aboveactivity in the subsequent years, in order to complete the degree requirements.
v) Courses like Environmental Sciences, Universal Human Values, Ethics, Indian Constitution,
Essence of Indian Traditional Knowledge etc., shall be included in the curriculum as non-
credit mandatory courses. Environmental Sciences is to be offered compulsorily as
mandatory course for all branches. A student has to secure 40% of the marks allotted in the
internal evaluation for passing the course. No marks or letter grade shall be allotted for all
mandatory non-credit courses.
vi) Credit Definition:
1 Hour Lecture (L) per week 1 Credit
1 Hour Tutorial (T) per week 1 Credit
1 Hour Practical (P) per week 0.5 Credit
2 Hours Practical (Lab) per week 1 Credit
(b) Award of B. Tech. (Honor)/B. Tech. (Minor): B. Tech. with Honors or a B. Tech. with a Minor
will be awarded if the student earns 20 additional credits are acquired as per the
regulations/guidelines. The regulations/guidelines are separately provided. Registering for
Honors/Minor is optional.

8. Attendance Requirements
a. A student is eligible to write the University examinations if he acquires a minimum of 40%
in each subject and 75% of attendance in aggregate of all the subjects.
b. Condonation of shortage of attendance in aggregate up to 10% (65% and above and below
75%) may be granted by the College Academic Committee. However, this condonation
concession is applicableonly to any two semesters during the entire programme.
c. Shortage of Attendance below 65% in aggregate shall not be condoned.
d. A student who is short of attendance in a semester may seek re-admission into that semester
when offered within 4 weeks from the date of commencement of class work.
e. Students whose shortage of attendance is not condoned in any semester are not eligible to
write their end semester examination of that class.
f. A stipulated fee of Rs. 500/- in the concerned semester shall be payable towards
condonation of shortage of attendance. Students availing condonation on medical ground
shall produce a medical certificate issued by the competitive authority.
g. A student will be promoted to the next semester if he satisfies the (i) attendance requirement
of the present semester and (ii) minimum required credits.
h. If any candidate fulfills the attendance requirement in the present semester, he shall not be
eligible for readmission into the same class.
i. For induction programme attendance shall be maintained as per AICTE norms.
j. For non-credit mandatory courses the students shall maintain the attendance similar to credit courses

9. Evaluation-Distribution and Weightage of marks


(i) Paper setting and evaluation of the answer scripts shall be done as per the procedures laid down by
theUniversity Examination section from time to time.
(ii) For non-credit mandatory courses, like Environmental Sciences, Universal Human Values,
Ethics, Indian Constitution, Essence of Indian Traditional Knowledge, the student has to secure
40% of the marks allotted in the internal evaluation for passing the course. No marks or letter
grade shall be allotted for all mandatory non-credit courses.
(iii) A student is deemed to have satisfied the minimum academic requirements if he has earned the
credits allotted to each theory/practical design/drawing subject/ project etc by securing not less
than 35% of marks in the end semester exam and minimum 40% of marks in the sum total of the
internal marks andend semester examination marks together.
(iv) Distribution and Weightage of marks:
The assessment of the student’s performance in each course will be based on Continuous Internal
Evaluation (CIE) and Semester-End Examination (SEE). The performance of a student in each
semester shall be evaluated subject–wise with a maximum of 100 marks for theory subject and
50 marks for practical subject. For theory subjects the distribution shall be 30 marks for Internal
Evaluation and 70 marks for the End Examinations.
S. No Components Internal External Total
1 Theory 30 70 100
2 Engineering Graphics/Design/Drawing 30 70 100
3 Practical 15 35 50
4 Mini Project/Internship/Industrial Training/ Skill - 50 50
Development programmes/Research Project
5 Project Work 60 140 200

(v) Continuous Internal Theory Evaluation:


(a) For theory subjects, during a semester, there shall be two mid-term examinations. Each mid-
term examination consists of (i) one online objective examination (ii) one descriptive
examination and
(iii) one assignment. The online examination (objective) shall be 10 marks and descriptive
examination shall be for 15 marks with a total duration of 1 hour 50 minutes (20 minutes for
objective and 90 minutes for descriptive paper).
(b) The first online examination (objective) is set with 20 multiple choice questions for 10
marks (20 questions x ½ marks) from first two and half units (50% of the syllabus) and it is
conducted by University Examination Section. The descriptive examination is set with 3
full questions for 5 marks each from first two and half units (50% of the syllabus), the student
has to answer all questions. In the similar lines, the second online and descriptive
examinations shall be conductedon the rest of the syllabus.
(c) The assignment is given by the concerned class teacher for five marks from first two and half
units (50% of the syllabus). The second assignment shall be given from rest of the syllabus.
The first assignment should be submitted before the conduct of the first mid-term
examination, and the second assignment should be submitted before the conduct of the
second mid-term examination.
(d) The total marks secured by the student in each mid-term examination are evaluated for 30
marks. The first mid marks (Mid-1) consisting of marks of online objective examination,
descriptive examination and assignment shall be submitted to the University examination
section within one week after completion of first mid examination.
(e) The mid marks submitted to the University examination section shall be displayed in the
concerned college notice boards for the benefit of the students.
(f) If any discrepancy found in the submitted Mid-1 marks, it shall be brought to the notice of
university examination section within one week from the submission.
(g) Second mid marks (Mid-2) consisting of marks of online objective examination, descriptive
examination and assignment shall also be submitted to University examination section within
one week after completion of second mid examination and it shall be displayed in the notice
boards. Ifany discrepancy found in the submitted mid-2 marks, it shall be brought to the notice
of universityexamination section within one week from the submission.
(h) Internal marks can be calculated with 80% weightage for better of the two mids and 20%
Weightage for another mid exam.
Example:
Mid-1 marks = Marks secured in (online examination-1+descriptive examination-1
+one assignment-1)
Mid-2 marks = Marks secured in (online examination-2+descriptive examination-2
+one assignment-2)
Final internal Marks = (Best of (Mid-1/Mid-2) marks x 0.8
+ Least of (Mid-1/Mid-2) marks x 0.2)
(i) With the above criteria, university examination section will send mid marks of all subjects in
consolidated form to all the concerned colleges and same shall be displayed in the concerned
college notice boards. If any discrepancy found, it shall be brought to the notice of university
examination section through proper channel within one week with all proofs. Discrepancies
brought after the given deadline will not be entertained under any circumstances.
(vi) Semester End Theory Examinations Evaluation:
(a) The semester end examinations will be conducted university examination section for 70
marks consists of five questions carrying 14 marks each. Each of these questions is from one
unit and may contain sub-questions. For each question there will be an “either” “or” choice,
which means that there will be two questions from each unit and the student should answer
either of the two questions.
(b) For practical subjects there shall be continuous evaluation during the semester for 15 internal
marks and 35 end examination marks. The internal 15 marks shall be awarded as follows:
day to day work - 5 marks, Record-5 marks and the remaining 5 marks to be awarded by
conducting an internal laboratory test. The end examination shall be conducted by the teacher
concerned and external examiner appointed by controller of examinations, JNTUK.
Note: Laboratory marks and the internal marks awarded by the College are not final. The
marks are subject to scrutiny and scaling by the University wherever felt desirable. The
internal and laboratory marks awarded by the College will be referred to a Committee. The
Committee shall arrive at a scaling factor and the marks will be scaled as per the scaling
factor. The recommendations of the Committee are final and binding. All the laboratory
records and internal test papers shall be preserved in respective departments as per University
norms and shall be produced to the Committees of University as and when they ask for.
(c) For the subject having design and / or drawing (such as Engineering Graphics, Engineering
Drawing, Machine Drawing) and estimation, the distribution shall be 30 marks for internal
evaluation (15 marks for continuous Assessment (day–to–day work) and 15 marks for
internal tests) and 70 marks for end examination. There shall be two internal tests in a
Semester for 15 marks each and final marks can be calculated with 80% weightage for better
of the two tests and 20% weightage for other test and these are to be added to the marks
obtained in day-to-day work.
(d) Evaluation of the summer internships: It shall be completed in collaboration with local
industries, Govt. Organizations, construction agencies, Industries, Hydel and thermal power
projects and also in software MNCs in the area of concerned specialization of the UG
programme. Students shall pursue this internship during summer vacation just before its
offeringas per course structure. The minimum duration of this course shall be at least 6
weeks. The student shall register for the internship as per course structure after
commencement of academic year. A supervisor/mentor/advisor has to be allotted to guide
the students for taking up the summer internship. The supervisor shall monitor the attendance
of the students while taking up the internship. Attendance requirements are as per the norms
of the University. After successful completion, students shall submit a summer internship
technical report to the concerned department and appear for an oral presentation before the
departmental committee consists of an external examiner appointed by the University; Head
of the Department, supervisor of the internship and a senior faculty member of the
department. A certificate from industry/skill development center shall be included in the
report. The report and the oral presentation shall carry40% and 60% weightages respectively.
It shall be evaluated for 50 external marks at the end of the semester. There shall be no
internal marks for Summer Internship. A student shall secure minimum 40% of marks for
successful completion. In case, if a student fails, he/she shall reappear as and when semester
supplementary examinations are conducted by the University.
(e) The job-oriented skill courses may be registered at the college or at any accredited external
agency. A student shall submit a record/report on the on the list skills learned. If the student
completes job- oriented skill course at external agency, a certificate from the agency shall be
included in the report. The course will be evaluated at the end of the semester for 50 marks
(record: 15 marks and viva-voce: 35 marks) along with laboratory end examinations in the
presence of external (appointed by the university) and internal examiner (course instructor or
mentor). There are no internal marks for the job-oriented skill courses.
(f) Mandatory Course (M.C): Environmental Sciences, Universal Human Values, Ethics, Indian
Constitution, Essence of Indian Traditional Knowledge etc non-credit (zero credits)
mandatory courses. Environmental Sciences shall be offered compulsorily as mandatory
course for all branches. A minimum of 75% attendance is mandatory in these subjects. There
shall be an external examination for 70 marks and it shall be conducted by the college
internally. Two internal examinations shall be conducted for 30 marks and a student has to
secure at least 40% ofthe marks for passing the course. There is no online internal exam for
mandatory courses. No marks or letter gradeshall be printed in the transcripts for all mandatory
non-credit courses, but only Completed (Y)/Not-completed (N) will be specified.
(g) Procedure for Conduct and Evaluation of MOOC: There shall be a Discipline
CentricElective Course through Massive Open Online Course (MOOC) as Program Elective
course. The student shall register for the course (Minimum of 12 weeks) offered by
SWAYAM/NPTEL through online with the approval of Head of the Department. The Head
of the Department shall appoint one mentor for each of the MOOC subjects offered. The
student needs to register the course in the SWAYAM/NPTEL portal. During the course, the
mentor monitors the student’s assignment submissions given by SWAYAM/NPTEL. The
student needs to submit all the assignments given and needs to take final exam at the proctor
center. The student needs to earn acertificate by passing the exam. The student will be
awarded the credits given in curriculum onlyby submission of the certificate. In case if
student does not pass subjects registered through SWAYAM/NPTEL, the same or alternative
equivalent subject may be registered again through SWAYAM/NPTEL in the next semester
with the recommendation of HOD and shall be passed.
(h) Major Project (Project - Project work, seminar and internship in industry):
In the final semester, the student should mandatorily register and undergo internship and in
parallel he/she should work on a project with well-defined objectives. At the end of the
semester the candidate shall submit an internship completion certificate and a project report.
A student shall also be permitted to submit project report on the work carried out during the
internship. The projectreport shall be evaluated with an external examiner.
Evaluation: The total marks for project work 200 marks and distribution shall be 60 marks
for internal and 140 marks for external evaluation. The supervisor assesses the student for 30
marks (Report: 15 marks, Seminar: 15 marks). At the end of the semester, all projects shall be
showcasedat the department for the benefit of all students and staff and the same is to
be evaluated by the departmental Project Review Committee consisting of supervisor, a senior
facultyand HOD for 30 marks. The external evaluation of Project Work is a Viva-Voce
Examination conducted in the presence of internal examiner and external examiner appointed
by the University and is evaluated for 140 marks.
10. Integrated theory lab:
a. The integrated course is in the ratio of 2:1 (total credit: 3).
b. Attendance shall be counted for both in theory as well as lab (75:25 ratio). Minimum
attendanceshall be required individually in theory and lab as per university norms
c. Student has to attend the internal examination and external examination conducted by the
collegeand University as per the regulations.
d. Student has to pass individually both the external examinations (Theory for 100 marks and
Labfor 50 marks) conducted by the University as per the regulations.
e. If the student fails in either theory or laboratory, the final result is FAIL only.
f. The student has to pass separately both in the external theory examination and external
labexamination as per the University regulations.

11. Recounting of Marks in the End Semester Examination: A student can request for recounting of
his/her answer book on payment of a prescribed fee as per university norms.
12. Re-evaluation or Revaluation by Challenge of the End Semester Examination: A student can request
for Revaluation or Revaluation by Challenge of his/her answer book on payment of a prescribed fee
as per university norms.
13. Supplementary Examinations: A student who has failed to secure the required credits can appear for
a supplementary examination, as per the schedule announced by the University.
14. Malpractices in Examinations: Disciplinary action shall be taken in case of malpractices during
Mid/Endexaminations as per the rules framed by the University.
15. Promotion Rules
The following academic requirements have to be satisfied in addition to the attendance requirements
mentioned in item no.8 for promotion to higher classes
a. A student shall be promoted from first year to second year if he fulfills the minimum
attendance requirement as per University norm.
b. A student will be promoted from II to III year if he fulfills the academic requirement of 40%
of credits up to either II year I-Semester or II year II-Semester from all the examinations,
whether ornot the candidate takes the examinations and secures prescribed minimum
attendance in II year II semester.
c. A student shall be promoted from III year to IV year if he fulfills the academic requirements
of 40% of the credits up to either III year I semester or III year II semester from all the
examinations, whether or not the candidate takes the examinations and secures prescribed
minimum attendance in III year II semester.
16. Course Pattern
a. The entire course of study is for four academic years; all years are on semester pattern.
b. A student eligible to appear for the end semester examination in a subject, but absent from
it or has failed in the end semester examination, may write the exam in that subject when
conducted next.
c. When a student is detained for lack of credits/shortage of attendance, he may be re-admitted
into the same semester/year in which he has been detained. However, the academic
regulations under which he was first admitted shall continue to be applicable to him.
17. Earning of Credit:
A student shall be considered to have completed a course successfully and earned the credits if
he/she secures an acceptable letter grade in the range A+ to E as given below. Letter grade ‘F’ in any
course implies failure of the student in that course and no credits earned. Absent is also treated as no
credits earned. For project same % percentages will be followed for grading.
Marks Range Theory Marks Range Lab Letter
Level GradePoint
(Max – 100) (Max – 50) Grade
≥ 90 ≥ 45 Outstanding A+ 10
≥80 to <90 ≥40 to <45 Excellent A 9
≥70 to <80 ≥35 to <40 Very Good B 8
≥60 to <70 ≥30 to <35 Good C 7
≥50 to <60 ≥25 to <30 Fair D 6
≥40 to <50 ≥20 to <25 Satisfactory E 5
<40 <20 Fail F 0
- Absent AB 0
18. Computation of SGPA and CGPA
The UGC recommends the following procedure to compute the Semester Grade Point
Average(SGPA) and Cumulative Grade Point Average (CGPA):
(i) SGPA(Sk) of kth semester (1 to 8) is ratio of sum of the product of the number of
credits with the grade points scored by a student in all the courses taken by a student
and the sum of the total number of credits of all the courses undergone/registered by a
student, i.e
n

 C  G  i i
SGPA(Sk )  i1
n

C i
i1

Where Ci is the number of credits of the ith course/subject in a semester and Gi is the grade
point scored by the student in the ith course/subject and n is the number of courses/subjects
registered in that semester.
(ii) CGPA: The CGPA is calculated in the same manner taking into account all the „m’
courses/subjects registered by student over all the semesters of a Programme
i.e., inall eight semesters
m

 C  S 
i i
CGPA  i1 m
C i
i1

Where Si is SGPA of the ith semester and Ci is total number of credits in that semester.
(iii) SGPA and CGPA shall be rounded off to 2 decimal points and reported in transcripts.
(iv) As per AICTE regulations, conversion of CGPA into equivalent percentage as follows:
Equivalent Percentage = (CGPA – 0.75) x 10
(v) Illustration of Computation of SGPA and CGPA
Illustration for SGPA: Let us assume there are 6 subjects in a semester. The grades obtained
asfollows:
Grade Si= Credit Point(Credit x
Course Credit Gradepoint
Obtained Grade)
Subject 1 3 B 8 3 X 8 = 24
Subject 2 4 C 7 4 X 7 = 28
Subject 3 3 D 6 3 X 6 = 18
Subject 4 3 A+ 10 3 X 10 = 30
Subject 5 3 E 5 3 X 5 = 15
Subject 6 4 D 6 4 X 6 = 24
20 139

Thus, SGPA =139/20 =6.95=6.9 (approx.)


Illustration for CGPA:

Semester 1 Semester 2 Semester 3 Semester 4


Credits: 20 Credits: 22 Credits: 25 Credits: 26
SGPA: 6.9 SGPA: 7.8 SGPA: 5.6 SGPA: 6.0

Semester 5 Semester 6 Semester 7 Semester 8


Credits: 26 Credits: 25 Credits: 21 Credits: 23
SGPA: 6.3 SGPA: 8.0 SGPA: 6.4 SGPA: 7.5
Thus,
CGPA  20  6.9 + 22  7.8 + 25  5.6 + 26  6.0 + 26  6.3 + 25  8.0  21 6.4  23  7.5  1276 .3  6.78
188 188
19. Award of Class
After a student has satisfied the requirements prescribed for the completion of the program and is
eligiblefor the award of B. Tech. Degree, he shall be placed in one of the following four classes:
Class Awarded CGPA to be secured Remarks
≥ 7.75
First Class with Distinction From the
(Without any supplementary appearance)
CGPA
First Class ≥ 6.75 secured
Second Class ≥ 5.75 to < 6.75 from
Pass Class ≥ 5.00 to < 5.75 160 Credits

20. Minimum Instruction Days


The minimum instruction days for each semester shall be 90 working days. There shall be no branch
transfers after the completion of the admission process. There shall be no transfer from one
college/stream to another within the Constituent Colleges and Units of Jawaharlal Nehru
Technological University Kakinada.

21. Withholding of Results


If the student is involved in indiscipline/malpractices/court cases, the result of the student will be withheld.

22. Transitory Regulations


(a) Discontinued or detained candidates are eligible for re-admission as and when next offered.
(b) The re-admitted candidate will be governed by the rules & regulations under which the candidate
hasbeen admitted.
(c) (i) In case of transferred students from other Universities, credits shall be transferred to JNTUK as
per the academic regulations and course structure of JNTUK.
(ii) The students seeking transfer to colleges affiliated to JNTUK from various other Universities
/ Institutions have to obtain the credits of any equivalent subjects as prescribed by JNTUK.
In addition, the transferred candidates have to pass the failed subjects at the earlier Institute
with already obtained internal/sessional marks to be conducted by JNTUK.

23. Gap - Year


Gap Year concept of Student Entrepreneur in Residence shall be introduced and outstanding students
who wish to pursue entrepreneurship are allowed to take a break of one year at any time after I/II/III
yearto pursue entrepreneurship full time. This period shall be counted for the maximum time for
graduation. An evaluation committee at university level shall be constituted to evaluate the proposal
submitted by the student and the committee shall decide on permitting the student for availing the
Gap Year.

24. General
(a) Wherever the words “he”, “him”, “his”, occur in the regulations, they include “she”, “her”, “hers”.
(b) The academic regulation should be read as a whole for the purpose of any interpretation.
(c) In case of any doubt or ambiguity in the interpretation of the above rules, the decision of the
Vice-Chancellor is final.
(d) The University may change or amend the academic regulations or syllabi at any time and the
changes or amendments made shall be applicable to all the students with effect from the dates
notified by the University.
***
ACADEMIC REGULATIONS (R20) FOR B. TECH (LATERAL ENTRY SCHEME)
Applicable for students admitted into II B. Tech. from the Academic Year 2020-21 onwards
1 Award of B. Tech. Degree
A student will be declared eligible for the award of B. Tech. Degree if he fulfills
the following academic regulations:
a) A student shall be declared eligible for the award of the B. Tech Degree, if he
pursues a course of study in not less than three academic years and not more than
six academic years. After six academic years from the year of their admission,
he/she shall forfeit their seat in B. Tech course and their admission stands
cancelled.
b) The candidate shall register for 121 credits and secure all the 121 credits.

2. The attendance regulations of B. Tech. (Regular) shall be applicable to


B.Tech(lateral entry).

3. Promotion Rule
A student shall be promoted from second year to third year if he fulfills the
minimumattendance requirement.
A student shall be promoted from III year to IV year if he fulfills the academic
requirements of 40% of the credits up to either III year I semester or III year II
semester from all the examinations, whether or not the candidate takes the
examinations and secures prescribed minimum attendance in III year II semester.

4. Award of Class
After a student has satisfied the requirement prescribed for the completion of the
program and is eligible for the award of B. Tech. Degree, he shall be placed in
one of the following four classes:

Class Awarded CGPA to be secured Remarks


≥ 7.75 From the
First Class with Distinction CGPA
(Without any supplementary appearance)
First Class ≥ 6.75 secured from
121 Credits
Second Class ≥ 5.75 to < 6.75 from II Year to
Pass Class ≥ 5.00 to < 5.75 IV Year

The Grades secured, Grade points and Credits obtained will be shown
separatelyin the memorandum of marks.

5. All the other regulations as applicable to B. Tech. 4-year degree course


(Regular) will hold good for B. Tech. (Lateral Entry Scheme).
COMMUNITY SERVICE PROJECT

Introduction
1. Community Service Project is an experiential learning strategy that integrates meaningful
community service with instruction, participation, learning and community development
2. Community Service Project involves students in community development and service
activities and applies the experience to personal and academic development.
3. Community Service Project is meant to link the community with the college for mutual
benefit. The community will be benefited with the focused contribution of the
collegestudents for the village/ local development. The college finds an opportunity to
develop social sensibility and responsibility among students and also emerge as a socially
responsibleinstitution.
Objective
Community Service Project should be an integral part of the curriculum, as an alternative to
the 2 months of Summer Internships / Apprenticeships / On the Job Training, whenever
thereis an exigency when students cannot pursue their summer internships. The specific
objectives are;
1. To sensitize the students to the living conditions of the people who are around them,
2. To help students to realize the stark realities of the society.
3. To bring about an attitudinal change in the students and help them to develop societal
consciousness, sensibility, responsibility and accountability
4. To make students aware of their inner strength and help them to find new /out of box
solutionsto the social problems.
5. To make students socially responsible citizens who are sensitive to the needs of the
disadvantaged sections.
6. To help students to initiate developmental activities in the community in coordination
with public and government authorities.
7. To develop a holistic life perspective among the students by making them study culture,
traditions, habits, lifestyles, resource utilization, wastages and its management, social
problems, public administration system and the roles and responsibilities of different
persons across different social systems.
Implementation of Community Service Project
1. Every student should put in a minimum of 180 hours for the Community Service
Project during the summer vacation.
2. Each class/section should be assigned with a mentor.
3. Specific Departments could concentrate on their major areas of concern. For example,
Dept.of Computer Science can take up activities related to Computer Literacy to different
sectionsof people like - youth, women, house-wives, etc
4. A log book has to be maintained by each of the student, where the activities
undertaken/involved to be recorded.
5. The log book has to be countersigned by the concerned mentor/faculty in charge.
6. Evaluation to be done based on the active participation of the student and grade could
be awarded by the mentor/faculty member.
7. The final evaluation to be reflected in the grade memo of the student.
8. The Community Service Project should be different from the regular
programmes ofNSS/NCC/Green Corps/Red Ribbon Club, etc.
9. Minor project report should be submitted by each student. An internal Viva shall also
beconducted by a committee constituted by the principal of the college.
10. Award of marks shall be made as per the guidelines of Internship/apprentice/ on the
jobtraining
Procedure
1. A group of students or even a single student could be assigned for a particular
habitation or village or municipal ward, as far as possible, in the near vicinity of their
place of stay, so as to enable them to commute from their residence and return back by
evening or so.
2. The Community Service Project is a twofold one –
a) First, the student/s could conduct a survey of the habitation, if necessary, in terms of
their own domain or subject area. Or it can even be a general survey, incorporating
all the different areas. A common survey format could be designed. This should not
be viewed as a duplication of work by the Village or Ward volunteers, rather, it
could be another primary source of data.
b) Secondly, the student/s could take up a social activity, concerning their domain or
subject area. The different areas, could be like –

 Agriculture
 Health
 Marketing and Cooperation
 Animal Husbandry
 Horticulture
 Fisheries
 Sericulture
 Revenue and Survey
 Natural Disaster Management
 Irrigation
 Law & Order
 Excise and Prohibition
 Mines and Geology
 Energy
 Internet
 Free Electricity
 Drinking Water

EXPECTED OUTCOMES
BENEFITS OF COMMUNITY SERVICE PROJECT TO STUDENTS
Learning Outcomes
1. Positive impact on students’ academic learning
2. Improves students’ ability to apply what they have learned in “the real world”
3. Positive impact on academic outcomes such as demonstrated complexity of understanding,
problem analysis, problem-solving, critical thinking, and cognitive development
4. Improved ability to understand complexity and ambiguity
Personal Outcomes
1. Greater sense of personal efficacy, personal identity, spiritual growth, and
moraldevelopment
2. Greater interpersonal development, particularly the ability to work well with
others, and build leadership and communication skills
Social Outcomes
1. Reduced stereotypes and greater inter-cultural understanding
2. Improved social responsibility and citizenship skills
3. Greater involvement in community service after graduation
Career Development
1. Connections with professionals and community members for learning and
careeropportunities
2. Greater academic learning, leadership skills, and personal efficacy can lead to
greateropportunity
Relationship with the Institution
1. Stronger relationships with faculty
2. Greater satisfaction with college
3. Improved graduation rates
BENEFITS OF COMMUNITY SERVICE PROJECT TO FACULTY MEMBERS
1. Satisfaction with the quality of student learning
2. New avenues for research and publication via new relationships between faculty
andcommunity
3. Providing networking opportunities with engaged faculty in other disciplines or institutions
4. A stronger commitment to one’s research
BENEFITS OF COMMUNITY SERVICE PROJECT TO COLLEGES AND UNIVERSITIES
1. Improved institutional commitment
2. Improved student retention
3. Enhanced community relations
BENEFITS OF COMMUNITY SERVICE PROJECT TO COMMUNITY
1. Satisfaction with student participation
2. Valuable human resources needed to achieve community goals
3. New energy, enthusiasm and perspectives applied to community work
4. Enhanced community-university relations.
SUGGESTIVE LIST OF PROGRAMMES UNDER COMMUNITY SERVICE PROJECT
The following the recommended list of projects for Engineering students. The lists are not
exhaustive and open for additions, deletions and modifications. Colleges are expected to
focus on specific local issues for this kind of projects. The students are expected to carry
out these projects with involvement, commitment, responsibility and accountability. The
mentors of a group of students should take the responsibility of motivating, facilitating, and
guiding thestudents. They have to interact with local leadership and people and appraise the
objectives and benefits of this kind of projects. The project reports shall be placed in the
college website for reference. Systematic, Factual, methodical and honest reporting shall
be ensured.
For Engineering Students
1. Water facilities and drinking water availability
2. Health and hygiene
3. Stress levels and coping mechanisms
4. Health intervention programmes
5. Horticulture
6. Herbal plants
7. Botanical survey
8. Zoological survey
9. Marine products
10. Aqua culture
11. Inland fisheries
12. Animals and species
13. Nutrition
14. Traditional health care methods
15. Food habits
16. Air pollution
17. Water pollution
18. Plantation
19. Soil protection
20. Renewable energy
21. Plant diseases
22. Yoga awareness and practice
23. Health care awareness programmes and their impact
24. Use of chemicals on fruits and vegetables
25. Organic farming
26. Crop rotation
27. Floury culture
28. Access to safe drinking water
29. Geographical survey
30. Geological survey
31. Sericulture
32. Study of species
33. Food adulteration
34. Incidence of Diabetes and other chronic diseases
35. Human genetics
36. Blood groups and blood levels
37. Internet Usage in Villages
38. Android Phone usage by different people
39. Utilization of free electricity to farmers and related issues
40. Gender ration in schooling level- observation.

Complimenting the community service project, the students may be involved to take up some
awareness campaigns on social issues/special groups. The suggested list of programmes are;
Programmes for School Children
1. Reading Skill Programme (Reading Competition)
2. Preparation of Study Materials for the next class.
3. Personality / Leadership Development
4. Career Guidance for X class students
5. Screening Documentary and other educational films
6. Awareness Programme on Good Touch and Bad Touch (Sexual abuse)
7. Awareness Programme on Socially relevant themes.

Programmes for Women Empowerment


1. Government Guidelines and Policy Guidelines
2. Womens’ Rights
3. Domestic Violence
4. Prevention and Control of Cancer
5. Promotion of Social Entrepreneurship

General Camps
1. General Medical camps
2. Eye Camps
3. Dental Camps
4. Importance of protected drinking water
5. ODF awareness camp
6. Swatch Bharat
7. AIDS awareness camp
8. Anti Plastic Awareness
9. Programmes on Environment
10. Health and Hygiene
11. Hand wash programmes
12. Commemoration and Celebration of important days

Programmes for Youth EmpowermentLeadership


1. Anti-alcoholism and Drug addiction
2. Anti-tobacco
3. Awareness on Competitive Examinations
4. Personality Development
Common Programmes
1. Awareness on RTI
2. Health intervention programmes
3. Yoga
4. Tree plantation
5. Programmes in consonance with the Govt. Departments like –
i. Agriculture
ii. Health
iii. Marketing and Cooperation
iv. Animal Husbandry
v. Horticulture
vi. Fisheries
vii. Sericulture
viii. Revenue and Survey
ix. Natural Disaster Management
x. Irrigation
xi. Law & Order
xii. Excise and Prohibition
xiii. Mines and Geology
xiv. Energy

Role of Students:
1. Students may not have the expertise to conduct all the programmes on their own.
Thestudents then can play a facilitator role.
2. For conducting special camps like Health related, they will be coordinating with
theGovernmental agencies.
3. As and when required the College faculty themselves act as Resource Persons.
4. Students can work in close association with Non-Governmental Organizations like
LionsClub, Rotary Club, etc or with any NGO actively working in that habitation.
5. And also, with the Governmental Departments. If the programme is rolled out, the
District Administration could be roped in for the successful deployment of the
programme.
6. An in-house training and induction programme could be arranged for the faculty
andparticipating students, to expose them to the methodology of Service Learning.

Timeline for the Community Service Project Activity

Duration: 8 weeks
1. Preliminary Survey (One Week)
a) A preliminary survey including the socio-economic conditions of the allotted
habitationto be conducted.
b) A survey form based on the type of habitation to be prepared before visiting the
habitation with the help of social sciences faculty. (However, a template could be
designed for different habitations, rural/urban.
c) The Governmental agencies, like revenue administration, corporation and
municipal authorities and village secretariats could be aligned for the survey.

2. Community Awareness Campaigns (Two Weeks)


Based on the survey and the specific requirements of the habitation, different
awareness campaigns and programmes to be conducted, spread over two weeks of
time. The list of activities suggested could be taken into consideration.
3. Community Immersion Programme (Four Weeks)
Along with the Community Awareness Programmes, the student batch can also
work with any one of the below listed governmental agencies and work in tandem with
them. This community involvement programme will involve the students in exposing
themselves to the experiential learning about the community and its dynamics.
Programmes could be in consonance with the Govt. Departments.

4. Community Exit Report (One Week)


During the last week of the Community Service Project, a detailed report of the
outcome of the 8 weeks works to be drafted and a copy shall be submitted to the local
administration. This report will be a basis for the next batch of students visiting that
particular habitation. The same report submitted to the teacher-mentor will be
evaluated by the mentor and suitable marks are awarded for onward submission to the
University.
Throughout the Community Service Project, a daily log-book need to be maintained by
the students batch, which should be countersigned by the governmental agency
representative and the teacher-mentor, who is required to periodically visit the students
and guide them.
MALPRACTICES RULES
DISCIPLINARY ACTION FOR / IMPROPER CONDUCT IN EXAMINATIONS
Nature of Malpractices/Improper conduct Punishment
If the candidate:
Possesses or keeps accessible in examination hall,any Expulsion from the examination hall and cancellation of the
paper, note book, programmable calculators, Cell performance in that subject only.
phones, pager, palm computers or any other form of
material concerned with or related to the subject of the
1. (a) examination (theory or practical) in which he is
appearing but has not made use of (material shall
include any marks on the body of the candidate which
can be used as an aid in the subject of the
examination)
Gives assistance or guidance or receives it from any Expulsion from the examination hall and cancellation of the
other candidate orally or by any other body language performance in that subject only of all the candidates involved.
(b) methods or communicates through cell phones with In case of an outsider, he will be handed over to the police and
any candidate or persons in or outside the exam hall a case is registered against him.
in respect of any matter.
Has copied in the examination hall from any paper, Expulsion from the examination hall and cancellation of the
book, programmable calculators, palm computers or performance in that subject and all other subjects the candidate
any other form of material relevant to the subject of has already appeared including practical examinations and
2. the examination (theory or practical) in which the project work and shall not be permitted to appear for the
candidate is appearing. remaining examinations of the subjects of that Semester/year.
The Hall Ticket of the candidate is to be cancelled and sent to
the University.
Impersonates any other candidate in connection with The candidate who has impersonated shall be expelled from
the examination. examination hall. The candidate is also debarred and forfeits the
seat. The performance of the original candidate who has been
impersonated, shall be cancelled in all the subjects of the
examination (including practicals and project work) already
appeared and shall not be allowed to appear for examinations
3. of the remaining subjects of that semester/year. The candidate
is also debarred for two consecutive semesters from class work
and all University examinations. The continuation of the course
by the candidate is subject to the academic regulations in
connection with forfeiture of seat. If the imposter is an outsider,
he will be handed over to the police and a case is
registered against him.
Smuggles in the Answer book or additional sheet or Expulsion from the examination hall and cancellation of
4.
takes out or arranges to send out the question paper performance in that subject and all the other subjects the
during the examination or answer book or additional candidate has already appeared including practical examinations
sheet, during or after the examination. and project work and shall not be permitted for the remaining
examinations of the subjects of that semester/year. The
candidate is also debarred for two consecutive semesters from
class work and all University examinations. The continuation of
the course by the candidate is subject to the academic
regulations in connection with
forfeiture of seat.
Uses objectionable, abusive or offensive language in Cancellation of the performance in that subject.
the answer paper or in letters to the examiners or writes
5.
to the examiner requesting him to award pass marks.

Refuses to obey the orders of the Chief In case of students of the college, they shall be expelled from
Superintendent/Assistant – Superintendent / any examination halls and cancellation of their performance in that
officer on duty or misbehaves or creates disturbance of subject and all other subjects the candidate(s) has (have) already
any kind in and around the examination hall or appeared and shall not be permitted to appear for the remaining
organizes a walk out or instigates others to walk out, examinations of the subjects of that semester/year. The
or threatens the officer-in charge or any person on duty candidates also are debarred and forfeit their seats. In caseof
in or outside the examination hall of any injury to his outsiders, they will be handed over to the police and a policecase
6. person or to any of his relations whether by words, is registered against them.
either spoken or written or by signs or by visible
representation, assaults the officer-in-charge, or any
person on duty in or outside the examination hall or
any of his relations, or indulges in any other act of
misconduct or mischief which result in damage
to or destruction of property in the examination hall
or any part of the College campus or engages in any
other act which in the opinion of the officer on duty
amounts to use of unfair means or misconduct or has
the tendency to disrupt the orderly conduct of the
examination.

Leaves the exam hall taking away answer script or Expulsion from the examination hall and cancellation of
intentionally tears the script or any part thereof inside performance in that subject and all the other subjects the
or outside the examination hall. candidate has already appeared including practical examinations
and project work and shall not be permitted for the remaining
examinations of the subjects of that semester/year. The
7.
candidate is also debarred for two consecutive semesters from
class work and all University examinations. The continuation of
the course by the candidate
is subject to the academic regulations in connection with
forfeiture of seat.
Possess any lethal weapon or firearm in the Expulsion from the examination hall and cancellation of the
examination hall. performance in that subject and all other subjects the candidate
has already appeared including practical examinations and
8. project work and shall not be permitted for the remaining
examinations of the subjects of that semester/year. The
candidate is also debarred and forfeits the seat.
If student of the college, who is not a candidate for the Student of the colleges expulsion from the examination hall and
particular examination or any person not connected cancellation of the performance in that subject and all other
with the college indulges in any malpractice or subjects the candidate has already appeared including
improper conduct mentioned in clause 6 to 8. practical examinations and project work and shall not be
permitted for the remaining examinations of the subjects of that
9.
semester/year. The candidate is also debarred and forfeits the
seat.
Person(s) who do not belong to the College will be handed
over to police and, a police case will be registered
against them.
Comes in a drunken condition to the examination Expulsion from the examination hall and cancellation of the
hall. performance in that subject and all other subjects the candidate
10. has already appeared including practical examinations and
project work and shall not be permitted for the remaining
examinations of the subjects of that semester/year.
Copying detected on the basis of internal evidence, Cancellation of the performance in that subject and all other
such as, during valuation or during special scrutiny. subjects the candidate has appeared including practical
11.
examinations and project work of that semester/year
examinations.
If any malpractice is detected which is not covered in
the above clauses 1 to 11 shall be reported to the
12.
University for further action and impose suitable
punishment.

Malpractices identified by squad or special invigilators


1. Punishments to the candidates as per the above guidelines.
2. Punishment for institutions: (if the squad reports that the college is also involved in
encouragingmalpractices)
(i) A show because notice shall be issued to the college.
(ii) Impose a suitable fine on the college.
(iii) Shifting the examination centre from the college to another college for a specific period of not
lessthan one year.
*****

You might also like