JC 50
JC 50
2 dimension coordinate
type with optional
mounting plate
Dimensions (mm)
*In case of handle pattern type Q, angle becomes ±20º ~ ±25º from center position
35º *Abt.
30º ~
30º ~
*Abt. 35º
ø25
Abt. ø70
X axis
ø22 potentiometer
Abt.103
Y axis
Panel thickness
potentiometer
Abt.42
< 3.2
Abt.37
M3 (4X)
12 deep Abt. 44
ø55
Abt. 9
Abt. 40
In case of single micro-switch,
Abt. 16
Type: I X O Q
Y Y Y Y
X X X
Handle Types
ø25
55
68
Abt. 127
Abt. 132
Abt. 103
Cams
*Activation angle can be specified by customer. Ex. at end
of travel, 50% of travel, etc.
Micro-switches
Detent Mechanism(s)
Detents provide operator with a distinct tactile feedback of
a specific position. In case of configurations without spring
return to center (position hold with increased operating
friction), tactile sense of center position is missing. A center
detent can be utilized to provide the operator with this positive
feel.
In joystick configurations with or without spring return to center,
detents can be spaced along the X and/or Y axis to provide a
specific feedback of a specified position.
In case of spring return to center types, detent force can be adjusted
to either maintain a specified position without operator or allow cam
handle to return to center. Please consult us for specific spring loaded
applications. bearing
ø44 hole
Dimensions: mm
55 ° 45 °
4(x) ø3.5 hole
29
Dimensions: mm
Mounting
Thickness: 2mm
4-M3
screw
1. Turn up rubber boot to
dust-proof rubber see fixing panel
80 ±0.5
70 ±0.2
70 ±0.2
80
80 ±0.5
±0.5
Dimensions: mm
Wiring Details
For X-axis: + direction Pushbutton handle lead wires are AWG26, 300mm
For Y-axis: + direction in length.
2