SolidCAM2023 SP3 & SP3 HF1 Release Notes

Author: Sidney Eisner

Written: May 20, 2024

Page 1 of 3 Last updated: May 20, 2024

Bugs
SP3
SOL-18415 VMID || Isometric in the preview window is not Isometric Fixed
SOL-20023 machine preview / system crashes Fixed
SOL-25845 Turbo 3D HSM || Unified || Constant Z rest || Unknown Exception. Fixed
CAM Settings || Cleanup CAM-Part || Cleanup on Part closing for Fixtures does not Fixed
SOL-26027 affect CAM-Part
SOL-27103 Machine Simulation || Incorrect simulation when using sub-tool Fixed
SOL-27384 VMID || Stations || Changing properties across multiple Stations Fixed
SOL-27394 machsim & cs || part jump from ms Fixed
SOL-27670 iRough+iFinish || No finishing toolpath in circular pocket Fixed
SOL-27749 Machine Simulation || Part position is not correct Fixed
HoleWizard Process || Through Holes || Depth is not taking correctly if holes Fixed
SOL-27780 are present at different height
SOL-27793 Customer Parts issue || Unable to define CAM process and Operations Fixed
SOL-27809 The CAMPart cannot open after crash Fixed
SOL-27821 Settings || New envelop method is not greyed Fixed
SOL-27824 Radius in CAM tree appear as 7_999999 whereas its 0.8 in tookit Fixed
MCO || Release stock option should not available if stock is not connected to Fixed
SOL-27826 selected PM
SOL-27852 Machine Simulation || Incorret holder representation in Machine Simulation Fixed
SOL-27855 PP change || Clamping is reset Fixed
SOL-27858 Install | SolidEdge Polish Language | Facemilling operation | GUI Issues Fixed
SOL-27859 G-code || Generate per operation option does not work correctly Fixed
SOL-27864 Mesh based technologies || SolidCAM crashes upon creating new operation Fixed
SOL-27899 SolidCAM 2023 Sp2 hf2 || Shopfloor Editor does not start Fixed
SOL-27915 Fixtures || Chuck Jaws || Impossible to change the number of Jaws Fixed
SOL-27939 Edge Breaking || Incorrect Chamfer tool is being sent to MW Fixed
SOL-27955 MCO || Submachine item || Parameter loss Fixed
SOL-28016 Fixture in Setup || Wrong conversion from SC2022 on Grob Machine Fixed
SOL-28032 Thread Whirling || Wrong tool-path in tool-path preview and all simulations Fixed
G-code || Missing spin value in @m_feed_spin and in lead-in and lead-out when Fixed
SOL-28061 holder is self-driven
SOL-28070 GUI || Overlaping elements in Italian version Fixed
Templates || Pocket Operation || Unable to select the geometry by face if we Fixed
SOL-28082 load the template
SOL-28090 G-code || Missing @setup procedure if only particular operation is generated Fixed
ToolKit || Cutting point || Unable to calculate operation if cutter is in inch and Fixed
SOL-28132 part is in metric
G-code || Variable tool_offset takes value from GUI and not being converted Fixed
SOL-28133 correctly when part is in one system and tool is defined in other
SOL-28134 Stock Definition || Extruded Boundary || Stock is not updated if we modified Fixed
 Release notes

the design model

SOL-28138 G-code || THSR output mixed @line and @line_5x Fixed
ToolKit || Tool breakage fields do not save value on clicking only Select button Fixed
SOL-28149 in ToolKit
CAM-Part || Stock Definition || 3D Model Stock will produce strange values in Fixed
SOL-28151 Trace
SOL-28157 Region of interest || Geometry || I am not able to select whole geometry Fixed
SOL-28162 MCO || Submachine movement get corrupted on adding and removing fixture Fixed
SOL-28169 General || UI issues with the location of elements Fixed
SOL-28181 Setup || Fields behave differently on Fixture mounting and Part mounting page Fixed
SOL-28201 ToolKit - Red Point not seem in the right place Fixed
SOL-28212 Machine simulation || Incorrect Machine Simulation of wrapped operation Fixed
SOL-28240 G-code || Wrong opos values for multi axis operation Fixed
SOL-28247 G-code || Last arc divided to two smaller arcs Fixed
SOL-28256 ToolKit || Tools are not correct after converting from one machine to another Fixed
VMC || Part convert || MCO || Axis Movement with Mach axis values lost Fixed
SOL-28258 function
Cam Part || Unable to calculate operation after converting from one to another Fixed
SOL-28274 machine
SOL-28359 MCO || SolidCAM crashes on opening MCO Fixed
SOL-28369 Adding a function to get a fixture that is used in a setup on a specific table. Fixed
SOL-28371 Swiss\wrong submashine move Fixed
SOL-28373 Template || Depth is not correct in drill Fixed
ToolKit || Icon is orange without the reason when mounting tool from one Fixed
SOL-28391 station to another
SOL-28392 ToolKit || Different behavior on drag&drop and on mount Fixed
SOL-28396 MCO || Incorrect turret movement Fixed
SOL-28398 MCO || SolidCAM crashes on adding MCO cycle Fixed
SOL-28399 ModuleWorks|Error message at machine simulation start Fixed
SOL-28404 Gcode || very strange number in BLK FORM in GCode Fixed
XML Interface - Obsolete XML Format - Remove SolidCAM XML.exportprv from Fixed
SOL-28416 all Installs of 2023
SOL-28420 Operation sequence manager || Wrong clash report Fixed
SOL-28431 Machine preview || Workpiece is rotated without any reason Fixed
SOL-28448 Install||Russian||milling operations-GUI problems Fixed
SOL-28502 Mill || Problem in Chamfer Recognisition Fixed
SOL-28513 Modify the "CUtilitiesProvider::Is4xOnFaceAvailable" function Fixed
Threading tables in 2022 and 2023 SolidCAM have the wrong information for Fixed
SOL-28539 NPT 1 X 11 1/2
SOL-28541 SolidCAM 2023/iMachining/tool feeds from clearance level Fixed
SOL-28544 Setup || Set position is not working correctly
Associative Coordinate system || Center of revolution face option gives wrong Fixed
SOL-28548 position when part is conical
Template || Process template for pocket created by faces is not working Fixed
SOL-28549 correctly
SOL-28556 api_KinematikIPP_get_sim_mw_points returns wrong feedrate Fixed
SOL-28560 profile with variable depth || delta values are added to the depth after sync Fixed
SOL-28577 MCO || Machine Preview || Workpiece displacement Fixed
Page 2 5/20/2024
 Release notes

SOL-28582 Feed and speed bug/ Gear Selecton Fixed

Inch part || User defined Milling/Turning Parameters and Machine Option Fixed
SOL-28606 Parameters should have more than 3 decimal places
G-code || Change bit is T for feed in @line procedure that comes from dividing Fixed
SOL-28619 ARC_3D_5x from pgen
SOL-28671 G-code || Wrong value of down_step variable in @call_proc for Face turning Fixed
Wrong Probe tool positionning for Probe cycle that touch the surface with side Fixed
SOL-28765 of the tool
SOL-28769 Modify MAC origin make loose DELTA value of clearance plane in jobs Fixed
SOL-28812 Transform || Mirror does not take into account Mirror point Fixed
Operation Sequence Manager || Improve Error msg behavior of "Non- Fixed
SOL-28871 calculated operations..."
SOL-28891 MCO || Machine preview shows wrong slave axes movement Fixed
SOL-28927 Operation Sequence Manager | Wrong Axis Control (C1-Axis) Fixed
SOL-28966 GDU | Axis Home Reference | Wrong value with Sub-Machine with Back Spindle Fixed
SolidCAM Simulator || Channel Sync mode || Simulator can crash if it is closed Fixed
SOL-28994 before finishing loading simulation
SP3 HF1
Cimco 2024 || Gcode tries to open in Cimco when Notepad is the settings Fixed
SOL-29049 default
SOL-29015 2D Profile - Crash MachSim Fixed
SOL-29007 ToolKit || a Crash When Using Quick Filter (Second Time) Fixed
SOL-29006 ToolKit || Using Quick Filter For the First Time in Storage Make Them Disappear Fixed
SOL-28792 ToolKit || Log is Not Been Auto Deleted Fixed
SOL-29059 ToolKit || Negative Radius in Slot Mill Fixed
Features
SolidCAM Chatbot – openAI for online help, FAQ, Webinar Videos…… Implemented

Page 3 5/20/2024