Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    Saic A 1013

    Uploaded by

    Ansar Ali Vemmully
    This document is a checklist for inspecting soil improvement using vibro replacement stone columns. It lists acceptance criteria for pre-installation surveys and stone column installation. Criteria include coordinate systems, tolerances, compaction readings, and submitting daily records and reports.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Saic A 1013

    Uploaded by

    Ansar Ali Vemmully
    23 views2 pages
    This document is a checklist for inspecting soil improvement using vibro replacement stone columns. It lists acceptance criteria for pre-installation surveys and stone column installation. Criteria include coordinate systems, tolerances, compaction readings, and submitting daily records and reports.

    Original Title

    SAIC-A-1013

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a checklist for inspecting soil improvement using vibro replacement stone columns. It lists acceptance criteria for pre-installation surveys and stone column installation. Criteria include coordinate systems, tolerances, compaction readings, and submitting daily records and reports.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    23 views2 pages

    Saic A 1013

    Uploaded by

    Ansar Ali Vemmully
    This document is a checklist for inspecting soil improvement using vibro replacement stone columns. It lists acceptance criteria for pre-installation surveys and stone column installation. Criteria include coordinate systems, tolerances, compaction readings, and submitting daily records and reports.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    SAUDI ARAMCO ID/PIEU-15-July-2018-REV. 2018.05.00(Standards Cutoff - May 31,2018) Rev.2018.05.

    00 31-May-18
    SAIC NUMBER DATE APPROVED QR NUMBER
    SAUDI ARAMCO INSPECTION CHECKLIST
    Soil Improvement Vibro Replacement (Stone Columns) Pre-
    SAIC-A-1013 15-Jul-18 CIVIL-
    Installation (Survey) and Installation Inspection
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
    No.

    A Pre- Installation (Survey) Inspection

    Coordinates will be based on the Universal Transverse Mercator (UTM)


    SAES-A-100
    A1 coordinate system and referenced to the International 1924 Ellipsoid, Ain
    Sec. 4.1
    (Ayn) Al Abd 1970 Datum¹.

    Major Plant facilities will be referenced to a local plant grid which in turn is SAES-A-100
    A2
    tied into the UTM coordinate system. Sec. 4.3

    Offshore depth soundings are referenced to Lowest Astronomical Tide SAES-A-100


    A3
    (LAT). Sec. 5.1

    Land elevations are referenced to Mean Sea Level (MSL) vertical datum SAES-A-100
    A4
    for all. Sec. 5.2

    To obtain accurate horizontal ground distances obtained from UTM


    coordinates (or opposite), sea level factor and scale (projection) factor
    corrections (or a locally computed combined factor) shall be applied.
    SAES-A-100
    A5 Scale factor corrections should be calculated on a project by project basis
    Sec. 8.5
    (except for long pipelines which should be segmented). Scale factor
    parameters shall be referenced on
    each sheet.

    ACI 117
    Tolerance for deviation of location shall be 1/24 of diameter but not more
    A6 Sec. 3.2.2.1
    than 3 in (75 mm).

    B Stone Column Installation Inspection

    ACI 117
    B1 Tolerances for the depth of Stone Columns shall be - 2 in. & + 6 in.
    Sec. 5.2.1

    Saudi Aramco: Company General Use


    Ampere readings for S-Vibrator for Compaction of Stone Columns
    B2 Method Statement
    (printout review) shall range between 160 to 180 amps.

    Depth Installation of Stone Column Depth and Compaction shall be as per


    SAES-A-100/ IFC
    B3 issued IFC drawings and referenced to survey markings as conducted
    Drawings
    officially based on SAIC-A-1014.

    Setting out of Stone Column Positions shall be as per issued IFC


    SAES-A-100/ IFC
    B4 drawings and referenced to survey markings as conducted officially based
    Drawings
    on SAIC-A-1014.

    Working Levels (W.L.) have been established before any Soil SAES-A-100/ IFC
    B5
    Improvement Works are commenced. Drawings

    Load Tests have been performed as per approved project specifications


    B6 Method Statement
    and Method Statement.

    Daily Vibro Records have been accomplished and officially submitted to


    B7 Method Statement
    Saudi Aramco representatives.

    Load Test Reports have been accomplished and officially submitted to


    B8 Method Statement
    Saudi Aramco representatives.

    REMARKS:

    REFERENCE DOCUMENTS:
    1- SAES-A-100 - Survey Coordinates, Datum's and Data Formats, 19 February 2018
    2- Approved Method Statement for Soil Improvement
    Contractor / Third-Party Saudi Aramco
    Construction Representative* PMT Representative
    Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Inspector PID Representative


    Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Supervisor Proponent and Others


    Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
    Name, Organization,
    Name, Sign and Date:
    Initials and Date:

    *Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

    Saudi Aramco: Company General Use

    You might also like