Scribd
Upload
42 views4 pages

Connection ET

Uploaded by

Heza 7x
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views4 pages

Connection ET

Uploaded by

Heza 7x
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Copyright 1991, 2006 Caterpillar Inc. All Rights Reserved.

Page 1 of 4

BEM04773 C-15 INDUSTRIAL ENGINE Troubleshooting


Media Number SENR9576-04 Publication Date 2003/09/01 Update Date 2003/09/10

Electronic Service Tools


SMCS Code: 0785

Caterpillar electronic service tools are designed to help the service technician with the diagnosis and
repair of electronic engines. Several tools are available to assist the service technician.

Required Service Tools

Table 1

Required Service Tools


Part Number Description
N/A 4 mm Allen Wrench
6V-2197 Transducer Timing Calibration Probe
7X-1171 Transducer Adapter Timing Calibration Probe
7X-1695 Cable Timing Calibration
9U-7330 Digital Multimeter
or
146-4080 Digital Multimeter RS-232
7X-1710 Multimeter Probes
140-2266 Cable Seventy-Pin Breakout
7X-6370 Adapter Cable As Three-Pin Breakout
167-9225 Harness Service Tool Adapter

1U-5804 Crimp Tool 12 to 18 AWG


175-3700 Connector Repair Kit

Two short jumper wires are needed to check the continuity of some wiring harness circuits by
shorting two adjacent terminals together in a connector. A long extension wire may also be needed to
check the continuity of some wiring harness circuits.

Caterpillar Electronic Technician ( Cat ET)

Cat ET can display the following information:

· Parameters

file://C:\SIS\TMP\sis671prt.html 2/25/2006
Copyright 1991, 2006 Caterpillar Inc. All Rights Reserved. Page 2 of 4

· Event codes
· Diagnostic codes
· Engine configuration
Cat ET can be used by the technician to perform the following functions:

· Diagnostic tests
· Sensor calibrations
· Flash programming
· Set parameters
The following components are required to use Cat ET to service the engine.

Table 2

Required Electronic Service Tools for the Use of Cat ET


Part Number Description
JERD2124 "Electronic Technician Program" ( Cat ET)
JERD2129 "Data Subscription for All Engines and Machines"

171-4400 (1) Communication Adapter Gp


237-7547 (2) Adapter Cable As

(1) The 7X-1700 Communication Adapter Gp may also be used.


(2) The 237-7547 Adapter Cable As is required to connect to the USB port on computers that are not equipped with a
RS232 serial port.

Note: For more information regarding the use of Cat ET and the PC requirements for Cat ET, refer
to the documentation that accompanies your Cat ET software.

Connecting Cat ET and the Communication Adapter II

file://C:\SIS\TMP\sis671prt.html 2/25/2006
Copyright 1991, 2006 Caterpillar Inc. All Rights Reserved. Page 3 of 4

Illustration 2

(1) Personal computer (PC)

(2) 196-0055 Adapter Cable As

(3) 171-4401 Communication Adapter II

(4) 207-6845 Adapter Cable Assembly

Note: Items (2), (3), and (4) are part of the 171-4400 Communication Adapter Gp.

Use the following procedure to connect Cat ET and the Communication Adapter II.

1. Turn the keyswitch to the OFF/RESET position. If the keyswitch is not placed in the OFF/RESET
position, the engine may start.

2. Connect cable (2) between the "COMPUTER" end of communication adapter (3) and the RS232
serial port of PC (1).

file://C:\SIS\TMP\sis671prt.html 2/25/2006
Copyright 1991, 2006 Caterpillar Inc. All Rights Reserved. Page 4 of 4

Note: The 237-7547 Adapter Cable As is required to connect to the USB port on computers that are
not equipped with a RS232 serial port.

3. Connect cable (4) between the "DATA LINK" end of communication adapter (3) and the service
tool connector.

4. Turn the keyswitch to the ON position. If Cat ET and the communication adapter do not
communicate with the ECM, refer to Troubleshooting, "Electronic Service Tool Will Not
Communicate With ECM".

Optional Service Tools


The following table contains service tools that may be helpful to service the engine, but these tools
are not required.

Table 3

Optional Service Tools


Part Number Description
198-4240 Digital Pressure Indicator
or
1U-5470 Engine Pressure Gp
4C-4075 Crimp Tool 4 to 10 AWG

4C-4911 (1) Battery Load Tester


5P-7277 Voltage Tester
6V-9130 (2) Temperature Adapter Multimeter
8T-5319 Connector Tool Group
9S-9082 Engine Turning Tool
155-5176 AC/DC Current Probe

(1) Refer to Special Instructions, SEHS9249, "Use of the 4C-4911 Battery Load Tester for 6, 8, and 12 Volt Lead Acid
Batteries" and Special Instructions, SEHS7633, "Battery Test Procedure".
(2) Refer to Special Instructions, SEHS8382, "Use of the 6V-9130 Temperature Adapter Group".

Copyright 1991, 2006 Caterpillar Inc.


All Rights Reserved.

file://C:\SIS\TMP\sis671prt.html 2/25/2006

You might also like