ELECTRICAL WIRING
INSTALLATION GUIDE
Thank you for choosing a pool our compan.
This manual shows the electrical connection of your new pool step by step. The electrical connection must be made by an authorized electrician and ended with a
revision. Mypooldirect is not responsible for the electrical connection. This guide is for informational purposes only. Each electrical connection must be specifically
consulted with an authorized person according to your accessories pool.
1
ELECTRICAL WIRING CONTENT
INSTALLATION GUIDE
1. Wiring diagram 3
2. Supply cable from the main circuit breaker to the pool circuit breaker 4
3. Cables for pool accessories 5-6
4. Swim jet wiring diagram 7
5. Pool lights wiring diagram 8
In case of any ambiguity, please contact your dealer, or directly to our email: [email protected] and we
will be happy to advise you on the next steps. Please make sure you’re hiring only certified electricians.
2
ELECTRICAL WIRING WIRING DIAGRAM
INSTALLATION GUIDE
3
SUPPLY CABEL ELECTRICAL WIRING
INSTALLATION GUIDE
CIRCUIT BRAKER FOR THE SUPPLY
POOL EQUIPMENT SUPPLY CABEL MAIN CIRCUIT BREAKER
CABEL
Filtration 230V max. 1,00kW + heat pump 230V CYKY 3 J x 4 + CY 6ZŽ +
20A/1/B 25A/3/B
max.15,00kW residual circuit breaker 30 mA.
Filtration 230V max. 1,00kW + heat pump 230V
CYKY 5 J x 6 + CY 6ZŽ - +
max. 15,00kW + swim jet 70m3/380V max. 25A/3/B 32A/3/B
residual circuit breaker 30 mA.
2.2kW
If your main house circuit breaker is 25A / 3 / B or lower, we do not recommend this
installation.
The base plate must be reinforced with steel rod nets with a thickness of at
least 6 mm. It is necessary to ground the steel reinforcement with grounding
strip FeZN 30x4 with lead to main protective busbar.
4
POOL ACCESSORIES CABELS ELECTRICAL WIRING
INSTALLATIONG GUIDE
POOL ACCESSORIES SUPPLY CABEL CIRCUIT BREAKER IN POOL CIRCUIT BREAKER
Pool filtration with salt water treatment (Cable from the pump and
from the chlorinator goes to circuit breaker) CYKY 3 J x 1,5 6A/1/C
CYSY 5 J X 2,5 - from the pump to the
pneumatic switch
Swim jet CYKY 5 J x 2,5 - from the pneumatic switch
10A/3/C
to pool circuit breaker
Cable for main protective connection - CYA
6ZŽ
CYKY 3 J x 2.5 max. 12kW
Hear pump 20A/1/C
CYKY 3 J x 4 max. 18kW
The circuit breaker capacity must be calculated
Pool lights up to 50W
CYKY 3 J x 2 regarding the real sum of W.
(Cable between light and safety transformer)
The circuit breaker capacity must be calculated
Pool lights up to 100W
CYKY 2 J x 4 regarding the real sum of W.
(Cable between light and safety transformer)
The circuit breaker capacity must be calculated
Pool lights up to 300W
CYKY 2 J x 6 regarding the real sum of W.
(Cable between light and safety transformer)
5
ELECTRICAL WIRING POOL EQUIPMENT
INSTALLATION GUIDE
POOL ELECTRO BOX
SAFETY TRANSFORMER FOR POOL
LIGHTS
WATER TREATMENT
UNIT
HEAT PUMP
FILTRATION PUMP
6
ELECTRICAL WIRING SWIM JET
INSTALLATION GUIDE
AIR SUCTION
SWIM JET PUMP
PNEUMATIC SWITCH BREAKER
7
ELECTRICAL WIRING POOL LIGHTS
INSTALLATION GUIDE
WATERTIGHT CONNECTION BOX FOR POOL
LIGHT
8
In case of any questions, please don’t hesitate to contact one of our sales representative,
who will be happy to help you.
https://mypooldirect.co.uk
[email protected]
COPYRIGHT © 2021 ALL RIGHTS RESERVED
