Grundfos SEV658022250D 2.2kW2P [email protected]

Company name: NTK Industrial (SG) Pte Ltd
Created by: Wei Heng

Phone: +65 8118 0992
Email: [email protected]
Date: 21/05/2024
Qty. Description
1 SEV.65.80.22.2.50D
Note! Product picture may differ from actual product

Product No.: 96048169
Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened
raw sewage.
The pump is designed for intermittent and continous operation. The liquidless and maintenance free cooling system
ensures that the pump can be used for submerged or dry installation. The efficient SuperVortex impeller provides
passage of long fibres and solids up to 65 mm and is suitable for wastewater with a dry matter content of up to 5 %. A
unique stainless-steel clamp assembling system enables quick and easy disassembly of the pump from the motor
unit for service and inspection. No special tools are required.
Further product details
The pump is suitable for both temporary and permanent installation either as free-standing on ring stand, on base
stand, on brackets or on an auto-coupling system.
Pump
The pump is fitted with an easy-to-clean stainless-steel motor sleeve (EN 1.4301) that is extremely robust and
impact-resistant. Pump housing and impeller is made of cast iron (EN-GJL-250).
The SuperVortex impeller is a symmetrical multivane winglet impeller.
The design ensures a flow entirely outside the impeller providing limited contact between the impeller and the
pumped liquid.
This ensures that long fibres, rags and more passes freely through the pump without getting caught and without
causing clogging or jamming.
The shaft seal consists of two mechanical seals that ensure a reliable sealing between the pumped liquid and motor.
The shaft seals are incorporated in a single-unit cartridge shaft seal system that is easy to replace in the field without
use of special tools.
The combination of the primary and secondary seals in a cartridge shaft seal system results in a shorter assembly
length compared to conventional shaft seals.
- Primary seal: Silicon carbide/silicon carbide (SiC/SiC)
- Secondary seal: Carbon/Ceramics
The shaft seal is bidirectional, meaning it operates correctly in case of backflow through the pump.
The pump is approved according to EN12050-1.

Motor
Printed from Grundfos Product Centre [2024.20.001] 1

Phone: +65 8118 0992
Date: 21/05/2024
Qty. Description
1 The motor is a watertight, totally encapsulated motor supplied with a 10 m power cable. The stainless steel plug is
fastened with a union nut. This nut and the O-rings provide sealing against ingress of the liquid.
The plug is polyurethane-embedded, ensuring a watertight and durable seal around the leads of the cable. This
prevents the ingress of water into the motor through the cable in case of cable breakage or adverse handling in
connection with installation or service.
A compact motor construction with a short shaft reduces vibrations, resulting in an increased efficiency and lifetime of
the shaft seal and ball bearings.
The motor features built-in thermal protection to protect the motor against overheating and ensure the reliability.
A solid-block stator housing with built-in cooling conduits, efficiently transfers excess heat to the pumped liquid via a
solid cast intermediate cooling flange, that is in direct contact with the pumped liquid.
This allows for continuous operation even in a dry installation.
An extremely robust impact-resistant stainless-steel jacket with an easy-to-clean smooth surface is fitted on the top of
the solid-block stator housing.
The pump is designed for speed-controlled operation to keep the energy consumption at a minimum.
To avoid the risk of sedimentation in the pipes, we recommend that you operate the speed-controlled pump within a
speed range of 30 % to 100 % and at a flow rate above 1 m/s.
Controls:
Moisture sensor: N
Water-in-oil sensor: N
Temp. sensor: N
Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Actual calculated flow: 6.75 l/s
Maximum flow: 12.5 l/s
Resulting head of the pump: 10.22 m
Type of impeller: SUPER VORTEX
Max. Particle: 65 mm
Max. hydraulic efficiency: 30 %
Approvals: EN12050-1
Curve tolerance: ISO9906:2012 3B2
Cooling jacket (Yes/No): Y
Materials:
Pump housing: Cast iron
EN 1561 EN-GJL-250
Impeller: Cast iron
EN 1561 EN-GJL-250
Shaft seal: SiC/SiC
Secondary shaft seal: CER/CARNBR
Installation:
Range of ambient temperature: 0 .. 40 °C
Maximum operating pressure: 6 bar
Type of inlet connection: DIN
Type of outlet connection: DIN
Size of inlet connection: DN 80
Size of outlet connection: DN 80
Pressure rating for outlet connection: PN 10
Maximum installation depth: 7m
Inst dry/wet: DRY/SUBMERGED
Auto coupling: 96090993

Phone: +65 8118 0992
Date: 21/05/2024
Qty. Description
1 Electrical data:
Power input P1: 2.8 kW
Rated power - P2: 2.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415 V
Voltage tolerance: +6/-10 %
Max starts per hour: 20
Rated current: 5A
Rated current at 3/4 load: 3.8 A
Rated current at 1/2 load: 3A
Starting current: 37 A
Rated current at no load: 2A
Cos phi - power factor: 0.86
Cos phi - p.f. at no load: 0.21
Cos phi - p.f. at 3/4 load: 0.81
Rated speed: 2895 rpm
Locked-rotor torque: 18 Nm
Breakdown torque: 23 Nm
Moment of Inertia: 0.0088 kg m²
Motor efficiency at full load: 77 %
Motor efficiency at 3/4 load: 76.6 %
Number of poles: 2
Method of start: Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Explosion proof: no
Built-in motor protection: PTO
Thermal protection: Internal
Power cable type: Lyniflex
Length of power cable: 10 m
Power plug: No plug
Others:
Net weight: 108 kg
Gross weight: 120 kg
Danish VVS No.: 391288174
Country of origin: AR
Custom tariff no.: 84137010

Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
H SEV.65.80., 3*400 V, 50Hz eta
[m] [%]
18
16
14
12 60
10 50
8 40
6 30
4 20
2 10
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [l/s]
Q = 6.75 l/s H = 10.22 m
Es = 0.1156 kWh/m³ Liquid temperature during operation = 20 °C
Eta pump = 31.2 % Eta pump+motor = 24 %
P NPSH
[kW] [m]
3.0 12
P1
2.5 10
2.0 P2 8
1.5 6
1.0 4
0.5 2
0.0 0
P1 = 2.809 kW
P2 = 2.162 kW
NPSH = 1.11 m

Phone: +65 8118 0992
Date: 21/05/2024
H SEV.65.80., 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: SEV.65.80.22.2.50D 18
Product No: 96048169 16

EAN number: 5700395064773
14
Technical:
Actual calculated flow: 6.75 l/s 12 60
Maximum flow: 12.5 l/s 10 50
Resulting head of the pump: 10.22 m
8 40
Maximum head: 18.2 m
Type of impeller: SUPER VORTEX 6 30
Max. Particle: 65 mm
4 20
Max. hydraulic efficiency: 30 %
Approvals: EN12050-1 2 10
Curve tolerance: ISO9906:2012 3B2 0 0

0 2 4 6 8 10 12 Q [l/s]
Cooling jacket (Yes/No): Y
Q = 6.75 l/s H = 10.22 m
Materials:
Es = 0.1156 kWh/m³ Eta pump = 31.2 %
Pump housing: Cast iron Eta pump+motor = 24 %
Liquid temperature during operation = 20 °C
Pump housing: EN 1561 EN-GJL-250
P NPSH
Impeller: Cast iron [kW] [m]
P1
Impeller: EN 1561 EN-GJL-250
2.5 10
Shaft seal: SiC/SiC
2.0 8
Secondary shaft seal: CER/CARNBR P2
Installation: 1.5 6
Range of ambient temperature: 0 .. 40 °C 1.0 4

Maximum operating pressure: 6 bar 0.5 2
Type of inlet connection: DIN 0.0 0
Type of outlet connection: DIN P1 = 2.809 kW
Size of inlet connection: DN 80 P2 = 2.162 kW
NPSH = 1.11 m
Size of outlet connection: DN 80 DN80
DN80
M16
397
247
103
767
320
65
170
Pressure rating for outlet connection: PN 10

Maximum installation depth: 7m DN80
170
Inst dry/wet: DRY/SUBMERGED 320
65
Installation: H/V
Auto coupling: 96090993 M16
Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 20 °C
767
Density: 998.2 kg/m³

Electrical data:
Power input P1: 2.8 kW
103
Rated power - P2: 2.2 kW 247
DN80
Mains frequency: 50 Hz 397
Rated voltage: 3 x 380-415 V

Voltage tolerance: +6/-10 %
Yellow/Green
Max starts per hour: 20 1 2
Rated current: 5A
6 3
Rated current at 3/4 load: 3.8 A
Rated current at 1/2 load: 3A 5 4
Starting current: 37 A
Rated current at no load: 2A L1 L2 L3
Cos phi - power factor: 0.86

Cos phi - p.f. at no load: 0.21
Cos phi - p.f. at 3/4 load: 0.81 1 2 3 4 5 6

Rated speed: 2895 rpm
Option
Locked-rotor torque: 18 Nm
Breakdown torque: 23 Nm 3

Phone: +65 8118 0992
Date: 21/05/2024
Description Value
Moment of Inertia: 0.0088 kg m²
Motor efficiency at full load: 77 %
Number of poles: 2
Method of start: Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Explosion proof: no
Built-in motor protection: PTO
Thermal protection: Internal
Power cable type: Lyniflex
Length of power cable: 10 m
Power plug: No plug
Controls:
Control box: N
Moisture sensor: N
Water-in-oil sensor: N
Temp. sensor: N
Others:
Net weight: 108 kg
Gross weight: 120 kg
Danish VVS No.: 391288174
Country of origin: AR
Custom tariff no.: 84137010

Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
DN80
170
65 320
M16
767
103
DN80
247
397
Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
557
408
81
48.3
868
80 171
345 97
M16 13
220 95
160
750


Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
10
350
175
18
726
103 DN80
447
200
623 M16


Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
397
213
269 156
19
247
1047
80
379
276
111
83 76 M16


Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
530
280
18
899
80
373
128
330


Phone: +65 8118 0992
Date: 21/05/2024
96048169 SEV.65.80.22.2.50D 50 Hz
Yellow/Green
1 2
6 3
5 4
L1 L2 L3
1 2 3 4 5 6
Option

Grundfos SEV658022250D 2.2kW2P [email protected]

Uploaded by

Copyright:

Available Formats

Grundfos SEV658022250D 2.2kW2P [email protected]

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grundfos SEV658022250D 2.2kW2P [email protected]

Uploaded by

Copyright:

Available Formats

Company name: NTK Industrial (SG) Pte Ltd

Created by: Wei Heng

Note! Product picture may differ from actual product

The pump is approved according to EN12050-1.

Printed from Grundfos Product Centre [2024.20.001] 1

Printed from Grundfos Product Centre [2024.20.001] 2

Printed from Grundfos Product Centre [2024.20.001] 3

Printed from Grundfos Product Centre [2024.20.001] 4

Product No: 96048169 16

Curve tolerance: ISO9906:2012 3B2 0 0

Range of ambient temperature: 0 .. 40 °C 1.0 4

Pressure rating for outlet connection: PN 10

Density: 998.2 kg/m³

Mains frequency: 50 Hz 397

Rated voltage: 3 x 380-415 V

Cos phi - power factor: 0.86

Cos phi - p.f. at 1/2 load: 0.72

Printed from Grundfos Product Centre [2024.20.001] 5

Printed from Grundfos Product Centre [2024.20.001] 6

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.20.001] 7

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.20.001] 8

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.20.001] 9

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.20.001] 10

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.20.001] 11

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.20.001] 12

You might also like