Quick Spray Polyurea Vs Hybrid

A Paper presentation on Pure Polyurea vs.
Hybrid polyurea / Polyurethanes & Epoxies
By: Ashish Kumar (Sales & Operations manager India)
VOELKEL INDUSTRIE PRODUKTE GMBH LOHENSTR. 11 D-82166 GRFELFING (MUNICH) GERMANY

T. +49 (0)89- 895 5809 0 F. +49 (0)89- 895 5809 99 Website: www.vip-gmbh.com / www.polyurea-solutions.com Email id: [email protected] / [email protected]
Milestones
2011 1983 2000 2004
2009
2010
VIP Founda tion German y

Trading company for Adhesives for the automotive aftermarket
1990 1999
Expansion into industrial applications of innovative adhesive technologies
Polyurea Coating Sytems Market Launch Intl. Expansion
VIP India
Sales team, distribution & Applicator network
Specialization and inhouse R&D of 2K adhesives, sealants & coatings
VIP Middle East LLC local Manufacturing

of Polyurea Systems in Dubai
VIP SE Asia
Sales team, distribution & Applicator network
What is POLYUREA?
A high reactive performance coating 2 liquid components (Part A + B) Mixing Ratio 1:1 (volume) Part A - Isocyanate Pre-Polymer Part B - Amine terminated resin blend Rapid cure from liquid to plastic coating Flexible Waterproof Has outstanding properties Designed to protect various surfaces
POLYUREA beats traditional coatings
What is POLYUREA?
Definition of Polyurea by the Polyurea Development Association (PDA), 2000 A pure polyurea coating/ elastomer is derived from the reaction product of an isocyanate component and a resin blend component such as amine-terminated polymer resins, and/or amine-terminated chain extenders. The isocyanate can be aromatic or aliphatic in nature. It can be a monomer, a polymer, or any variant reaction of isocyanates, a quasi-prepolymer or a prepolymer. The prepolymer, or a quasi-pre polymer, can be made of an amine-terminated polymer resin.
What is POLYUREA?
Definition of Polyurea by the Polyurea Development Association (PDA), 2000 The resin blend must be made up of amine-terminated polymer resins, and/or amine terminated chain extenders. The amine-terminated polymer resins will not have any intentional hydroxyl groups. Any hydroxyls are the result of incomplete conversion to the amine-terminated polymer resins. The resin blend may also contain additives or nonprimary components. These additives may contain hydroxyls, such as pre-dispersed pigments in a polyol carrier. Normally, the resin blend will not contain a catalyst.
Polyurea components
Polyurea is an elastomer made from two reactive components A-component Isocyanate prepolymers (MDI based for aromatic systems, HDI- or IPDI-based for aliphatic systems) B-component Amines (polyether amines) Amine chain extenders Additives (e.g. pigments, defoamers, flame retardants, etc.)
In case of pure polyurea B component is made up of amine-terminated polymer resins, and/or amine terminated chain extenders as more than 80% of the total content of component B.
Functions of components
Amine chain extenders Faster film property development With high strength. Excellent UV and color stability of the film Easy to formulate with various amine systems. Slows down gel time allowing for better adhesion. Flow and leveling maintains better film stability at elevated temperatures.
Polyetheramines Used as curing agents. Films hardening agents. If very high hardness is desired the trifunctional Polyether amine is required for a stronger cross linking. Polytetra hydrofura amine leads to reduced moisture uptake and swelling as well as to improved abrasion resistance.
Additives Pigments for coloration Flame retardants Defoaming or deaerating agents Other processing auxiliaries
POLYUREA
Properties
Properties
Working times Atmospheric Moisture sensitivity Elongation Colour stability
Polyurethane
Fast Yes 1000% Average, yellowing
Epoxy
Slow Yes Tend to get brittle Average, yellowing
Pure Polyurea VIP QuickSpray

Extremly fast (5 seconds to 15 seconds) No, moisture insensitve Upto 1000% (Flexibile with high tensile strenght so does no crack) Aromatics: average Aliphatics: 100% UV resistant and colour stable < 6mg, 500g/1000 cycles (ASTM D-4060) More than 20N/MM2 Excellent (Can resist upto 20% H2SO4 also) Yes (Ecofriendly) From -50C to +150C Yes, unlimited mil thickness with one layer Average 1L = 1m2 = 1mm Excellent 100%
Abrasion resistance Superior tensile strength Chemical resistance VOC free Temperature resistance Seamless Coverage Duratbility Solid Content
>15 mg , 500g/1000 cycles (ASTM D-4060) About 8-10 N/MM2 Good No From -30C to +120C No Different Good 50-100%
< 6mg, 500g/1000 cycles (ASTM D-4060) 15-20 N/MM2 Very Good No From -20C to +110C No Different Average 50-100%
Pure POLYUREA vs. Hybrid
Properties
Working times Moisture sensitivity Film quality Abrasion resistance Superior tensile strength Chemical resistance Temperature resistance of flim Temp resistance during application Shel life Duration Film life Solid Content
Hydrid polyurea
Fast Sensitive to atmospheric moisture May have pinholes Average Good Good From -30C to +120C
Pure Polyurea VIP QuickSpray

Adjustable (5 seconds to 8 mins) Atmospheric moisture insensitve Free from pin holes Very good < 6mg ( C17,500gms/1000 cycles) Excellent ( 23 N/mm sq) Very Good From -50C to +150C
From 5C to +45C
From -10C to +70C
6-9 months Approx 4-5 years 80-100%
12 months Can go from 10 to 20 years easily 100%
POLYUREA
The System
Top coat (aliphatic)
POLYUREA Coat (aromatic)
Primer
Substrate Substrate Substrate Substrate Substrate
Pure POLYUREA
Properties
Thermal resistance
C +150 F +302
+60 Applicable without having any influence on curing time
+140 Temperature resistance
0 -32 -60
32
-25 -76
Resits thermal shocks

The coating is widely used over polyurethane foam for wall and roofing insulation systems in building, residential housing and temperature controlled containment tanks (wine, oil or chemicals).
Pure POLYUREA
Properties
Superior tensile & structural strength

Excellent adhesion on steel, aluminium, GRP, plastics, concrete, wood, isolating foams High tensile strength (3000psi/ 20MPa) while still having excellent elongation
Deformation from moving substrate shifts will be reduced Thick Polyurea adapts to sonic & vibratory attack for e.g. earthquakes Polyureas will bridge hairline cracks in concrete it act as shock absorber as well because of high tensile strength along with flexibility & elongation.
Pure POLYUREA
Properties
Superfast reaction times

Polyurea's fast reaction time (5-15 seconds) leaves polyurethane and epoxy materials in the proverbial dust. Tremendous savings because of minimum downtime for facilities. Especially important for traffic, manufacturing industry, energy and petrochemical market.
Pure POLYUREA
Properties
High abrasion resistance & flexibility

High abrasion resistance (ASTM 4060-90) Superior elongation (upto 700%) soft, elastic and extremely flexible stays
No cracking when exposed to constant pounding

Tremendous savings because of much longer maintenance intervalls. Epoxies crack and have to be repaired and recoated. Polyureas guarantee a lifetime of 10 years and more after proper application.
Pure POLYUREA
Properties
Moisture insensitivity
Pure Polyurea does not contain polyols or catalyst Pure Polyurea does not contain OH groups The reaction of component A and component B (polyamines) is so fast that the moisture reaction cannot occur Polyurea is unbeatable in climates or regions with high humidity and moisture No pinholes, less costs: No further measures for deaeration and set-up of a closed-porositiy surface
NOTE: Surface preparation is always necessary!
Pure POLYUREA
Properties
High chemical resistance

Polyurea is the choice of facility managers for storage of diluted acids, alkali, salt solution, organic solvents and oils Polyurea provides a strong barrier to spills from reaching the environment Ideal for petrochemistry, chemical processing facilities, (potable) water systems, reservoirs, sewage processing, manholes, holding tanks, secondary containment protection
Pure POLYUREA
Properties
Environmentally-friendly
No VOCs (Volatile Organic Compounds) No solvents No fumes No styrenes 100% solids Less overspray Little to no odor certified for potable water
Water Regulations Advisory Scheme (UK) United States Department of Agriculture (US)
Ideal for the food industries corresponding to strikt styrene emission laws Europe-wide
Divisions & Markets

Industries in green needs pure polyurea
Coatings Systems Water and Waste Water Industry Power & Energy Markets Petrochemical Industry Roofing & Waterproofing Industrial Flooring & Carparks Airports & Heildecks Ship building Industry Infrasctructure, Tunnels & Bridges Automotive, Trucks & Transport Leasure & Theme Parks Swimming Pools & Ponds Furniture and foam Industry
Thanks for your kind attention!!!

Quick Spray Polyurea Vs Hybrid

Uploaded by

Copyright:

Available Formats

Quick Spray Polyurea Vs Hybrid

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Quick Spray Polyurea Vs Hybrid

Uploaded by

Copyright:

Available Formats

A Paper presentation on Pure Polyurea vs.

Hybrid polyurea / Polyurethanes & Epoxies

By: Ashish Kumar (Sales & Operations manager India)

VOELKEL INDUSTRIE PRODUKTE GMBH LOHENSTR. 11 D-82166 GRFELFING (MUNICH) GERMANY

VIP Founda tion German y

Expansion into industrial applications of innovative adhesive technologies

Polyurea Coating Sytems Market Launch Intl. Expansion

Specialization and inhouse R&D of 2K adhesives, sealants & coatings

VIP Middle East LLC local Manufacturing

POLYUREA beats traditional coatings

Pure Polyurea VIP QuickSpray

Pure POLYUREA vs. Hybrid

Pure Polyurea VIP QuickSpray

From -10C to +70C

6-9 months Approx 4-5 years 80-100%

12 months Can go from 10 to 20 years easily 100%

Top coat (aliphatic)

POLYUREA Coat (aromatic)

+60 Applicable without having any influence on curing time

+140 Temperature resistance

Resits thermal shocks

Superior tensile & structural strength

Superfast reaction times

High abrasion resistance & flexibility

No cracking when exposed to constant pounding

NOTE: Surface preparation is always necessary!

High chemical resistance

Divisions & Markets

Thanks for your kind attention!!!

You might also like