/* Private variables ---------------------------------------------------------*/

ADC_HandleTypeDef hadc1;
UART_HandleTypeDef huart1;

/* USER CODE BEGIN PV */

char api[58] = "https://api.thingspeak.com/update?api_key=ID96J7YPEJENY045";
char ATcommand[100];
char toPost[150];
uint8_t rxBuffer[150] = {0};

uint16_t readValue;
float sensitivity = 0.185; // 0.1 for 20A Model
float rawVoltage;
float current;
uint8_t ATisOK;
/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/

void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_ADC1_Init(void);
static void MX_USART1_UART_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/* MCU Configuration--------------------------------------------------------*/
HAL_Init();
SystemClock_Config();
MX_GPIO_Init();
MX_ADC1_Init();
MX_USART1_UART_Init();

/* USER CODE BEGIN 2 */

HAL_ADC_Start(&hadc1);
/* USER CODE END 2 */

/* Infinite loop */
/* USER CODE BEGIN WHILE */
sprintf(ATcommand, "AT+RST\r\n");
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)ATcommand, strlen(ATcommand), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 100);
HAL_Delay(500);

ATisOK = 0;
while (!ATisOK) {
sprintf(ATcommand, "AT+CWMODE_CUR=1\r\n");
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)ATcommand, strlen(ATcommand), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 1000);
if (strstr((char *)rxBuffer, "OK")) {
ATisOK = 1;
}
HAL_Delay(500);
}

ATisOK = 0;
while (!ATisOK) {
sprintf(ATcommand, "AT+CWJAP_CUR=\"POCOX3\",\"1234567a\"\r\n");
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)ATcommand, strlen(ATcommand), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 20000);
if (strstr((char *)rxBuffer, "OK")) {
ATisOK = 1;
}
HAL_Delay(500);
}

ATisOK = 0;
while (!ATisOK) {
sprintf(ATcommand, "AT+CIPMUX=0\r\n");
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)ATcommand, strlen(ATcommand), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 1000);
if (strstr((char *)rxBuffer, "OK")) {
ATisOK = 1;
}
HAL_Delay(500);
}

while (1) {
HAL_ADC_PollForConversion(&hadc1, 1000);
readValue = HAL_ADC_GetValue(&hadc1);
rawVoltage = (float) readValue * 3.3 * 2 / 4095*1.035;
current = (rawVoltage - 2.5) / sensitivity;
HAL_Delay(100);

sprintf(ATcommand, "AT+CIPSTART=\"TCP\",\"api.thingspeak.com\",80\r\n");
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)ATcommand, strlen(ATcommand), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 1000);
HAL_Delay(500);
 sprintf(toPost, "GET %s&field1=%.2f\r\n", api, current);
sprintf(ATcommand, "AT+CIPSEND=%d\r\n", strlen(toPost));
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)ATcommand, strlen(ATcommand), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 1000);
if (strstr((char *)rxBuffer, ">")) {
memset(rxBuffer, 0, sizeof(rxBuffer));
HAL_UART_Transmit(&huart1, (uint8_t *)toPost, strlen(toPost), 1000);
HAL_UART_Receive(&huart1, rxBuffer, 512, 1000);
}
HAL_Delay(1000);
}
/* USER CODE END WHILE */

/* USER CODE BEGIN 3 */

/* USER CODE END 3 */
}

/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};

/** Initializes the RCC Oscillators according to the specified parameters

* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}

/** Initializes the CPU, AHB and APB buses clocks

*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)

{
Error_Handler();
 }
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}

/** Enables the Clock Security System

*/
HAL_RCC_EnableCSS();
}

/**
* @brief ADC1 Initialization Function
* @param None
* @retval None
*/
static void MX_ADC1_Init(void)
{
ADC_ChannelConfTypeDef sConfig = {0};

hadc1.Instance = ADC1;
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc1.Init.ContinuousConvMode = ENABLE;
hadc1.Init.DiscontinuousConvMode = DISABLE;
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc1.Init.NbrOfConversion = 1;
if (HAL_ADC_Init(&hadc1) != HAL_OK) {
Error_Handler();
}

sConfig.Channel = ADC_CHANNEL_9;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) {
Error_Handler();
}
}

/**
* @brief USART1 Initialization Function
* @param None
* @retval None
*/
static void MX_USART1_UART_Init(void)
{

/* USER CODE BEGIN USART1_Init 0 */

/* USER CODE END USART1_Init 0 */

/* USER CODE BEGIN USART1_Init 1 */

 /* USER CODE END USART1_Init 1 */
huart1.Instance = USART1;
huart1.Init.BaudRate = 115200;
huart1.Init.WordLength = UART_WORDLENGTH_8B;
huart1.Init.StopBits = UART_STOPBITS_1;
huart1.Init.Parity = UART_PARITY_NONE;
huart1.Init.Mode = UART_MODE_TX_RX;
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(&huart1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN USART1_Init 2 */

/* USER CODE END USART1_Init 2 */

/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
/* USER CODE BEGIN MX_GPIO_Init_1 */
/* USER CODE END MX_GPIO_Init_1 */

/* GPIO Ports Clock Enable */

__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();

/* USER CODE BEGIN MX_GPIO_Init_2 */

/* USER CODE END MX_GPIO_Init_2 */
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}

#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */