0% found this document useful (0 votes)
10 views

STW75NF20 STMicroelectronics

Uploaded by

Iot Tuga
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
10 views

STW75NF20 STMicroelectronics

Uploaded by

Iot Tuga
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

STB75NF20

STP75NF20 - STW75NF20
N-channel 200V - 0.028Ω - 75A - D2PAK - TO-220 - TO-247
Low gate charge STripFET™ Power MOSFET

General features

www.DataSheet4U.com
Type VDSS RDS(on) ID

STB75NF20 200V <0.034Ω 75A 3


1
STP75NF20 200V <0.034Ω 75A
D²PAK
TO-247
STW75NF20 200V <0.034Ω 75A

■ Exceptional dv/dt capability


■ Low gate charge 3
2
1
■ 100% Avalanche tested
TO-220

Description
This Power MOSFET series realized with
STMicroelectronics unique STripFET™ process Internal schematic diagram
has specifically been designed to minimize input
capacitance and gate charge. It is therefore
suitable as primary switch in advanced high-
efficiency isolated DC-DC converters

Applications
■ Switching application

Order codes
Part number Marking Package Packaging
STB75NF20 75NF20 D²PAK Tape & reel
STP75NF20 75NF20 TO-220 Tube
STW75NF20 75NF20 TO-247 Tube

March 2007 Rev 2 1/16


www.st.com 16
Contents STB75NF20 - STP75NF20 - STW75NF20

Contents

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................. 6

3
www.DataSheet4U.com
Test circuit ................................................ 9

4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2/16
STB75NF20 - STP75NF20 - STW75NF20 Electrical ratings

1 Electrical ratings

Table 1. Absolute maximum ratings


Symbol Parameter Value Unit

VDS Drain-source voltage (VGS = 0) 200 V


VGS Gate-source voltage ± 20 V
ID Drain current (continuous) at TC = 25°C 75 A
www.DataSheet4U.com ID Drain current (continuous) at TC = 100°C 47 A
(1)
IDM Drain current (pulsed) 300 A
Derating factor 1.52 W/°C
dv/dt Peak diode recovery voltage slope 15 V/ns
PTOT Total dissipation at TC = 25°C 190 W
TJ Operating junction temperature
-50 to 150 °C
Tstg Storage temperture
1. ISD < 75A, di/dt < 400A/µs, VDD < 160

Table 2. Thermal resistance


Value
Symbol Parameter Unit
TO-220/D²PAK TO-247

RthJC Thermal resistance junction-case max 0.66 °C/W


RthJ-pcb (1) Thermal resistance junction-pcb max 34 -- °C/W
RthJA Thermal resistance junction-ambient max 62.5 40 °C/W
Maximum lead temperature for soldering
Tl 300 °C
purpose
1. When mounted on inch²FR-4 board (t < 10µs)

Table 3. Avalanche characteristics


Symbol Parameter Max value Unit

Avalanche current, repetitive or not-repetitive


IAR 37 A
(pulse width limited by TJ max)
Single pulse avalanche energy
EAS 205 mJ
(starting TJ= 25°C, Id= Iar, Vdd=50V)

3/16
Electrical characteristics STB75NF20 - STP75NF20 - STW75NF20

2 Electrical characteristics

(TCASE=25°C unless otherwise specified)

Table 4. On/off states


Symbol Parameter Test conditions Min. Typ. Max. Unit

Drain-source breakdown
V(BR)DSS ID = 1mA, VGS= 0 200 V
voltage

www.DataSheet4U.com Zero gate voltage drain VDS = Max rating, 1 µA


IDSS
current (VGS = 0) VDS = Max rating @125°C 10 µA
Gate body leakage current
IGSS VDS = ± 20V ±100 nA
(VDS = 0)
VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA 2 3 4 V
Static drain-source on
RDS(on) VGS= 10V, ID= 37A 0.028 0.034 Ω
resistance

Table 5. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit

gfs(1) Forward transconductance VDS = 15V, ID= 37A 40 S

Ciss Input capacitance


3260 pF
Output capacitance VDS = 25V, f = 1 MHz,
Coss 640 pF
Reverse Transfer VGS =0
Crss 110 pF
Capacitance
Qg Total gate charge VDD= 160V, ID=75A, 84 nC
Qgs Gate-source charge VGS= 10V 18 nC
Qgd Gate-drain charge (see Figure 16) 34 nC

1. Pulsed: pulse duration = 300µs, duty cycle 1.5%

Table 6. Switching times


Symbol Parameter Test conditions Min. Typ. Max. Unit

td(on) Turn-on delay time 53 ns


VDD = 100V, ID = 37A
tr Rise time 33 ns
RG= 4.7Ω, VGS= 10V,
td(off) Turn-off delay time 75 ns
(see Figure 15)
tf Fall time 29 ns

4/16
STB75NF20 - STP75NF20 - STW75NF20 Electrical characteristics

Table 7. Source drain diode


Symbol Parameter Test conditions Min. Typ. Max. Unit

ISD Source-drain current 75 A


ISDM(1) Source-drain current (pulsed) 300 A

VSD(2) Forward on voltage ISD = 75A, VGS = 0 1.6 V

trr Reverse recovery time ISD = 75A,VDD = 100V 222 ns


Qrr Reverse recovery charge di/dt = 100 A/µs 2.18 µC
www.DataSheet4U.com IRRM Reverse recovery current Tj = 25°C (see Figure 20) 19 A

trr Reverse recovery time ISD = 75A, VDD = 100V 267 ns


Qrr Reverse recovery charge di/dt = 100 A/µs 3 µC
IRRM Reverse recovery current Tj = 150°C (see Figure 20) 22 A

1. Pulse with limited by maximum temperature


2. Pulsed: pulse duration = 300µs, duty cycle 1.5%

5/16
Electrical characteristics STB75NF20 - STP75NF20 - STW75NF20

2.1 Electrical characteristics (curves)


Figure 1. Safe operating area for TO-220 / Figure 2. Thermal impedance for TO-220 /
D²PAK D²PAK

www.DataSheet4U.com

Figure 3. Safe operating area for TO-247 Figure 4. Thermal impedance for TO-247

Figure 5. Output characterisics Figure 6. Transfer characteristics

6/16
STB75NF20 - STP75NF20 - STW75NF20 Electrical characteristics

Figure 7. Normalized BVDSS vs temperature Figure 8. Static drain-source on resistance

www.DataSheet4U.com

Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations

Figure 11. Normalized gate threshold voltage Figure 12. Normalized on resistance vs
vs temperature temperature

7/16
Electrical characteristics STB75NF20 - STP75NF20 - STW75NF20

Figure 13. Source-drain diode forward Figure 14. Avalanche energy vs starting Tj
characteristics

www.DataSheet4U.com

8/16
STB75NF20 - STP75NF20 - STW75NF20 Test circuit

3 Test circuit

Figure 15. Switching times test circuit for Figure 16. Gate charge test circuit
resistive load

www.DataSheet4U.com

Figure 17. Test circuit for inductive load Figure 18. Unclamped inductive load test
switching and diode recovery times circuit

Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform

9/16
Package mechanical data STB75NF20 - STP75NF20 - STW75NF20

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK®


packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at : www.st.com

www.DataSheet4U.com

10/16
STB75NF20 - STP75NF20 - STW75NF20 Package mechanical data

TO-220 MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034
www.DataSheet4U.com b1 1.15 1.70 0.045 0.066
c 0.49 0.70 0.019 0.027
D 15.25 15.75 0.60 0.620
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F 1.23 1.32 0.048 0.052
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L30 28.90 1.137
øP 3.75 3.85 0.147 0.151
Q 2.65 2.95 0.104 0.116

11/16
Package mechanical data STB75NF20 - STP75NF20 - STW75NF20

TO-247 MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.
A 4.85 5.15 0.19 0.20
A1 2.20 2.60 0.086 0.102
www.DataSheet4U.com b 1.0 1.40 0.039 0.055
b1 2.0 2.40 0.079 0.094
b2 3.0 3.40 0.118 0.134
c 0.40 0.80 0.015 0.03
D 19.85 20.15 0.781 0.793
E 15.45 15.75 0.608 0.620
e 5.45 0.214
L 14.20 14.80 0.560 0.582
L1 3.70 4.30 0.14 0.17
L2 18.50 0.728
øP 3.55 3.65 0.140 0.143
øR 4.50 5.50 0.177 0.216
S 5.50 0.216

12/16
STB75NF20 - STP75NF20 - STW75NF20 Package mechanical data

D2PAK MECHANICAL DATA


TO-247 MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.

A 4.4 4.6 0.173 0.181

A1 2.49 2.69 0.098 0.106


www.DataSheet4U.com
A2 0.03 0.23 0.001 0.009

B 0.7 0.93 0.027 0.036

B2 1.14 1.7 0.044 0.067

C 0.45 0.6 0.017 0.023

C2 1.23 1.36 0.048 0.053

D 8.95 9.35 0.352 0.368

D1 8 0.315

E 10 10.4 0.393

E1 8.5 0.334

G 4.88 5.28 0.192 0.208

L 15 15.85 0.590 0.625

L2 1.27 1.4 0.050 0.055

L3 1.4 1.75 0.055 0.068

M 2.4 3.2 0.094 0.126

R 0.4 0.015

V2 0º 4º
3

13/16
Packaging mechanical data STB75NF20 - STP75NF20 - STW75NF20

5 Packaging mechanical data

D2PAK FOOTPRINT

www.DataSheet4U.com

TAPE AND REEL SHIPMENT

REEL MECHANICAL DATA


mm inch
DIM.
MIN. MAX. MIN. MAX.
A 330 12.992
B 1.5 0.059
C 12.8 13.2 0.504 0.520
D 20.2 0795
G 24.4 26.4 0.960 1.039
N 100 3.937
T 30.4 1.197

BASE QTY BULK QTY


TAPE MECHANICAL DATA
1000 1000
mm inch
DIM.
MIN. MAX. MIN. MAX.
A0 10.5 10.7 0.413 0.421
B0 15.7 15.9 0.618 0.626
D 1.5 1.6 0.059 0.063
D1 1.59 1.61 0.062 0.063
E 1.65 1.85 0.065 0.073
F 11.4 11.6 0.449 0.456
K0 4.8 5.0 0.189 0.197
P0 3.9 4.1 0.153 0.161
P1 11.9 12.1 0.468 0.476
P2 1.9 2.1 0.075 0.082
R 50 1.574
T 0.25 0.35 0.0098 0.0137
W 23.7 24.3 0.933 0.956
* on sales type

14/16
STB75NF20 - STP75NF20 - STW75NF20 Revision history

6 Revision history

Table 8. Revision history


Date Revision Changes

30-Jan-2007 1 First release


21-Mar-2007 2 Complete version

www.DataSheet4U.com

15/16
STB75NF20 - STP75NF20 - STW75NF20

www.DataSheet4U.com

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2007 STMicroelectronics - All rights reserved

STMicroelectronics group of companies


Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

16/16

You might also like