Accesorios Armstrong

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

FLOORING AND

INSTALLATION ACCESORIES
EXTRUDED VINYL PROFILES
FLOORING AND INSTALLATION ACCESORIES
EXTRUDED VINYL PROFILES

Feather Edge Skirting Flat Skirting X-pand Strip


Flexible vinyl skirting with a coved Flat, flexible vinyl skirting with tapered Flexible cover strip for installation over expansion and
base (toe) and tapered top edge for edges for use as a wall finish with control joints. Use in conjunction with sheet and tile vinyl
use as a wall finish. carpet installations, bump strips or flooring. May be heat welded to sheet vinyl. Available in
kick plates on doors. 2mm and 3mm thickness.

Wall Capping Tile Trim Tile Trim 8mm


Finishing strip to cover the exposed edge of vinyl wall or Reducing strip to provide a flush finish at floor covering Reducing strip to provide a flush finish at floor covering
coved floor sheet on vertical surfaces. Can also be used as a edges tapering to a neat finish with the adjacent floor. when installed on hardboard or cement sheet underlay
finishing strip to the exposed edge of floor vinyl. Available in 2mm, 3mm and 5mm thick. tapering to a neat finish with the adjacent floor.

Cove Fillet Cove Fillet Wedge Fillet


Provides a properly shaped radius section at floor to wall Provides a properly shaped radius section at floor to wall Diminishing strip used to equalise the thickness difference
transition to act as a supporting base for coved sheet vinyl transition to act as a supporting base for coved sheet vinyl between coved floor vinyl and Wallflex wall vinyl, allowing
flooring. Available in 20mm x 20mm. flooring. Available in 32mm x 32mm. a fully heat welded installation.

Stair Nosing Insert Safety Glo Strip 50mm SCAN* THIS CODE to learn more
Flexible insert for fitting to aluminium or brass stair nosing Flexible insert incorporating a glow in the dark stripe of about Extruded Vinyl Profiles.
to give a slip-resistant finish. high-quality photo luminescent pigment for faster charging
and longer glow. Suitable for: *Download a Free QR code reader
• Aluminium and brass stair nosing • Bump guards from your app store
• Low light directional aid Colours – Black and Glo

Please note: Recommendations are for guidance only. Refer to relevant local, state, and federal construction codes and standards for requirements. Variations may occur between
photographic images, samples and batches in terms of colour, shade, pattern or similar. All measurements are nominal.
FLOORING AND INSTALLATION ACCESORIES
EXTRUDED VINYL PROFILES

BLACK

GREY MIDNIGHT FLINT

OCEAN DUNE OCHRE

WHITE LATTE DENIM

PROFILE Size Ctn Qty Black Ochre White Dune Ocean Grey Latte Flint Midnight Denim
Skirting
Feathered Edge 100mm 3 x 15m
150mm 2 x 15m
Flat 100mm 3 x 30m
150mm 2 x 30m
300mm 1 x 30m
Wall Capping 8 x 15m
Tile Trim 2mm, 3mm, 5mm 8 x 15m
8mm 6 x 15m
X-pand Strip 2mm 4 x 15m
3mm 4 x 15m
Cove Fillet 20mm x 20mm 7 x 15m
32mm x 32mm 5 x 15m
Wedge Fillet 0.75mm 8 x 25m
0.50mm 5 x 40m
Stair Nosing Insert 50mm 4 x 26m
Safety Glo Strip 50mm 4 x 26m Black and Glo Stripe

Standard stocked item.


Additional colours available (Minimum quantity of 1 carton per colour and 1 carton per profile apply).
Contact your Armstrong Flooring Representative or Customer Service for further information.
Custom Colours?
Custom Colours are available on request for all profiles (Minimum quantities, 5 x carton per colour, per profile and 15% surcharge apply).
Contact your Armstrong Flooring Representative or Customer Service for further information.
Armstrong Flooring Skirting – The industry standard in flooring accessories.
Profile

Contact:

Armstrong Flooring Pty Ltd


29 – 39 Mills Road, Braeside, 3195 Victoria Australia

For further information and samples:


Australia Freecall 1800 632 624
Email [email protected] or contact us on the web

www.armstrongflooring.com.au M3007 October 2015

You might also like