DSP Reviewer
DSP Reviewer
Image processing
Neural networks
Pattern recognition
Digital communications
Biomedical applications
Speech processing
Underwater acoustics
Radar signal processing
Astronomy
Geophysical data analysis
Continuous time signals are often referred to as analog signals and they take on values in
continuous interval (a, b), where a can be -∞ and b, ∞.
Discrete time-signals on the other hand, are signals which are the preprocessed signals which
are to be used in digital signal processing
The process involved in converting a continuous time to discrete time signal is referred to as.
Sampling
A continuous time and discrete time signal vary in how they are expressed as a function. The
latter uses ________ as its function. Sample
Signals which have both time and amplitude are discrete and referred to as. Digital signal
Signal which exhibits rotational symmetry with respect to the origin is referred to as odd signal.
True
In audio signal processing, a microphone acts as the transducer in the system. True
Compression is the transformation of a collection of data typically into a smaller file size. True
Signal which exhibits rotational symmetry with respect to the origin is referred to as even
signal. False - Odd signal
Signal which can be expressed in mathematical form is referred to as discrete time signal. False -
Deterministic signal
If the signal can be expressed in mathematical form and exhibits a complete pattern in one
cycle, the signal is odd and periodic. False – periodic only
Signals are primarily classified into two: periodic and aperiodic. False - continuous time signal
and discrete time.
Classify the signals with the notation given below: x(t)= cos ωt - continuous-time, periodic,
even
Classify the signals with the notation given below: x(t)= sin ωt - deterministic, periodic, odd
Classify the signals with the notation given below: x(t) = 3 cos2.5t - continuous-time,
deterministic, aperiodic
Classify the signals with the notation given below: x[n] = 3 sin 2.5πn - discrete-time,
deterministic, periodic
Classify the signals with the notation given below: x(t) = e 2.5t - continuous-time, deterministic
A signal is described as an analog signal whose graph is symmetrical to the vertical axis and has
complete pattern in one cycle. The signal's classification is completely given as. continuous
time, even, deterministic and periodic
Which of the following signals is continuous time, deterministic, aperiodic? x(t) = 3e-2t
Which of the following signals is discrete-time, deterministic and odd? x[n] = 1.5 sin ωn
Which of the following is described by the notation x (t) = -x(-t) or x NO = -x(-n)? odd signal
Express x No= uNo – δNo – 0.5 δ(n-1) in sequence form. xNo = [ 0 0.5 1 1 1 …]
Compute for the minimum sampling resolution that could be represented by a 4 bit ADC? 1/15
If the signal needs to be represented in 100 gradations, how many bits are needed? 7
Going extremely higher than twice will also reconstruct the signal but is not practical. True
A train of unit sample sequence which is theoretically infinite is referred to as unit step
sequence. True
In practice, audio signals are sampled at 8 bits, 16 bits and 24 bits. True
If the sampling frequency is fs = 50 Hz, which among the signals will experience aliasing?
x(t) = sin 2π (50)t + cos 2π (25)t
What is the discrete signal obtained after sampling x(t) = 2.5 sin 200πt with f s = 250 Hz?
Which of the following sampling frequency give the lowest quality audio signal? 32 kHz