Scribd
Upload
26 views2 pages

Planmeca ProX Specs

The document describes an intraoral x-ray unit with features including adjustable voltage and current, pre-programmable exposure parameters, and mounting options. It provides technical specifications of the x-ray tube, filtration, voltage, current, exposure time, and duty cycle control.

Uploaded by

Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views2 pages

Planmeca ProX Specs

The document describes an intraoral x-ray unit with features including adjustable voltage and current, pre-programmable exposure parameters, and mounting options. It provides technical specifications of the x-ray tube, filtration, voltage, current, exposure time, and duty cycle control.

Uploaded by

Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1(2)

PLANMECA PROX intraoral x-ray unit

Introduction
Planmeca ProX is a microprocessor-
controlled intra-oral x-ray with high
frequency operated x-ray generator.
Planmeca ProX has 66 pre-programmable
exposure parameters for quick and easy
operation. Kilovoltage is adjustable between
60 – 70 kV and milliamperes are adjustable
from 2 – 8 mA for the optimum contrast and
density of the different objects. The
exposure time is selectable between 0.01 –
2.0 sec. in 24 visually detectable density
steps. For different film sensitivities there are
11 density steps for constant image density.
The small focal spot provides the high image
sharpness with a minimum distortion.
Main features
 Easy and accurate positioning, steady
arm with smooth action, very light weight
and compact size
 Very long reach (203 cm)
 Hygienic surfaces
 Hand held or fixed control panel, remote
installable
 Low dose constant potential generator,
very high operating frequency, small
focal spot, automatic compensation for mains voltage fluctuation
 Microprocessor controlled
 Adjustable anode voltage (60, 63, 66 and 70 kV), adjustable working range
 Adjustable anode current 2, 3, 4, 5, 6, 7, 8 mA
 Visually detectable density steps of exposure times
 Pre-programmable exposure parameters
 Optimised image quality for all techniques, outstanding definition and sharpness
 Short and long cone techniques (200 and 300 mm), density compensation for different cones
 11 density selections for different films
 Automatic duty cycle control
 Self-diagnosis system and help codes
 Mounting:
 Wall mounted (standard)
 Optional floor column mounted
 Optional ceiling mounted
 Optional single stud mounted (e.g. for pass-through mounting)

Planmeca_ProX_specs.docx EH 30/4/2015 Rights for changes reserved


2(2)

 Optional Planmeca Sovereign or Planmeca Compact Unit mounted


 Optional mobile cart mounted
 5 optional extensions arm lengths
 Digital imaging ready: integrated Planmeca ProSensor control box and connector
Technical specifications

Generator: Constant potential, microprocessor controlled, operating frequency


66 kHz
X-ray tube: Toshiba D-041SB
Focal spot: 0.4 mm according to IEC 60336
Cone diameter: 60 mm, round
36×45 mm, rectangular
Filtration: min 2 mm Al
Anode voltage: 60, 63, 66, 70 kV; ripple ±1kV
adjustable working range
KV rise time: 8 ms
Anode current: 2 – 8 mA DC, 1mA steps
Exposure time: 0.01- 2.0 s, 24 steps
SSD (standard/long) 200 mm round
300 mm round
300 mm rectangular
340 mm rectangular
Line voltage: 100/110-115/220-240 ±10%, 50/60Hz
Fusing: 15 AT / 8 AT
Duty cycle: 1:30, automatic control
Weight: 23 kg, total
4,5 kg, tube head
Reach: 152 cm, 165 cm, 178 cm, 191 cm, 203 cm

-EOF-

Planmeca_ProX_specs.docx EH 30/4/2015 Rights for changes reserved

You might also like