Pressure reducing valve, RE 26850/10.

05
Replaces: 02.03
1/6

pilot operated

Type DR 10 K

Size 10
Component series 3X
Maximum operating pressure 315 bar
Maximum flow 100 l/min
K4278/7

Table of contents Features

Contents Page – Cartridge valve
Features 1 – 4 pressure stages
Ordering code 2 – 4 adjustment elements, optional:
Standard types 2 • Rotary knob
• Sleeve with hexagon and protective cap
Function, section, symbol 2
• Lockable rotary knob with scale
Technical data 3 • Rotary knob with scale
Characteristic curves 4
Unit dimensions 5
Mounting cavity 6

Information on available spare parts:

www.boschrexroth.com/spc
2/6 Bosch Rexroth AG Hydraulics DR 10 K RE 26850/10.05

Ordering code

DR 10 K 3X Y M *

Pressure reducing valve, = DR Further details in clear text

pilot operated Seal material
Size 10 = 10 No code = NBR seals
Cartridge valve =K V= FKM seals
(other seals on enquiry)
Type of adjustment
Rotary knob =4 Caution!
Observe compatibility of seals with
Sleeve with hexagon and protective cap =5
hydraulic fluid used!
Lockable rotary knob with scale = 6 1)
Rotary knob with scale =7 M= Without check valve

Component series 30 to 39 = 3X Y= Pilot oil supply internal,

Pilot oil drain external
(30 to 39: unchanged installation and connection dimensions)
Pressure stage
50 = Secondary pressure up to 50 bar
1) H-key with material no. R900008158 is included 100 = Secondary pressure up to 100 bar
in the scope of supply. 200 = Secondary pressure up to 200 bar
315 = Secondary pressure up to 315 bar

Standard types

Type Material number Type Material number

DR 10 K5-3X/50YM R900422568 DR 10 K5-3X/50YMV R900430976
DR 10 K5-3X/100YM R900459508 DR 10 K5-3X/100YMV R900432731
DR 10 K5-3X/200YM R900438134 DR 10 K5-3X/200YMV R900438117
DR 10 K5-3X/315YM R900430682 DR 10 K5-3X/315YMV R900434144

Further standard types and components can

be found in the EPS (standard price list).

Function, section, symbol

Pressure control valves of type DR 10 K.. are pilot operated the chamber of spring (3) via orifice (7), pilot poppet (8) and
pressure reducing valves for installation into manifolds. They spring chamber (6) to service port 3. Main spool (1) moves to
are used to reduce a system pressure. The secondary pressure the control position and keeps the pressure value set on spring
is adjusted by means of adjustment element (4). (5) constant in service port 1.
In the initial position, the valves are open. Hydraulic fluid can The pilot oil is always externally drained from spring chamber
flow from service port 2 to 1 without any restrictions. The (6) via service port 3.
pressure in service port 1 simultaneously acts on main spool
Note!
(1) and via orifice (2) on the spring-loaded inner side of main
spool (1). In addition, it acts on pilot poppet (8) via orifice (7). Backpressures (service port 3) add to the set pressure.
When the pressure in service port 1 rises above the value set
on spring (5), pilot poppet (8) opens. Hydraulic fluid flows from
4 6 5 8 7
2
3 1
1 = Service port 1 (A)
2 = Service port 2 (B)
3 = Service port 3 (Y)

Type DR 10 K5-3X/.YM 2 3
3 2 1
RE 26850/10.05 DR 10 K Hydraulics Bosch Rexroth AG 3/6

Technical data (for applications outside these parameters, please consult us!)

General
Weight kg 0.2
Installation orientation Optional
Ambient temperature range °C –30 to +80 (NBR seals)
–20 to +80 (FKM seals)

Hydraulic
Maximum operating pressure 1) – Service port 2 (P) bar 315
Secondary pressure – Service port 1 (A) bar 50; 100; 200; 315
Max. permissible backpressure 1) – Service port 3 (T) bar 315
Maximum flow l/min 100
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524 2); fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221); HETG
(rape seed oil) 2); HEPG (polyglycols) 3); HEES (synthetic
esters) 3); other hydraulic fluids on enquiry
Hydraulic fluid temperature range °C –30 to +80 (NBR seals)
–20 to +80 (FKM seals)
Viscosity range mm2/s 10 to 800
Max. permissible degree of contamination of the hy- Class 20/18/15 4)
draulic fluid - cleanliness class to ISO 4406 (c)

1) Caution! The maximum operating pressure is the sum of

the secondary pressure and the backpressure!
2) Suitable for NBR and FKM seals
3) Suitable only for FKM seals
4) The cleanliness classes specified for components must be
adhered to in hydraulic systems. Effective filtration prevents
malfunction and, at the same time, prolongs the service life
of components.
For the selection of filters, see data sheets RE 50070,
RE 50076, RE 50081, RE 50086 and RE 50088.
4/6 Bosch Rexroth AG Hydraulics DR 10 K RE 26850/10.05

Characteristic curves (measured with HLP46, ϑoil = 40 °C ± 5 °C)

pA-qV characteristic curves pA-qV characteristic curves

(within the range up to 50 bar)
315
300 60
Secondary pressure in bar →

250 50

Secondary pressure in bar →

200 40

150 30

100 20

50 10
5
4
0 0
0 20 40 60 80 100 0 20 40 60 80 100
Flow in l/min → Flow in l/min →

Δpmin-qV characteristic curve

qV St-qV characteristic curves at Δp (pE – pA) 30
Minimum ressure differential in bar →

25
0,6

0,5 20
Pilot oil flow in l/min →

2
0,4
3 15
0,3
10
0,2
1
5
0,1

0 0
0 20 40 60 80 100 0 20 40 60 80 100

Flow in l/min → Flow in l/min →

1 2 → 1 (P → A)
2 Δp = 50 bar
3 Δp = 250 bar
4 Actuator resistance, depending on system
5 Lowest settable secondary pressure pA for all
pressure stages
RE 26850/10.05 DR 10 K Hydraulics Bosch Rexroth AG 5/6

Unit dimensions (nominal dimensions in mm)

32

18
2 7 1 4 3

30

max 114
35
6 9 8 0 2 1

max 90
max 62
55

LS
0

3 8
49,4

1 Type of adjustment "4" 1 = Service port 1 (A)

2 = Service port 2 (P)
2 Type of adjustment "5"
3 = Service port 3 (Y)
3 Type of adjustment "6"
LS = Location Shoulder
4 Type of adjustment "7"
5 Space required to remove key
6 Locknut A/F 24
7 Hexagon A/F 10
8 Hexagon A/F 30, tightening torque for screwing in
MT = 50 Nm
6/6 Bosch Rexroth AG Hydraulics DR 10 K RE 26850/10.05

Mounting cavity; 3 service ports; thread M24 x 1 (nominal dimensions in mm)

Rz 16
Ø0,02 A B C
Ø30
Ø26H8
0,01 D
Ø25H8
A
M24 x 1
B

1,2+0,1
LS
0

10+0,1
Rz 8
19,5±0,5
21+0,2
31+0,2

Ø3
35,5±0,5

3
42+0,2
49,5 1)
51

2
Rz 16
max Ø10

Rz 8 1
max Ø10,5
Ø20H8
C
Ø23H9

1 = Service port 1 (A)

2 = Service port 2 (P), can be arranged optionally around the
circumference
3 = Service port 3 (Y), can be arranged optionally around the
circumference
LS = Location Shoulder

1) Depth of fit

Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Fax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not
[email protected] release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process of
wear and aging.
RE 26850/10.05 DR 10 K Hydraulics Bosch Rexroth AG 7/6

Notes

Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Fax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not
[email protected] release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process of
wear and aging.
8/6 Bosch Rexroth AG Hydraulics DR 10 K RE 26850/10.05

Notes

Bosch Rexroth AG © This document, as well as the data, specifications and other information
Hydraulics set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
Zum Eisengießer 1 reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain application
Fax +49 (0) 93 52 / 18-23 58 can be derived from our information. The information given does not
[email protected] release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process of
wear and aging.